Professional Documents
Culture Documents
EXCELLENT PERFORMANCE
EXCELLENT QUALITY
www.liutech.com.cn
Company introduction
Liuzhou Tech Machinery Co., Ltd. - Customer Center
On April 27, 2002, the Swedish Atlas Copco Group wholly
acquired Liuzhou Fidelity Machinery Co., Ltd., which was
established in 1994. "LIUTECH" became the first brand acquired
by Atlas Copco Group in China, specializing in the production
and sales of "LIUTECH" brand stationary and partable screw air
compressors and Air Treatment equipment in the Chinese
market.
Efficient performance
Thus, Liuzhou Tech Machinery Co., Ltd. is responsible for all the
portable compressor business of the LIUTECH brand, while
Liuzhou Tech Machinery Equipment Co., Ltd. and its branches
are in charge of the sales and service of the stationary
compressor of the LIUTECH brand. Atlas Copco original high-efficiency air end, more
energy-saving than similar products
LIUTECH has always been adhering to the brand promise of "we Enlarged cooling area, resistant to high temperature
take care of your compressed air", and constantly develops and
provides customers with energy-efficient compressed air environment
system solutions, including a full range of oil-injected screw
compressors, water-injected screw compressors, oil-free
scrolls type compressors, refrigerated dryers, Desiccant
dryers, air reciever tank , compressad air filters, piping Solution
and energy recovery, as well as various service products.
Easy maintenance
Reasonable layout, humanized design, mature
For more information, please review our website: www.liutech.com.cn models
Routine maintenance and breakdown maintenance
are all very easy
We care about
your compressed air
SAP exclusive patent design maximizes compression The highest energy efficiency of the fixed speed motor
efficiency, saving 5% energy compared to similar can reach the level 1 energy efficiency.
products on the market. Air cooling permanent magnet variable speed motor
level 1 energy efficiency, protection class Ip55
SKF heavy load bearing, high stiffness rotor with
Oil-cooling permanent magnet variable speed motor
durability and stability
exceeding level 1 energy efficiency, protection class
Precise machining, excellent Ip66
assembly, low vibration and long High efficiency SKF bearing, long life
service life
IE5 high efficiency motor, maximum efficiency up to 97% The controller AIRLOGIC2 T AIRLOGIC2 T
ICOS module Y Y
Oil cooling motor, no fan motor energy consumption
Fixed speed motor IE2 IE4
Protection class IP66, anti-high pressure waterjet,
no dust entry
Variable speed motor Air cooling permanent magnet IE4 Oil cooling permanent magnet IE5
Insulation class H, can withstand the highest
temperature rise of 125℃, the maximum
allow able temperature of the winding 180℃ Air water separator Y Y
High energy efficiency and lower operating cost Filter pressure difference alarm Y Y
Optional specifications
Nano air filter
LU series compressor LU series high energy
Optional specifications efficiency compressor
Imported filter material as the substrate, there are nano LU160(W) - 250(W) LU110(W)+ -160(W)+
fiber melt-blown film on the surface
Accuracy 1um, can effectively filter dust and impurities, Siemens programmable controller Y Y
protect the air end and oil and air line system.
