Professional Documents
Culture Documents
Introduction 5
Accessories 16
ACO Self Euroline
■■ Basic elements from polymer concrete ■■ Smooth surface for rapid water flow ■■ Screwless locking grids
■■ Frost resistant and self-cleaning capabilities ■■ Sf groove for 100% sealed channel
■■ High strength at low weight ■■ V-profile ■■ Travel by private cars
■■ Free access to the trough for easy
cleaning
V profile and SF groove for 100% sealed Channels with outlet DN 110 in bottom Sump unit including sludge backet (PP)
channel can be equipped foul air trap can be added foul air trap
with coarse dirt strainer
4 4 4
5 1
5 3 8 6
1. Channel body 1,0 (or 0,5m) 4. Channel grating (chose from 6. End cap with outlet DN 110
2. Channel body 1,0 with outlet DN 110 wide range of gratings) 7. Channel odor seal
3. Channel body with outlet DN 110 5. End cap 8. Pipe outlet DN 110
5
ACO Self Euroline
1 Introduction
ACO Self Euroline
1 Gratings overview
Galvanised slotted grating Stainless steel slotted grating Galvanised slotted grating – ANTHRACITE
electrolytically polished
Galvanised slotted grating – TERAKOTA Cast iron slotted grating Plastic slotted grating with Microgrip
6
ACO Self Euroline
Product information
■■ Construction products (CE)
ACO product benefits
■■ For cars in private area
■■ Channel body made of
polymer
■■ Clear width 100 mm
■■ With V-profile
■■ Optionally available with galvanised, cast
■■ Easy access for cleaning
iron or plastic grating
■■ Screwless locking grid
■■ SF groove for safety watertight
installation
Order information
Dimensions
Weight Item
Length Width Height PU
[kg] number
[mm] [mm] [mm]
Channel
1000 118 100 8,2 60 38700
500 118 100 4,2 60 38702
Channel with outlet in bottom part DN 110
1000 118 100 8,3 60 38701
Sump unit (including sludge basket)
500 118 303 11,3 12 38703
Order information
Dimensions
Weight
Length Width Height PU Item number
[kg]
[mm] [mm] [mm]
Channel
1000 118 100 8,3 60 409972
500 118 100 4,3 60 409974
Channel with outlet in bottom part DN 110
1000 118 100 8,5 60 409973
Sump unit (including sludge basket)
500 118 303 11,3 12 409975
7
ACO Self Euroline
1 Channels with gratings
Line drainage system ACO Self Euroline with gratings
Order information
Dimensions
Weight Item
Length Width Height PU
[kg] number
[mm] [mm] [mm]
Channel
1000 118 104 11,8 60 38705
500 118 104 6,0 60 38707
Channel with outlet in bottom part DN 110
1000 118 104 12,5 60 38706
Sump unit (including sludge basket)
500 118 305 13,0 12 38708
ACO Self Euroline – with plastic grating with non slip finish Microgrip
Order information
Dimensions
Weight
Length Width Height PU Item number
[kg]
[mm] [mm] [mm]
Channel
1000 118 100 7,6 60 416324
500 118 100 4,6 60 416326
Channel with outlet in bottom part DN 110
1000 118 100 7,7 60 416325
Sump unit (including sludge basket)
500 118 303 10,7 12 416327
8
ACO Self Euroline
Order information
Dimensions
Weight
Length Width Height PU Item number
[kg]
[mm] [mm] [mm]
Channel
1000 118 175 10,3 30 406674
Channel with knock-out in bottom part DN 110, inspection
1000 118 175 11,3 30 406675
ACO Self Euroline – with stainless steel Linear triangle bar grating (Heelsafe)
Order information
Dimensions
Weight
Length Width Height PU Item number
[kg]
[mm] [mm] [mm]
Channel
1000 118 100 10 60 38710
1000 118 100 5,1 60 38712
Channel with outlet in bottom part DN 110
1000 118 100 10 12 38711
Sump unit (including sludge basket)
1000 118 303 12 12 38713
9
ACO Self Euroline
1 Channel bodies and sump unit
Line drainage system ACO Self Euroline – without gratings
Product information
■■ Light vehicle traffic
ACO product benefits
■■ Clear width of 100 mm
■■ Channel body made of polymer
concrete
■■ To 16 variant drainage channels
■■ Free access for easy cleaning
Order information
Dimensions
Weight
Length Width Height PU Item number
[kg]
[mm] [mm] [mm]
