Professional Documents
Culture Documents
Spill-free to ensure
operator safety
old water, water glycol,
c -n
o discharge and no work place
hot water, steam, contamination,
mineral or synthetic heat -p
rotection for tools and
transfer oil, production.
lubricating oil,
gas circuits: argon,
nitrogen, helium, etc.
Pollution-preventing
flat faces to guarantee
the integrity of fluids
and gases
- no pollution enters your circuits.
2
…. ensures seal integrity
Compact design
Especially suitable for difficult
access situations.
Sealing by sealing-kit KES ring
possible on all cylindrical BSP
thread sockets (see pages 7, 8
Efficiency and 11).
Maximum flow in the smallest 3D-files available on request.
size.
Possibility of plug
installation in to
recessed pocket
(see p. 6).
3
Technical data
Shut-off double
Sealing Construction
Seals: Standard version: brass and stainless steel.
Nitrile (NBR) BF option: all the parts in the fluid stream are in
Fluorocarbon (FPM) stainless steel. See part-numbers tables.
Ethylene-Propylene (EPDM) *
Socket dust cap: aluminium and Chloroprene (CR)
Perfluoroelastomer (FFKM) in the fluid stream
Plug dust cap: Chloroprene (CR)
Other seal materials available on request.
* Important !
Never use Ethylene-Propylene seals with fluids of mineral
origin (oil, fat etc…).
Working temperatures
Without dust cap
4
Hydraulic flow rate / pressure drop charts
Speed of flow between 5 and 10 m/s: CBI 03 CBI 06 CBI 09 CBI 12 CBI 16 CBI 25
- Nitrile and Fluorocarbon seals 5 2 8.5 19 34 60.5 147
- temperatures ≤ 60 °C 10 4 17 38 68 121 294
CBI 03 to CBI 09
Pressure drop (bar)
Flow (l/min)
Test conditions:
- Fluid: water
- Direction of flow:
plug socket
Flow (l/min)
5
Pneumatic flow rate / pressure drop charts
Pressure drop (bar)
Test conditions:
- Inlet pressure:
6 bar
- Direction of flow:
plug socket
Flow (Nm3/h)
Dimensions
CBI 06: Ø = 24 mm
L = 30 mm
CBI 09: Ø = 36 mm
L = 43 mm
Machining drawings
for recessed installation
available on request
6
Part-numbers
Sockets
Dimensions (mm) Part-numbers
Designation Model Thread
Ø D1 Ø D2 L1 L2 L3 L4 H/flats Standard BF option
M 16 x 1,5
24° cone 59 11 20 CBI 06.1416/IA
for tube Ø 10 mm
7
Part-numbers
Sockets
Dimensions (mm) Part-numbers
Thread or
Designation Model
int. Ø ØD L1 L2 L3 L4 H/flats Standard
M 16 x 1,5
24° cone 22 56.5 11 24 48 22 CBI 06.1416/IA/RE
for tube Ø 10 mm
90° for self-locking hose CBI 06 Ø 3/8” 56.5 23.5 56 48 19 CBI 06.1810/IA/CN/RE
8
Dimensions (mm) Part-numbers
Designation Model Thread
L1 L2 L3 H/flats Standard BF option
BSP male thread CBI 03 G 1/8 39.5 8 13 CBI 03.7150/IA CBI 03.7150/IA/BF
with 60° cone and integrated sealing
G 1/4 54 10 17 CBI 06.7151/IA CBI 06.7151/IA/BF
CBI 06
G 3/8 53.5 11 21 CBI 06.7152/IA
9
Part-numbers
Plugs
Dimensions (mm) Part-numbers
Designation Model Thread H1/ H2/ Panel Max. panel
L1 L2 Standard BF option
flats flats drilling Ø thickness
Panel mount, CBI 03 G 1/8 46 8 13 15 12.5 4.5 CBI 03.5150/IA CBI 03.5150/IA/BF
BSP male thread with 60° cone
CBI 06 G 1/4 60.5 11 17 21 16.5 4 CBI 06.5151/IA CBI 06.5151/IA/BF
NPT
CBI 25 98.5 22,5 55 CBI 25.7256/IA
1 1/4
10
Sealing Protective dust caps
Fluorcarbon (FPM), Ethylene-Propylene (EPDM) and (To be separately ordered)
Perfluoroelastomer (FFKM) seals are available on all Available for all the models.
models.
Add the corresponding code to the socket and plug Socket dust cap Plug dust cap
part-numbers: part-numbers: part-numbers:
JV: Fluorocarbon seals CBI xx.8500 CBI xx.8550
JE: Ethylene-Propylene seals
JKV: Perfluoroelastomer seals
in the fluid stream
Ex.: CBI 09.1102/IA/JV
KES sealing-kits
KES are to be separately
All fluids ordered.
11
For contact details: www.staubli.com/connectors/contacts
Stäubli units
Agents