Motor IE3 IP55 Y Y
High tensile strength, better burst resistance, can be
regularly purged for cleaning in coordination with Soft start Y Y
differential pressure warning of the filters, so to
increase the service life of the filter elements. Explosion-proof motor Y Y
High ash capacity, specially designed for heavy dust,
high impurities in the harsh environment 60 HZ frequency Y Y
660 V voltage Y Y
Technical specifications of LU series fixed speed compressor Technical specifications of LU series high energy efficiency fixed speed compressor
LU110(W)-7G 7 21.2 LU110(W)-8+ 8 20.4 110 78(75) DN80 3140(3040) 3.6 5.2~15.6 G1 1/4"
LU110(W)-8G 8 20.0 G 2"Air cooling; LU110(W)-10+ 10 18.9
110 74 Dn65 1870(2400) 3 3.5~10.5 R1 1/4"
LU110(W)-10G 10 17.1 Water cooling
LU132(W)-7+ 7 26.3
LU110(W)-13G 13 14.3 LU132(W)-8+ 8 24.5 132 78(75) DN80 3230(3130) 3.6 5.2~15.6 G1 1/4"
LU132(W)-7G 7 25.0 LU132(W)-10+ 10 22.9
LU200(W)-7 7 36.8
3450(3240)/380V
LU200(W)-8 8 34.4 200 80(77) DN100 3560(3350)/6KV 7 8.6-24 G 2"
4060(3850)/10KV Technical specifications of LU series double air end water cooling compressor
LU200(W)-10 10 31.3
LU250(W)-7 7 45.8 Working Capactiy The motor Noise level Outlet size Weight Cooling
3620(3410)/380V Model pressure (air flow rate) power water amount Water inlet and outlet
bar m 3/min kW dB(A) mm kg m3/hr
LU250(W)-8 8 43.3 250 80(77) DN100 3730(3520)/6KV 7.8 10.3-30 G 2"
4180(3970)/10KV LU400W-8 8 69.8
LU250(W)-10 10 39.0
9060(6KV)
LU400W-10 10 60.0 400 81 DN150 16-48 G 2"
LU280(W)-7 7 52.4 9890(10KV)
5925(5490)/380V LU400W-13 13 49.5
LU280(W)-8 8 50.0 280 78(78) DN125 6065(5630)/6KV 7.8 12-36 G 2"
6565(6130)/10KV LU450W-8 8 78.0
LU280(W)-10 10 43.7
9125(6KV)
LU450W-10 10 67.9 450 81 DN150 17-51 G 2"
LU315(W)-7 7 55.0 9945(10KV)
6350(5730)/380V
LU450W-13 13 56.6
LU315(W)-8 8 54.8 315 80(78) DN125 6410(5790)/6KV 12 13-39 G 2"
7520(6900)/10KV LU500W-8 8 85.8
LU315(W)-10 10 50.7
10050(6KV)
LU500W-10 10 75.4 500 81 DN150 18-54 G 2"
LU355(W)-7 0 63.5 10190(10KV)
6380(5760)/380V
LU500W-13 13 63.4
LU355(W)-8 8 63.3 355 80(79) DN125 6800(6180)/6KV 12 14-42 G 2"
7520(6900)/10KV LU560W-8 8 96.5 560 81 DN150 10100(6KV) 19-57 G 2 1/2"
LU355(W)-10 10 56.1 10330(10KV)
Reference working conditions: Note: 1. Power supply: 380V/3/50HZ, special power supply can be customized, please consult Liutech for details.
2.The 13bar units can be customized, please consult Liutech for details.
Compressor performance parameters are based on ISO 1217, Edition 4, 2009, Annex
3.The temperature of inlet water for the water cooling units should be less than 35℃, and the water pressure
The noise level is measured at a distance of 1m, according to the standard ISO2151: 2004, ISO9614/2; tolerance 3dB(A)
should be 0.2Mpa-0.6Mpa; At the lowest water volume, the temperature difference between the inlet and
Absolute intake pressure: 1 bar, intake temperature: 20°C outlet water is 24℃; at the maximum water volume, the temperature difference between the inlet and outlet
water is 8℃; the water volume should be determined according to the water quality.
4.The specific dimensions are subject to the drawings provided.
5.Technical specifications will be updated without notice.
