Professional Documents
Culture Documents
Description
The manual lever release actuator provides a manual
means of CV-98 CO2 agent cylinder actuation by direct Component Material Approvals
manual actuation of its pull lever or cable actuation when All Manual Brass with FMRC Approved
used in conjunction with a remote manual pull station. Cable-pull Stainless UL Listed
Manual actuation is accomplished by pulling the actuator Actuators Steel Pin (EX-2968)
hand lever. The lever design contains a forged mechanical
detent which secures the lever in the open position when These lever actuators can also be attached to the top of a
actuated. CV-98 electric actuator.
Cable-pull actuation is accomplished by using a remote Each type actuator has its Part No. stamped on the lever.
manual pull station. The remote manual pull station system
must contain the components necessary to meet the actua-
tor lever traveling requirements of 7 in. (17.8 cm).
Shipping Assembly
Part No. Description
423309 Manual cable-pull actuator (handle and pin; for local control)
423310 Manual cable-pull actuator (handle, no pin; for remote control)
70846 Manual cable-pull actuator (for HF Actuator)
HANDLE
3 7/8 IN.*
3 7/8 IN.*
(9.8 cm)
(9.8 cm)
PIN
3 7/8 IN.
3 7/8 IN.
(9.8 cm)
(9.8 cm) 000897 002553
1 1/8 – 18 1 1/8 – 18
THREAD THREAD
1-8.1
HANDLE
3 7/8 IN.*
(9.8 cm)
001420
3 7/8 IN.
(9.8 cm)
1 1/8 – 18
THREAD
Part No. 423310
* Add 1 9/16 in. (3.9 cm) to height when handle is in the straight up position.
TYCO SAFETY PRODUCTS, MARINETTE, WI 54143-2542 715-735-7411 Form No. F-9882-2 © 2005 Ansul Incorporated