Professional Documents
Culture Documents
I-110RS
Ø1000mm x 1000mm
Power Size:
(Ø40” x 40”)
Net Engine 244kW @ 2000rpm
Power: (300HP)
Portability: Tracked
Operating 46000Kgs *
Weight: 101413lbs*
*Note: Without one by-pass
and magnet options
I-110RS
Specifications
Specifications - I-110RS
Undercarriage
Bolt on tracks
500mm (20”)shoe Remote Control (Option)
Hydraulic grease tensioning Full function radio remote unit
3780mm (12’ 5”) Sprocket centres Machine can be switched from crushing mode into track mode, moved and be
Single tracking speed switched back to operating mode from remote control unit.
Umbilical Control unit (Supplied standard)
Transfer conveyors Offers track control only
Topdeck side transfer belt -500mm (20”) Belt
Bottom deck side transfer belt -500mm (20”) Belt Platforms
Top deck side transfer belt discharges directly onto the recirculating conveyor.
Bottom deck side transfer belt can be fed directly onto to the recirculating Maintenance / access platforms are provided for all key areas around impact
conveyor, or an optional plant mounted stockpile conveyor (removable for chamber, drive system and powerunit. The catwalks are accessible from the left
transport) hand side and feature double handrails, self-closing access gates and access
ladders. All catwalks are galvanised
Recirculation System
On board doubledeck screen- (Bottom deck supplied open as standard)
Fines collection conveyor
Screening Unit
3660mm x 1520mm (12’ x 5’) Top deck
3050mm x 1520mm (10’ x 5’) Bottom deck
Hydraulic drive
Common parts to 683 Screener
Fines Conveyor
1400mm (55”) Belt
Discharge height 3200m (10’ 6”)
Hydraulically folding for transport
20
R
I-110RS
Specifications - I-110RS
Engine: -Radio remote System: Operational controls of machine (auto start/stop) & track
Caterpillar C9 Acert Watercooled Diesel Engine 223kW (300HP)
movement
Chamber: -Hydraulically folding hopper extensions- total capacity 9m³ (10.4yd³)
KH Mineral APP1010GA Impact chamber 1000mm x 1000mm (40’ x 40’)
-Overband magnet on main conveyor, c/w stainless steel skirting and discharge
Hydrostatic drive and advanced electronic control system
chute
-By-pass conveyor- 2m discharge height, 650mm belt width
Hopper/Feeder: -Extended by-pass conveyor, 2.9m discharge height, 650mm belt width
5m³ Hopper (6.5yd³) -Manual gantry for assisting blow bar change
Heavy duty vibrating feeder (VGF) with integral pre-sceen -Optional Grizzly bar spacing, 25mm, 75mm, 100mm (please specify)
Grizzly Bar spacing 40mm as standard -Belt weigher
Mesh aperture on grizzly feeder: 30mm -Special paint (if different from Finlay Orange RAL2002)
-Hydraulically driven water pump
-Grinding Path (3rd Apron in Crushing Chamber)
Main Conveyor: -4 Rotor impact rotor
Undercrusher vibratory plate feeder with wear resistant liners -Bottom deck meshes & fitting parts for screen
Skirting on main conveyor -Lighting Mast
High specification scraper at main conveyor head drum -Cold Climate lubrication kit
-Hot climate lubrication kit
Re-Circ system:
-Hot climate cooler pack
12’ x 5’ double deck screen- supplied with 50mm top dk mesh,
-Mid grade chutes to transfer mid grade to opposite side
no bottom deck or fitting parts supplied
Fines conveyor-1400mm belt- hydraulically folding for transport -Additional de-mountable stockpiling conveyor for mid grade screen product
Transfer conveyors- Top deck and bottom deck transfer belt discharge onto (Note - Separate transport required)
recirculation conveyor as standard
Recirculation conveyor- 500mm (20”) feeding back to main hopper
General:
Separate central operator's panel
Dust suppression
Galvanised catwalk c/w handrail, kickboard and access ladders
Control operation of tracks with 5m connection lead
Single speed tracking with soft start
Heavy Duty undercarriage c/w Tracks- 3780mm (12’ 5”)
Sprocket centres with 500mm (20") shoe
Guards to ‘M&Q’ Specification
Low level greasing
Emergency stops (6 Nr)
21
R
I-110RS
Dimensions
3.1m (10’2”)
16m (52’7”)
Working Position
Note: Illustrated with optional magnet and extended by-pass conveyor options
6.3m (20’8”)
4.2m (14’)
22