Since screw compressors can achieve the purpose of changing the displacement by adjusting the screw speed, we specially
Working Capactiy The motor Cooling customized LIUTECH brand inverters to match permanent magnet variable speed motors, and launched the LU PM(+)
power Noise level Outlet size Weight Fan power
Model pressure (air flow rate) water amount Water inlet series permanent magnet variable speed screw compressors. This series of variable speed equipment can adapt to harsh
and outlet environments and is stable and reliable; it can control the speed of the compressor permanent magnet motor according to
bar m3 /min kW dB(A) mm kg kW
3
m /hr the user's actual air consumption, and the actual power increases or decreases as per the increase or decrease of the air
consumption, so the energy can be used more effectively for air compression; LU PM(+) series variable speed technology
LU110(W)-7G IVR 7 6.4-21.2 can not only save up to 30% of energy, but also provide more accurate pressure control, so is the best energy-saving
solution for modern factories.
LU110(W)-8G IVR 8 6.0-20.0 G 2" Air cooling;
110 74 Dn65 2070(2490) 3 3.5~10.5 R1 1/4"
LU110(W)-10G IVR 10 5.1-17.1 Water cooling Energy saving
Traditional compressors usually use ON/OFF or proportional adjustment systems to adjust the air volume by adjusting the
LU110(W)-13G IVR 13 4.3-14.3 opening of the compressor's air inlet. This adjustment method can meet the actual air consumption requirements, but during
the adjustment process, the compressor speed is maintained at the rated speed, and the friction work consumed by the
LU132(W)-7G IVR 7 7.5-25.0 compressor and the cooling liquid stirring work will not be reduced. Therefore, although the air consumption decrease, but
the actual power consumption reduction is very limited. The variable speed adjustment can reduce the actual power
LU132(W)-8G IVR 8 7.3-24.3 G 2" Air cooling; consumption of the variable speed compressor close to the same proportion, and the energy can be effectively used for air
132 75 Dn65 2330(2640) 3 5.2~15.6 R1 1/4" compression.
LU132(W)-10G IVR 10 6.3-21.0 Water cooling Energy consumption
Change diagram of air load used by a customer
LU132(W)-13G IVR 13 5.1-17.0 Energy saved
Monday to Friday
The average energy
LU160(W) PM 7/8/10 9.0-30.1 160 78(75) DN80 2890(2790) 5.4 6.0-18.0 G1 1/4" Saturday consumption
Sunday
LU180(W) PM 7/8/10 9.8-32.7 180 78(75) DN80 2960(2860) 5.4 6.8-20.4 G1 1/4"
Normal comp
LU200(W) PM 7/8/10 10.7-35.8 200 80(77) DN100 4110(3900) 7 8.6-24 G 2" ressor
Frequency
LU250(W) PM 7/8/10 12.8-42.6 250 80(77) DN100 4280(4070) 7.8 10.3-30 G 2" converter
compressor
0 Air consumption
0 100%
6 12 18 24
Hour
Technical specifications of LU series high energy efficiency oil cooling permanent magnet variable speed compressor
Pressure smoothly Start without impact
Automatically track the change of the system air volume, The variable speed start mode greatly reduces the impact
Working Capactiy The motor Cooling and use PID (proportional, differential, integral) method to of the compressor start on the power grid and mechanical
pressure power Noise level Outlet size Weight Fan power
Model
(air flow rate) water amount Water inlet accurately adjust the speed of the compressor to keep the parts, so can extend the life of the compressor.
3
and outlet system pressure stable.
