This document lists the characteristics and specifications for an activated carbon product. It includes measurements for surface area, particle density, mean particle diameter, adsorption capacity, abrasion number, ash content, particle length, bulk density, and acceptable value ranges for each characteristic. The product comes in needle/cylindrical or granular forms and is specified to have a minimum surface area, density, adsorption capacity, and bulk density while keeping the ash content, abrasion number, and particle dimensions within defined ranges.
This document lists the characteristics and specifications for an activated carbon product. It includes measurements for surface area, particle density, mean particle diameter, adsorption capacity, abrasion number, ash content, particle length, bulk density, and acceptable value ranges for each characteristic. The product comes in needle/cylindrical or granular forms and is specified to have a minimum surface area, density, adsorption capacity, and bulk density while keeping the ash content, abrasion number, and particle dimensions within defined ranges.
This document lists the characteristics and specifications for an activated carbon product. It includes measurements for surface area, particle density, mean particle diameter, adsorption capacity, abrasion number, ash content, particle length, bulk density, and acceptable value ranges for each characteristic. The product comes in needle/cylindrical or granular forms and is specified to have a minimum surface area, density, adsorption capacity, and bulk density while keeping the ash content, abrasion number, and particle dimensions within defined ranges.
Particle density, wetted in water g/cc Mean particle diameter (i) In case of needle / cylindrical type mm (ii) In case of granular type mm Adsorption capacity in terms of iodine number, Min mg/g Abrasion Number (by ASTM method), Min. Ash content, Max % by mass Mean particle length (i) In case of needle / cylindrical type mm (ii) In case of granular type mesh Bulk Density, min Kg/m3 Spec 850 1.3 – 1.4