Self Euroline channel
10
ACO Self Euroline
Weight
Description Suitable for PU Item number
[kg]
0,6 42 38505
11
ACO Self Euroline
1 Gratings for channel bodies
Line drainage system ACO Self Euroline – gratings overview
Product information
12
ACO Self Euroline
Brickslot
Gratings for channel bodies 1
Brickslot 1
Product information
■■ Slot height 40 mm
Order information
Product information
■■ Slot height 65 mm
Order information
13
ACO Self Euroline
1 Gratings for channel bodies
Brickslot
1 Product information
■■ Slot height 105 mm
Order information
Accessories
Weight Item
Description Suitable for PU
[kg] number
14
ACO Self Euroline 55
Product information
■■ Construction products (CE)
ACO product benefits
■■ For cars in private area
■■ Channel body made of
polymer
■■ Clear width of 100 mm
concrete
■■ Supplied with galvanised grid or
■■ Free access for easy cleaning
separately with a choice any grid
■■ Screwless locking grid
■■ SF groove for watertight installation
Order information
Dimensions
Weight Item
Length Width Height Type PU
[kg] number
[mm] [mm] [mm]
Euroline 55 channel without grating
1000 118 55 Channel 5.0 60 810000
Channel with outlet
1000 118 55 4,8 60 810010
DN 110
1000 118 55 Channel with knock out 5.0 60 810020
1000 118 55 Channel only without logo 5 60 413141
Euroline 55 with galvanised slotted grating
1000 118 57 Channel 6,3 60 416922
Channel with outlet
1000 118 57 6,4 60 416923
DN 110
1000 118 57 Channel with knock out 6,3 60 413608
Channel with knock out
1000 118 57 6,3 60 413142
without logo
Euroline 55 with anthracite slotted grating
1000 118 57 Channel 6,3 60 416924
Channel with outlet
1000 118 57 6,4 60 416925
DN 110
1000 118 57 Channel with knock out 6,3 60 413609
Euroline 55 with cast iron slotted grating
1000 118 60 Channel 9 60 416926
Channel with outlet
1000 118 60 9,1 60 416927
DN 110
1000 118 60 Channel with knock out 9 60 413196
Euroline 55 with Linear triangle bar grating (Heelsafe)
1000 118 57 Channel 8,15 60 416928
Channel with outlet
1000 118 57 8,25 60 416929
DN 110
1000 118 57 Channel with knock out 8,15 60 413197
Euroline 55 Brickslot h=40 mm
1000 118 108 Channel 8,3 60 416918
Channel Brickslot
1000 118 108 8,5 60 416919
inspection
15
ACO Self Euroline 55
1 Accessories
Line drainage system ACO Self Euroline 55
1 Accessories
Weight Item
Description Suitable for PU
[kg] number
16
2 ACO Self Vario mats
Base Vario 18
Product information
2 ■■ Long life thanks to the materials
ACO product benefits
■■ Timeless design
■■ Versatile combination of system
■■ For outdoor use
components
■■ Of polymer concrete
■■ Suitable for indoor and outdoor areas
■■ Edge protection made of galvanised
■■ Easy installation with customized
steel
height
■■ With the spigot DN 110
■■ Individual design options
Order information
Dimensions
Weight Item
Length Width Height PU
[kg] number
[mm] [mm] [mm]
Vario – polymer concrete base
600 400 80 11,4 20 00398
750 500 80 16,6 20 00399
1000 500 80 22,7 10 00400
18
ACO Self Vario mats
Product information
■■ Actual size of the grids is 10 mm 2
smaller than said dimension
■■ Frames and mats are embedded
■■ For vario base and frames
■■ Mats are suitable for indoor and covered
outdoor spaces
Order information
Galvanised steel
750 × 500 20 6,0 20 01208
mesh grid
Anthracite carpet
750 × 500 20 4,6 4 01211
and aluminium mat
19
3 ACO Point drainage
Product information
Product Load class Aplikace Courtyard and street inlets are a perfect
drainage solution for areas, where the
ACO Self Garden gully ■■ A 15 ■■ Residential developments
terrain requires point drainage.
■■ Pedestrian zone
Thanks to a range of materials, hydraulic
ACO GALA ■■ B 125 ■■ Platforms capacity and flow velocity this system
point drainage ■■ Pedestrian areas, car parking provides a solution for a wide variety 3
According to EN 124 of application.