bar m3 /min kW dB(A) mm kg kW m /hr
Pressure diagram Start the ammeter
LU110(W)-8 PM+ 7/8 6-23.3
Pressure change curve
P Pressure of normal compressor Saved part Current (%)
110 78(75) DN80 2370(2270) 2.2 5.2~15.6 G1 1/4" 800
LU110(W)-10 PM+ 10 5.9-19.2 Star triangle
8
Direct start
7/8 6- 27.3 600
LU132(W)-8 PM+ Soft start
7
132 78(75) DN80 2420(2310) 3.5 5.2~15.6 G1 1/4" variable speed
LU132(W)-10 PM+ 10 5.9-22.8 Pressure change curve 400
0.1 bar
of IVR compressor
G series LD
refrigerated air dryer
C series V series
Inline filte Ultra-precision filter oil steam filter
Hospitals, pharmaceuticals,
Solid Moisture Oil mist Food and beverage
Technical specifications of LR standard Standard working conditions: ambient temperature: 25℃, inlet temperature: 35℃, working pressure :7bar,
LF E standard series filter specifcations Standard working conditions: working pressure: 7barg, intake oil content: 10 mg/m3 (V-type: 0.01mg/m3)
Operating conditions: maximum working pressure: 13bar, ambient temperature: 5 ~ 45℃, maximum intake
series refrigerated air dryer temperature: 55℃
Operating conditions: working pressure: 1 ~ 16 bar(g), inlet temperature: 1 ~ 66 ℃(V-type: 1 ~ 35℃)
Capactiy Installed Inlet and Pressure Pressure drop Power supply Condensed Fan Precise oil Ultra precision Ultra Flow rate Coupling size Weight Configuration
Weight Oil steam Precision dust
Model (air flow rate) power Refrigerant outlet size dew point water outlet protection removal oil removal removal precision dust Differential Automatic Manual
3
m /min W kg G ℃ bar kW mm class removal m /min G
3
Kg
pressure
indicator
drain valve ball valves
LR13 1.3 360 30 R134a G1" 3~10 0.1 230/1/50 6mm IP42 LF9e G LF9e C LF9e V LF9e S LF9e D 0.9 3/8" 1 No No Yes
LF18e G LF18e C LF18e V LF18e S LF18e D 1.8 1/2" 1.1 No No Yes
LR21 2.1 364 34 R134a G1" 3~10 0.2 230/1/50 6mm IP42
LF25e G LF25e C LF25e V LF25e S LF25e D 2.5 1/2" 1.3 No No Yes
LR40 4 700 55 R410A G1" 3~10 0.4 230/1/50 6mm IP54
LF35e G LF35e C LF35e V LF35e S LF35e D 3.5 1" 1.9 No No Yes
LR66 6.6 951 60 R410A G1.5" 3~10 0.25 230/1/50 6mm IP54
LF60e G LF60e C LF60e V LF60e S LF60e D 6 1" 2.1 No No Yes
LR85 8.5 988 68 R410A G1.5" 3~10 0.2 230/1/50 8mm IP54 LF105e G LF105e C LF105e V LF105e S LF105e D 10.5 1 1/2" 4.2 No No Yes
LR105 10.5 1000 75 R410A G2" 3~10 0.3 230/1/50 8mm IP54 LF140e G LF140e C LF140e V LF140e S LF140e D 14 1 1/2" 4.5 No No Yes
LR140 14 1674 110 R410A G2" 3~10 0.2 230/1/50 8mm IP54 LF175e G LF175e C LF175e V LF175e S LF175e D 17.5 1 1/2" 4.6 No No Yes
LF260e G LF260e C LF260e V LF260e S LF260e D 26 2" 6.9 No No Yes
LR175 17.5 1750 126 R410A G2" 3~10 0.2 230/1/50 8mm IP54
LF380e G LF380e C LF380e V LF380e S LF380e D 38 3" 11 No No Yes
LR220 22 3380 140 R410A G2.5" 3~10 0.3 230/1/50 10mm IP54
LF490e G LF490e C LF490e V LF490e S LF490e D 49 3" 12.6 No No Yes
LR260 26 3850 162 R410A G2.5" 3~10 0.3 230/1/50 10mm IP54
Technical specifications of LF high efficiency series filter
