Professional Documents
Culture Documents
When using electrical appliances, basic safety precautions should always be followed,
including the following:
NOTE: ALSO BE SURE TO READ THE WARNINGS AND CAUTIONS THAT ARE
PROVIDED BEFORE EACH ATTACHMENT’S OPERATING INSTRUCTION.
Bosch Universal Series Kitchen Before Using for the First Time
Machine Before using any of the attachments for the
The Bosch Universal Series Kitchen first time it is recommended they be washed,
Machine is available in 3 models: rinsed well and dried. Of the attachments
supplied with the systems in this manual,
• The MUM 6610 UC all parts, except the whisk holder for the
twin beating whisks and the blender’s
comprised of the electronic power unit
blade/base assembly, are dishwasher safe:
with integral cord storage, six-quart
capacity mixing bowl, splash ring and > The whisk holder should be hand
cover (MUZ 6 KR3), twin beating whisks, washed in warm soapy water, rinsed
dough hook and motor drive cover. and dried.
> The blender’s blade/base assembly
• The MUM 6622 UC should be washed under running water
comprised of the electronic power unit and dried.
with integral cord storage, six-quart
capacity mixing bowl, splash ring and Note: It is recommended that the
cover (MUZ 6 KR3), twin beating whisks, blender’s blade/base assembly
dough hook, six-cup capacity blender never be left to stand in water or
(MUZ 6 MX2) and motor drive cover. soap solution, to prevent the bearing
lubricant from being washed out.
• The MUM 6630 UC
comprised of the electronic power unit Getting to Know Your Bosch Kitchen
with integral cord storage, six-quart Machine
The Bosch Universal Series Kitchen
capacity mixing bowl, splash ring and
Machines are comprised of various
cover (MUZ 6 KR3), stainless steel
attachments, depending on the system
mixing bowl (MUZ 6 ER1), twin beating purchased (see above). In addition to the
whisks, dough hook, slicer/shredder attachments listed on the previous pages
(MUZ 6 RR2) with universal beater (MUZ that are available with the standard systems,
6 RG3) and motor drive cover. Bosch offers many special accessories.
4
MUM 6610 UC
MUM 6622 UC
MUM 6630 UC
Figure 1
5
Special Accessories Electronic speed control
Five-position rotary switch (figure 2a) is
To allow you to get the most service from located at the front of the power unit: 3
your Bosch Universal Series Kitchen speeds plus a momentary pulse function
Machine, Bosch engineers have designed and a stop position “O/Off,” see figure 2a.
a line of special accessories to expand the
usefulness of your machine. In addition to Built-in Safety Cutout
the attachments that come with the various The Universal Series Kitchen Machines are
Universal Series Kitchen Machines, there provided with a built-in safety cutout switch
are optional accessories that can be ordered (figure 2b) to protect the motor against
separately. These accessories include a overheating.
food and meat grinder, grain mills and citrus
juicer, plus additional attachments that can If the safety cutout trips:
be used with the meat grinder: fancy cookie a. Turn the machine to the off position
attachment, fruit pulper, pasta-making disks “O/Off” and unplug.
and grater attachment. See SPECIAL b. Wait a few minutes to allow the motor
to cool.
ACCESSORIES, at the back of this
c. Depress the manual reset button.
booklet, page 28. Or, to view all currently
You will find the reset button on the
available accessories, visit our Web site at
bottom of the machine, see figure
2b.
www.boschsmallappliances.com
After allowing the machine to cool and
Our work on expanding the usefulness of
resetting the safety cutout switch, the
the Bosch Kitchen Machine is a continuing
machine is again ready for use. The motor
process. If there is some type of accessory
should then start when plugged in and turned
in which you are interested in, that is not to one of its 3 speeds or when turned on
included at the back of the book, please and placed in momentary contact position.
either write us at:
Dual drives
• Bosch Small Appliances The Universal Series Kitchen Machines
Customer Support come with two drives:
BSH Home Appliances 1. A high-speed drive directly coupled to
5551 McFadden Avenue the motor, used to drive the blender, food
Huntington Beach, CA 92649 processor and other special
accessories.
or call us at: 2. A high-torque drive used to drive the
stirring/beating whisks, dough hook,
• 1 (866) 44BOSCH meat grinder and other special
[1 (866) 442-6724] accessories.
Figure 2.
