Professional Documents
Culture Documents
WE 2300 Series
WS 2300 Series
Walkie Stackers
WE/WS 2300
Series
C WE 2300 Series Walkie Stackers
7.5"
34 17 27"
38
47.3"
BRAKE 42"
21
BRAKE
OVERRIDE
DRIVE
18
23
20
BRAKE
19
28.7%
1.2" 3.5" 10.5%
1.4" 24 27
31
6.6" 7
32
WE 2300 Series Specifications
41 Lift Speed w/wo Load fpm (m/s) 31 / 51 (.16 / .26) 28 / 43 (.14 / .22)
42 Lowering Speed w/wo Load fpm (m/s) 71 / 43 (.36 / .22) 71 / 43 (.36 / .22)
43 Gradeability w/wo Load, 30 min Rating % 3/9 3/8
44 Maximum Gradeability w/wo Load, 5 min Rating % 9 / 17 8 / 17
45 Service Brake Electric
46 Maximum Battery Box LxWxH in (mm) 8.5 x 32.5 x 24.7 (216 x 827 x 627)
Battery
* Subtract 32" (810 mm) from free lift; add 32" (810 mm) to extended height if optional 47.3" (1202 mm) high load backrest is required.
** Up to 110" (2800 mm), 2910 lb up to 130" (3300 mm)
English conversions are approximations. Metric conversions should be done to find true values.
WE 2300 Series Technical Information
Standard Equipment Fault Monitoring System: Drive Unit/Brake Depending on conditions and
1. Four-point suspension with Through a fault flash code Heavy-duty gear box with operator experience, maximum
centrally located handle signaled by an LED, 17 helical spur input gear for low travel speed can be reduced
2. Traction speed control detectable faults can be noise emission. Drive unit is via the rabbit/turtle switch.
(MOSFET) recognized. Using an optional equipped with an electro- Exclusive brake override allows
hand set, faults can be displayed magnetic brake, spring applied, slow speed travel with the
3. Variable traction speed digitally. Controller settings are electrically released. The brake handle near vertical. This feature
forward and reverse programmable. Functional is activated by the control improves maneuverability in
4. One-speed lift, two-speed tests of components are also handle position. tight areas.
lower possible. Incorporates storage
5. Electric brake register for fault history that can Frame/Pivoting Carriage Battery
be interrogated by service Frame and Articulated Truck Removable side panels and top
6. Brake override personnel. Suspension system (ATS) are hinged cover allow easy access
7. Key switch 2. Heavy-duty drive and lift of a rugged design ensuring to battery, as well as battery
8. Horn motors provide high reliability minimum deflections during change in three directions,
and efficiency. operation. Modular pivoting either side or top lift out.
9. Compound drive and lift carriage design ensures excellent Compartment rollers are fitted
motor 3. Electric panel with swing-out traction, optimum truck stability as an option.
10. Emergency power feature, allows good acces- and minimum steering effort in
disconnect sibility and serviceability to all load conditions. Easy service- Other Options
the distribution panel and all ability of all components in 1. Audible travel alarm
11. Battery connector SB-175 other electrical components. power unit and simple adjust- 2. Flashing lights
12. Reversing button 4. Emergency disconnect is ment to compensate for tire
13. Hour meter easily accessible from all wear is possible. Single swing- Safety considerations and
operating positions. out door design allows easy dangers associated with audible
14. Vulkollan tires
access to all components. travel alarms and flashing lights
15. 27" x 42" fork configuration 5. Solid-state switching ensures include:
high component reliability.
Mast • Multiple alarms and/or lights
Optional Equipment 6. Control and power circuits High visibility two- and three- can cause confusion.
1. Pivoting tandem load are fused. Distribution panel stage mast design features
wheels 3.2" x 2.3" and controller are short- nested I-beams and canted • Workers ignore the alarms
(WE 2300-25 only) circuit protected. rollers. Lift cylinders are posi- and/or lights after day-in and
2. Battery compartment rollers 7. All wiring is color coded. tioned in outer I-beam profile for day-out exposure.
3. Battery discharge indicator best visibility through mast and • Operator may transfer the
with low battery lift interrupt Hydraulic System clear view onto fork tips during responsibility for “looking out”
and hour meter 1. Heavy-duty compound load handling. Standard to the pedestrians.
motor and gear pump equipment includes full-free lift
4. Freezer corrosion conditioning, • Annoys operators and
selected for optimum lift for two- and three-stage mast.
continuous -30° C / -22° F, pedestrians.
performance and low noise. Mast cushioning between
intermittent - 40° C / - 40° F stages ensures smooth Dimensions and performance
2. Control block houses
5. Load backrest proportional pressure operation. Heavy-duty mast data given may vary due to
6. Maintenance-free battery compensated flow control and chain rollers are sealed manufacturing tolerances.
pack valve, check valve, relief and lubricated for life. Easy Performance is based on an
valve and direction control access to carriage rollers. average size vehicle and is
Electrical System valve to select lower affected by weight, condition of
24-volt electrical system function. The proportional Operator Controls truck, how it is equipped and
incorporating: valve ensures smooth load The robust X10™ control the conditions of the operating
1. Transistor “MOSFET” handling. Single speed lift handle is designed to allow for area. Crown products and
controller, microprocessor and two speed lowering is an optimum turning radius with specifications are subject to
controlled with on-board available to the operator. low steer effort. All control change without notice.
service diagnostic capability. buttons can be operated with
3. Cylinder rods are hard-plated either hand and can be
This transistor controller chrome with polyurethane
provides many benefits accessed with minimum hand
seals. and wrist movement. The horn
such as maximum energy
efficiency, reduced 4. Relief valve tuned to capacity buttons are integrated in the
maintenance and infinite protects all components in hand grips. An ergonomic
speed control capability. the hydraulic system. forward/reverse thumb wheel
allows for precise maneuvering.
C WS 2300 Series Walkie Stackers
34 30 30 35 33 17 34
38
47.3"
BRAKE
28
BRAKE
OVERRIDE
21
DRIVE
18
23
20
BRAKE
19
1.4"
24 27
31
6.6" 7
39
32
WS 2300 Series Specifications
40 Travel Speed w/wo Load mph (km/h) 3.3 / 3.7 (5.3 / 6.0)
41 Lift Speed w/wo Load fpm (m/s) 26 / 43 (.13 / .22)
42 Lowering Speed w/wo Load fpm (m/s) 71 / 39 (.36 / .20)
43 Gradeability w/wo Load, 30 min Rating % 2/8
44 Maximum Gradeability w/wo Load, 5 min Rating % 7 / 17
45 Service Brake Electric
46 Maximum Battery Box LxWxH in (mm) 8.5 x 32.5 x 24.7 (216 x 827 x 627)
Battery
English conversions are approximations. Metric conversion should be done to find true values.
WS 2300 Series Technical Information
You can count on Crown to build lift trucks Because Crown is continually improving its products,
specifications are subject to change without notice.
designed for safe operation, but that’s
only part of the safety equation. Crown Crown, the Crown logo, the color beige, the
Momentum symbol and The X10 Handle are
encourages safe operating practices through trademarks of Crown Equipment Corporation.
ongoing operator training, safety-focused
Copyright 2004-2007 Crown Equipment Corporation
supervision, maintenance and a safe working SF14404 Rev. 5/07
Printed in U.S.A.
environment. Go to crown.com and view our
safety section to learn more.