Technical specifications of LD high efficiency Standard working conditions: ambient temperature: 25℃, inlet temperature: 35℃, working pressure :7bar,
Precise oil Ultra precision Coupling size
Configuration
Operating conditions: maximum working pressure: 13bar, ambient temperature: 5 ~ 45℃, maximum intake Precision dust Ultra precision Flow rate Weight
series small refrigerated air dryer temperature: 60℃
removal oil removal removal dust removal
G kg
Differential
pressure
Automatic
drain valve
Manual
ball valves
indicator
Capactiy Installed Weight Inlet and Pressure Condensed Fan
Model power outlet size dew point Pressure drop Power supply water outlet LF9 FG LF9 FC LF9 FS LF9 FD 0.9 3/8" 1 Yes Yes Yes
(air flow rate) Refrigerant protection
m3 /min W kg G ℃ bar kW mm class LF18 FG LF18 FC LF18 FS LF18 FD 1.8 1/2" 1.1 Yes Yes Yes
LD-10 1 222 30 R134a G3/4" 3~7 0.25 230/1/50 6mm 42 LF25 FG LF25 FC LF25 FS LF25 FD 2.5 1/2" 1.3 Yes Yes Yes
LD-15 1.5 360 32 R134a G1" 3~7 0.25 230/1/50 6mm 42 LF35 FG LF35 FC LF35 FS LF35 FD 3.5 1" 1.9 Yes Yes Yes
LF60 FG LF60 FC LF60 FS LF60 FD 6 1" 2.1 Yes Yes Yes
LD-21 2.1 364 36 R134a G1" 3~7 0.15 230/1/50 6mm 42
LF105 FG LF105 FC LF105 FS LF105 FD 10.5 1 1/2" 4.2 Yes Yes Yes
LD-35 3.5 951 60 R410A G1" 3~7 0.14 230/1/50 6mm 54
LF140 FG LF140 FC LF140 FS LF140 FD 14 1 1/2" 4.5 Yes Yes Yes
LD-45 4.5 988 68 R410A G1.5" 3~7 0.1 230/1/50 6mm 54
LF175 FG LF175 FC LF175 FS LF175 FD 17.5 1 1/2" 4.6 Yes Yes Yes
LD-60 6 1000 75 R410A G1.5" 3~7 0.1 230/1/50 6mm 54 LF260 FG LF260 FC LF260 FS LF260 FD 26 2" 6.9 Yes Yes Yes
LD-75 7.5 1125 85 R410A G2" 3~7 0.1 230/1/50 6mm 54 LF380 FG LF380 FC LF380 FS LF380 FD 38 3" 11 Yes Yes Yes
LD-90 9 1674 120 R410A G2" 3~7 0.1 230/1/50 6mm 54 LF490 FG LF490 FC LF490 FS LF490 FD 49 3" 12.6 Yes Yes Yes
Standard working condition: inlet temperature: 40-45℃ working pressure: 0.7-1.0MPa
LD-115 11.5 1700 130 R410A G2.5" 3~7 0.25 230/1/50 6mm 54 Technical specifications of LE LA series Intake oil content: ≤0.1mg/m3
Dew point temperature: -40℃
LD-150 15 1900 135 R410A G2.5" 3~7 0.25 230/1/50 6mm 54 desiccant air dryer Power supply: 220V/1PH/ 50Hz;380V/3PH/50HZ(LE100E-LE750E)
Standard working conditions: ambient temperature: 25℃, inlet temperature: 35℃, working pressure :7bar, LE20E LA20E 2.6 G1" 1.5 0.1 245 233
Technical specifications of LD high Cooling water pressure :2.5-4bar, cooling water temperature :32℃
Operating conditions: maximum working pressure: 10bar, ambient temperature: 5 ~ 45℃,
LE30E LA30E 3.8 G1" 2.0 0.1 285 271
efficiency series of large refrigerated air dryer Maximum intake temperature: 55℃, cooling water temperature: 25-35℃
LE40E LA40E 5.5 G1-1/2" 2.0 0.1 385 366
Capactiy Installed Inlet and Pressure Pressure Power supply Condensed Cooling water
power Weight dew point drop water outlet connection size Weight
LE50E LA50E 7.2 G1-1/2" 2.5 0.2 585 556
Model (air flow rate) Refrigerant outlet size
m3 /min W Kg G ℃ bar KW mm G L/min LE60E LA60E 8.5 G1-1/2" 2.5 0.2 585 556
LD250A 25 2950 180 R410A G2.5" 7 0.15 230/1/50 12 —— —— LE75E LA75E 11 G2" 3.0 0.2 793 753