7
1. Place power unit on suitable work rotary switch at the front of the power
surface. unit. See figure 2a. The rotary switch
Before using the machine with any of has five positions:
the attachments, the power unit should
be placed on a suitable work surface. a. “M,” a momentary “pulse” position
The surface should be sturdy, smooth that provides full speed and power
and clean; make sure that there is no for the time it is held in position.
flour or oil on the surface. A clean,
b. “O/Off,” the off position.
smooth surface will provide the best
footing for the suction cup feet on c. Four speeds labeled 1, 2 and 3.
the power unit and will limit slipping Speed 1 is the lowest speed. The
and/or “walking.” speed increases with each
succeeding step up to the highest
2. Plug power unit into power supply. speed, speed 3.
Unwind the power unit’s cord to
appropriate length and plug it into All models of the Bosch Universal
a convenient nearby receptacle. Series Kitchen Machines incorporate
a built-in safety cutout switch to
3. Remove motor drive cover. protect the motor against overheating.
If necessary, remove motor drive cover If the safety becomes activated, the
from drive that will be used and place power unit will stop. If power unit
it on drive that will not be used. The should stop even though there is power
cover, when placed on the high-speed to the unit see TROUBLESHOOTING
drive, can be locked in position by at the back of this manual .
pressing down and turning
counterclockwise, see figure 2c. 6. Turn power unit off.
When your work with the attachment
4. Select attachment to be used. is completed or the capacity of the
Select the attachment you wish to use batch-feed attachment has been
and place on power unit. See specific reached, turn the power unit to the Off
instructions for attachment selected. position, “O/Off,” and unplug.
Specific instructions are located on
pages listed below: 7. Remove the attachment.
Remove the attachment from the
Attachment Pages power unit, per instructions for the
Mixing bowl w/dough hook ........ 9–11 specific attachment being used.
Mixing bowl w/twin whisks ....... 11–14
Blender ..................................... 14–17 8. Continue use.
Slicer/shredder ......................... 17–21 If the attachment was of the batch-feed
Stainless steel bowl ................. 22–23
type and you wish to continue using
the attachment, empty the bowl or jar
Table 1.
of the attachment per its specific
5. Operate unit with rotary switch. instructions and reinstall the
Once the attachment is in place, the attachment as before. Repeat steps
speed of its moving components can 5 through 7 as often as necessary to
be controlled through the use of the complete work.
8
9. Work completed, STANDARD ATTACHMENTS
remove attachment. Following are the specific instructions for
If the attachment is of the continuous the standard attachments provided with the
feed type or is the batch type and you Bosch Universal Series Kitchen Machines
have completed the work you wished covered by this manual.
to perform with the attachment,
remove the attachment from the power Mixing Bowl with Twin Beating Whisks
unit per the instructions for the specific and Dough Hook
attachment being used. (MUZ 6 KR3)
Figure 3.
Table 1. Examples of operation using whisk assembly and dough hook. Speed 1 should
be used for initial stirring and combining. Place all ingredients into the mixing bowl, liquids
first. Shortening must be soft (room temperature).
12
2. If you have not already done so, move The splash ring and cover should be in
the motor drive cover to the high-speed place whenever the power unit is in
drive. Place the mixing bowl on the drive operation. The splash ring and cover
of the power unit and turn the bowl serve to prevent the escape of flour
counterclockwise with a slight dust at the beginning of the stirring and
downward pressure until bowl is firmly kneading process, and also serves to
seated, see figure 4a. prevent accidental contact with the
moving whisks.
CAUTION
Failure to make sure that the bowl is Placing into Operation w/Twin Beating
properly seated on the drive coupling before Whisks
the power unit is turned on can result in Make sure that the switch is in the off
damage to the bowl and/or coupling. position, “O/Off.” Unwind the electrical cord
to the necessary length and plug into the
wall outlet. The bowl with whisk assembly
3. Place and engage the twin beating is now ready for operation. See table 1 for
whisk assembly on the driveshaft of the examples demonstrating the use of the twin
mixing bowl as shown in figure 6. beating whisks.
Figure 7.
CAUTION
Blade/base assembly is very sharp.
Handle with care.
Wash the blade/base assembly under 3. If you have not already done so, move
running water. Do not place the blade/ the motor drive cover to the high-speed
base assembly in the dishwasher or drive. Place the blender on the high-
allow it to stand in water. This will tend torque drive of the power unit and turn
to wash out the lubricant. After the blender counterclockwise with a
cleaning, rinse thoroughly and dry slight downward pressure until the jar
before using. is firmly seated, see figure 11.
15
Example of Use of Blender
To familiarize you with the operation of the
blender, a sample recipe for mayonnaise is
provided below:
Mayonnaise Recipe
1 whole egg
1/3 cup of vegetable oil
2 tablespoons lemon juice or light
vinegar
1 teaspoon sugar
1/2 teaspoon dry mustard
1/2 teaspoon of salt
2/3 cup of vegetable oil
Slicer/shredder tips:
21
Stainless Steel Bowl with Dough Hook drive pin with gasket be washed. All
(MUZ 6 ER1) components of the mixing bowl and the
dough hook are dishwasher safe. Or
WARNING they may be washed in warm soapy
water. After washing, rinse well and dry
1. There is a risk of injury from rotating before using.
tools when using the mixing bowl with
the dough hook.
2. Avoid contact with moving parts. Keep
hands, hair and clothing, as well as
spatulas, bowl scrapers and other
utensils away from dough hook and
during operation to prevent injury and/
or damage to the power unit or
accessories.
3. Always work with the bowl lid and
splash ring fitted in place.
