The document is a checklist for inspecting a bar bending machine. It contains 12 items to check, including ensuring the machine is on a stable concrete platform, properly earthed, guarded, and has emergency stop switches and limit switches in working condition. Signatures from the contractor, project management consultant, and client are required to verify the inspection.
The document is a checklist for inspecting a bar bending machine. It contains 12 items to check, including ensuring the machine is on a stable concrete platform, properly earthed, guarded, and has emergency stop switches and limit switches in working condition. Signatures from the contractor, project management consultant, and client are required to verify the inspection.
The document is a checklist for inspecting a bar bending machine. It contains 12 items to check, including ensuring the machine is on a stable concrete platform, properly earthed, guarded, and has emergency stop switches and limit switches in working condition. Signatures from the contractor, project management consultant, and client are required to verify the inspection.
1 Erected in a firm base concrete platform. 2 Machine is grouted properly/ Base wheel stopper provided 3 Double Body Earthing is provided 4 D.B box connected with the machine is equipped with ELCB with 30mA. 5 Emergency switch is available in working condition ( Front side and back side of the m/c) 6 Power on & off switch with indicator light are available in working condition. 7 Belt and other internal moving parts are covered/Guarded. 8 No oil leakage 9 Both side hand guard is available. 10 Limit switch (Both Side, below the job plate) are in working condition 11 Availability of standard limit switch lock pin. (Usage of nail & other material is Not acceptable) 12 Rubber mat provided in front of the machine