LD350A 35 4600 325 R410A DN100 FL 7 0.15 380/3/50 16 —— —— LE85E LA85E 13.5 G2" 3.5 0.2 850 808
LE100E LA100E 15.2 G2" 4.5 0.2 890 846
LD450A 45 4200 350 R410A DN100 FL 7 0.15 380/3/50 16 —— ——
LE125E LA125E 18.5 DN65 4.5 0.2 980 931
LD500A 50 5433 350 R410A DN100 FL 7 0.15 380/3/50 16 —— ——
LE150E LA150E 22 DN80 6.0 0.3 1208 1148
LD600A 60 7871 550 R410A DN150 FL 7 0.16 380/3/50 16 —— —— LE175E LA175E 25.5 DN80 6.0 0.3 1368 1300
LD750A 75 8769 600 R410A DN150 FL 7 0.16 380/3/50 16 —— —— LE185E LA185E 28.5 DN80 7.0 0.3 1450 1378
LD250W 25 2900 205 R410A G2.5" 7 0.15 230/1/50 12 G3/4" 41.7 LE200E LA200E 30 DN100 7.5 0.3 1598 1518
LE250E LA250E 35 DN100 8.0 0.3 1798 1708
LD350W 35 4600 325 R410A DN100 FL 7 0.15 380/3/50 16 G1" 50
LE300E LA300E 45 DN125 12.0 0.3 2198 2088
LD450W 45 4200 350 R410A DN100 FL 7 0.15 380/3/50 16 G1" 63.3
LE350E LA350E 55 DN125 15.0 0.3 2389 2270
LD500W 50 5433 350 R410A DN100 FL 7 0.15 380/3/50 16 G1" 75
LE400E LA400E 65 DN125 17.0 0.3 2470 2347
LD600W 60 7871 550 R410A DN150 FL 7 0.16 380/3/50 16 G1" 83.3 LE500E LA500E 75 DN150 18.0 0.3 2650 2518
LD750W 75 8769 600 R410A DN150 FL 7 0.16 380/3/50 16 G1" 108.3 LE600E LA600E 85 DN150 27.0 0.5 3480 3306
LE750E LA750E 110 DN150 36.0 0.5 4605 4375
EXCELLENT PERFORMANCE
EXCELLENT QUALITY
www.liutech.com.cn
Company introduction
Reliable manufacturing
market.
Thus, Liuzhou Tech Machinery Co., Ltd. is responsible for all the
portable compressor business of the LIUTECH brand, while
Efficient performance
Liuzhou Tech Machinery Equipment Co., Ltd. and its branches
are in charge of the sales and service of the stationary Atlas Copco original high-efficiency air end, more
compressor of the LIUTECH brand. energy-saving than similar products
Enlarged cooling area, resistant to high temperature
LIUTECH has always been adhering to the brand promise of "we environment
take care of your compressed air", and constantly develops and
provides customers with energy-efficient compressed air
system solutions, including a full range of oil-injected screw
compressors, water-injected screw compressors, oil-free
scrolls type compressors, refrigerated dryers, Desiccant
Easy maintenance
dryers, air reciever tank , compressad air filters, piping Solution
and energy recovery, as well as various service products.
“Excellent performance, excellent quality” is We have the industry-leading main machine re-
LIUTECH’s quality policy. Following this quality manufacturing center, which can provide high-tech
policy, LIUTECH make sure all products maintain services such as air end repair and air end
high quality. replacement.
In China, we have set up air centers in the capital 天津大修中心
cities of East China, North China, and South
China, and set up offices in more than 30 large
and medium-sized cities across the country. Innovation
Sales and service personnel have undergone One-satop service
rigorous professional training. We always pay Energy efficiency leader
attention to your compressed Air and guarantee
your safe and efficient production!