4. Do not change tools until the power unit
has come to a complete stop; when
switched Off, the power unit will continue
to turn for a brief period.
Use of stainless steel bowl with dough hook 20c. Dough hook
Before beginning to attach this or any other
attachment, make sure that the power unit 20d. Stainless steel bowl
is on a smooth, clean, suitable work
surface and switched to the Off position, 20e. Drive pin w/gasket
“O/Off,” and that you have, if necessary,
moved the motor drive cover to the drive 2. If you have not already done so, move
that will not be used. the motor drive cover to the high-speed
drive. Place the stainless bowl on the
1. Before using the mixing bowl and drive of the power unit and turn the bowl
dough hook for the first time, it counterclockwise with a slight
is recommended that the bowl, downward pressure until bowl is firmly
cover, splash ring, dough hook and seated. See figure 21a.
22
Placing into Operation w/Dough Hook
CAUTION Make sure that the power unit is on a
Failure to make sure that the bowl is smooth, clean, suitable work surface and
properly seated on the drive coupling before switched to the Off position, “O/Off.” Unwind
the power unit is turned On can result in the electrical cord to the necessary length
damage to the bowl and/or coupling.
and plug into a convenient outlet. The mixing
bowl with dough hook is now ready for
operation. See table 1 for examples
demonstrating the use of the dough hook
attachment. Sample recipes may also be
found in the recipe section, at the back of
this manual.
Removing Contents
Figure 21. Before beginning to remove the contents
from the stainless steel bowl, make sure
3. Engage the dough hook on the
that the power unit has been turned to the
drive pin by placing it in bowl, as shown
in figure 21b, and turning the dough Off position, “O/Off.” Remove the cover and
hook clockwise while pushing down until splash ring by turning clockwise and lifting
it stops. off. Once the cover and splash ring have
been removed, the dough hook may be
removed by turning the hook clockwise
while lifting.
The Bosch Universal Series Kitchen Machines require no special care other than the care
and cleaning noted in this manual. If you are having a problem with your machine, before
calling our Customer Support group, please refer to the TROUBLESHOOTING section
below. If, after reviewing the troubleshooting section and trying its remedies, you are still
having a problem, please do contact us by either writing to us at:
or e-mailing us at:
• boschsmallappliances@bshg.com
or calling us at:
• 1 (866) 44BOSCH
[1 (866) 442-6724]
If you do write to us, please include your e-mail address or a daytime telephone number
where you may be reached.
Also, to view our full product line, please visit our Web site:
• www.boschsmallappliances.com
24
TROUBLESHOOTING
Power 1.The motor has become > Turn the power unit to the Off
unit hums blocked; that is, the position, “O/Off,” and unplug.
but attachment being used has > Remove the attachment
nothing is become jammed. that was in use and correct
moving whatever the situation is that
is causing the blockage.
> Reinstall the attachment and
resume use per attachments
instructions.
25
Sample Recipes
26
Oatmeal-Chocolate Chip Cookies
Acknowledgments:
The sample recipes listed above were sub-
mitted by:
27
SPECIAL ACCESSORIES
28
Important Notes
29
Important Notes
30
BOSCH Small Appliance Warranty
BSH Home Appliances (“BOSCH”) warrants all new small appliances to be free from original
defects in design, materials and workmanship for one (1) year after the sale to the original
owner.
Within the stated warranty period, BOSCH will repair or replace, at its sole option, any
small appliance or parts thereof which prove defective under the conditions of normal use
and service at no charge to you. It is the owner’s responsibility to return the appliance for
repair. Repaired and replacement small appliances and parts shall be the same or as
close in appearance as possible to the original for the purposes of this warranty.
Should you require service of your BOSCH small appliance, please contact customer
service at 1-866-44-BOSCH. Repair of BOSCH appliances should only be performed by
qualified technicians.
This warranty is limited to the original consumer purchase and is not transferable. Specifically
excluded from this warranty are failures caused by accident, misuse, neglect, abuse,
including tampering, use of frequency or voltage other than marked on the product, and
use for commercial purposes.
To the extent allowed by law, this warranty sets out your exclusive remedies, whether for
negligence or otherwise. BOSCH will not be liable for any consequential or incidental
damages, losses or expenses. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESSED
WARRANTIES. ANY WARRANTY IMPLIED BY LAW, WHETHER FOR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE,
SHALL BE EFFECTIVE ONLY FOR THE PERIOD THAT THIS EXPRESSED WARRANTY
IS EFFECTIVE. BOSCH DOES NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES.
No attempt to alter, modify or amend this warranty shall be effective unless authorized in
writing by an officer of BOSCH. Some states do not allow limitations on how long implied
warranties last or the exclusion or limitation of incidental or consequential damages, so
the foregoing limitations and exclusions may not apply to you. This warranty gives you
specific legal rights and you may also have other rights which vary from state to state.
31
Looking for more information about BOSCH products?
www.boschsmallappliances.com
32