We care about
your compressed air
Technical specifications
Working pressure Capactiy Motor power
(air flow rate) Noise level Weight
Model Outlet size
bar m /min
3
kW dB(A) kg
LU4-8 8 0.58
4 63 152 G1/2
Reliable air end and motor LU4-10 10 0.51
LU5.5-8 8 0.82
5.5 63 166 G1/2
LU5.5-10 10 0.68
The main machine adopts original Atlas Copco Air end, LU7.5-8 8 1.13
7.5 63 175 G1/2
High stability, long life, low noise LU7.5-10 10 0.90
LU11-7 7 1.79
All high-efficiency motors have a protection class LU11-8 8 1.78
above IP54 and H-class insulation 11 65 293 G1
LU11-10 10 1.36
LU11-13 13 1.19
LU15-7 7 2.25
Suitable to harsh conditions LU15-8 8 2.24
15 66 341 G1
LU15-10 10 2.00
LU15-13 13 1.54
The compressor is equipped with a pre-filter to LU18-7 7 3.04
improve its operating conditions LU18-8 8 3.01
Provides the option of heavy-duty nano air filter to 18.5 68 364 G1
LU18-10 10 2.57
increase the dust holding capacity of the air filter
Calculation according to the worst environmental LU18-13 13 2.10
standards of the national industrial zone, LU22 G-7 7 3.65
The filter area is increased by 30% to reduce the LU22 G-8 8 3.48 436
intake noise 22 68 G1
LU22 G-10 10 2.99
LU22-13 13 2.35 364
LU30 G-7 7 5.36
LU30 G-8 8 5.00 30 70 559 G1 1/2
LU30 G-10 10 4.45
Smart controller
Air end
Motor and intake valve
Atlas Copco original , with advanced SAP design, SKF heavy-duty bearings, and the
best screw linear speed and compression efficiency, which are more than 5% energy
High-efficiency and energy-saving Atlas Copco vacuum
saving than similar products on the market
inlet valve (patent)
2
Professional customized AIRLOGIC T controller
4.3 inches full color touch screen, can display in Chinese and English
Screw machine professional control logic
Temperature monitoring: compressor head exhaust
Pressure monitoring: machine units exhaust IE2 high efficiency motor
Timekeeping function: running time Full series come standard with IE2 high efficiency motor
The icon reminds the operation, shutdown or maintenance status IE3 ultra-efficient motor optional, more energy-saving,
Optional, 6 sets combined control is available more power-saving
Built-in ICONS, interconnection system Motor protection class: IP55
Motor insulation class: F
Remote understanding of operating status/parameters
Automatic maintenance reminder/alarm/fault reminder Power density
37kw 45kw 55kw 75kw 90kw
Reduce the cost of equipment inspection and reduce the risk of failure
cm
Professional charts can be generated
c146
Flow rate
Combined control
It can control 2-6 compressors, reduce system pressure and Pre-filter protection
energy consumption.
It can also reduce the leakage of compressed air and maintain
the stability of the pressure of the entire pipe network The compressor is equipped with a pre-filter, which
effectively prevents foreign matter from entering the
machine, keeps the machine clean, prolongs the
service life of the filter, and reduces equipment
operating costs
Working Capactiy (air flow rate) Motor power Noise level Working
pressure Weight Capactiy (air flow rate) Motor power Noise level Weight
Model Outlet size Model pressure
Outlet size
bar m3 /min kW dB(A) kg bar dB(A) kg
m3 /min kW
LU90W-8G 8 17.08
LU55-8G 8 10.06
55 72 1220 G2 90 73 1620 G1 1/2
LU90W-10G 10 15.28
LU55-10G 10 9.17
LU90W-13G 13 12.52
LU55-13G 13 7.88
LU75-7G 7 13.68
LU75-8G 8 13.09
75 73 1285 G2
Variable speed type compressor
LU75-10G 10 11.85
Working Capactiy (air flow rate) Motor power Noise level Weight
3
The air end is the heart component of the screw compressor, and its performance
directly affects the service life and cost of the whole machine
The world's NO.1 brand Atlas Copco original main machine, with advanced SAP
design and SKF heavy-duty bearings, minimize the impact and vibration of the
machine, and effectively extend the life of moving parts
It has the best screw linear speed and compression efficiency, which saves more
than 5% of energy than similar products on the market
Air end design: SAP 4:6 teeth
The material of the moving parts is excellent and the machining accuracy is high.
The whole machine has low vibration and low noise
c146
4.3 inches full color touch screen, can display Built-in ICONS, interconnection system
Working Capactiy(air flow rate) Motor power Noise level Weight in Chinese and English Remote understanding of operating status
pressure Outlet size /parameters
Model Screw compressor professional control logic Automatic maintenance reminder/alarm/fault
bar
3
m /min kW dB(A) kg Temperature monitoring: air end exhaust reminder
Reduce the cost of equipment inspection and
Pressure monitoring: compressor exhaust reduce the risk of failure
LU30-7GP 7 5.97
Timekeeping function: running time Professional charts can be generated
LU30-13GP 13 4.23
LU37-7GP 7 7.28
LU37-8GP 8 6.77
37 67 850 G1 1/2
LU37-10GP 10 6.13
Linkage control
LU37-13GP 13 5.15
It can control 2-16 compressors, reduce system pressure
LU45-7GP 7 8.49 and reduce energy consumption. It can also reduce the
leakage of compressed air, maintain the stability of the
8.45 pressure of the entire pipeline network.
LU45-8GP 8
45 67 910 G1 1/2
LU45-10GP 10 7.86
LU45-13GP 13 6.24
LU55-7GP 7 11.17
LU55-8GP 8 10.45
55 68 1460 G2
LU55-10GP 10 9.22
LU55-13GP 13 7.91
LU75-7GP 7 14.95
LU75-8GP 8 14.15
75 69 1535 G2
LU75-10GP 10 12.67
Water cooling type compressor
LU75-13GP 13 10.65
LU75W-13GP 13 10.65
2
Dedicated for variable speed compressor Professional customized AIRLOGIC T controller
Effective isolation between high temperature area and Innovative cooling process, subverting traditional motor
low temperature area cooling and lubrication methods,
Effectively enhance the cooling effect lubricating oil cooling can better protect the motor from high
temperature damage, insulation life is extended by more
Avoid inverter fault at high temperature
than 50%
Minimize fan noise
Motor bearings will never have the risk of poor lubrication,
more than 2 times longer bearing life
The motor is completely maintenance-free, no need to clean or Professional charts can be generated
to add grease
Independently designed according to European standards, high 100% utilization of the cooling area of the cooler
reliability Minimize fan noise
IP5X protection level, fully enclosed and dust proof
Whole aluminum shell + radiating fins, good cooling effect
Switching frequency 12kHz, adjustment speed is 200% faster
than ordinary frequency conversion
The maximum flow adjustment range can reach 88%, with super
adjustment ability
Built-in EMC filter to eliminate harmonic interference
Flow chart
Unique external air filter pad, air filter specially designed for heavy
duty, keep the inside of the machine clean,
Extend the maintenance cycle, easy to disassemble and clean
Air receiver tank
Air compressor Refrigerated air dryer
Motor power Working Capactiy (air flow rate) Noise level Weight
Model pressure 3
Outlet size
Motor power Working Capactiy (air flow rate)
Noise level Weight bar min max dB(A) kg
Model pressure 3
Outlet size
kW
standard ISO2151: 2004, ISO9614/2; tolerance 3dB(A) The noise level is measured at a distance of 1m, according to the
standard ISO2151: 2004, ISO9614/2; tolerance 3dB(A)
Absolute intake pressure: 1 bar, intake temperature: 20°C
Absolute intake pressure: 1 bar, intake temperature: 20°C