Possibility to assemble
it as sediment trap roof
ACO Gala inlet with the Pointlock locking removal. The grating can only be opened
system and B 125 load class was using grating lifting tool. It is ideal for
designed for outdoor areas. The product application at schools, platforms and
has high standards of both, manufacture other areas with high level of foot trafic.
and design, which enables simple
instalation. The bar-less locking device
Pointlock avoids unwanted grating
Point drain with cast-iron grating and frame Extension for increase total building height Leveling part for adjusting building height
21
ACO Point drainage
3 Drains with grates and accessories
ACO Self Garden gully
Product information
■■ In a private area of mobile car
ACO product benefits
■■ With two types of grids
■■ Sump unit made from
■■ With outlet DN 110
polymerconcrete
■■ Drainage area of approx. 150 m²
■■ With integrated. Removable odor seal
■■ Flow rate through inlet 4 l/s
3 ■■ Including sludge basket
■■ In combination with the extension
can be used as a sediment trap
for roof drainage DN 100
Order information
Dimensions
Weight Item
Length Width Height Grating PU
[kg] number
[mm] [mm] [mm]
250 250 350 Galvanised steel 14,0 24 01581
250 250 360 Cast iron 19,0 24 01552
Accessories
Weight Item
Description Suitable for PU
[kg] number
Extension
■■ Body to increase the total height or as
a mount element of roof drainage DN 110 ■■ Self yard drain 5,7 36 02102
■■ Height: 200 mm
22
ACO Point drainage
Product information
■■ According to en 124
ACO product benefits
■■ Load class a15-b125
■■ Pointlock bar-less locking device
■■ With integrated seal for watertight
connection to the base line DN 110
■■ With a frame made of
ductile cast iron
3
■■ With integrated removable odour trap
■■ Including sludge basket (pp)
Order information
Dimensions
Weight Item
Length Width Height Grating PU
[kg] number
[mm] [mm] [mm]
Galvanised steel
300 300 440 (mesh grating 27,3 12 10501
MW 31×17)
Accessories
Weight Item
Description Suitable for PU
[kg] number
23
4 ACO Drain N 100
Introduction 25
Channel body 27
Accessories 30
Gratings 31
N 100
Product information
Benefits
After removing grating can be channels Proven system tongue and groove A simple design for your house
easily cleaned for precise installation environment
25
N 100
4 Introduction
Drainage system with a wide range of application
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
10.0 20.0
0.0
0.1
0.0 10.1 10.0 20.1 20.0
10.0 20.0
10.0
4 20.0
20.0 0.0
0.1 EK 20.1
EK 10.1
EK EK
10.1 16 17 18 19 20 20.1
EK 0.0 EK 10.0 EK
10.2.2
for vertical pipe connection 20.2.2 Type
EK
0.1 / 5.0 / EK
10.1 / 20.1
EK
EK EK EK
20.2.1
EK EK
0.2.1 10.2.1
EK
EK
EK EK
26
N 100
Product information
■■ According to the EN 1433
ACO product benefits
■■ Clear width 100 mm
■■ Channels with inverted slope of 0,5 %
■■ Load class A15-C 250
in various building heights
■■ Drain without protective edge
■■ Gratings for a wide range of appli-
cation
■■ Grids anchoring screw lock
■■ Channels made from polymer con-
crete
Order information
Channel N100 – 1,0 m, with preformed Channel N100 – 0,5 m, with preformed
knock-out for vertical pipe connection knock-out for vertical pipe connection
Dimensions
Weight Item
Type Length Width Height Start/ PU
[kg] number
[mm] [mm] Finish [mm]
Channels
0.0 130 12,5 30 405121
5.0 155 13,6 30 405123
1000 130
10.0 180 16,6 30 405125
20.0 230 19,5 24 405127
Channels
0.1 130 7,7 12 405122
5.1 155 8,0 12 405124
500 130
10.1 180 8,2 12 405126
20.1 230 10,5 12 405128
1)
xception: cross drainage on heavily loaded roads / rein of railway crossings.
E
For these applications, we recommend ACO Drain Monoblock® RD100 and 300th. 27
Infobox
N 100
4 Channel body
Line drainage system N 100
■■ According to EN 1433
■■ Sloping channels with sloping
invert of 0.5%
■■ Grids anchoring screw lock
■■ Clear width 100 mm
Order information
4 Dimensions
Weight Item
Type Length Width Height Start/ PU
[kg] number
[mm] [mm] Finish [mm]
1 130/135 13,8 30 405101
2 135/140 14,1 30 405102
3 1000 130 140/145 14,5 30 405103
4 145/150 14,9 30 405104
5 1)
150/155 15,8 30 405105
6 155/160 15,6 30 405106
7 160/165 16 30 405107
8 1000 130 165/170 16,4 30 405108
9 170/175 16,8 30 405109
10 1)
175/180 17,2 30 405110
11 180/185 17,5 24 405111
12 185/190 17,9 24 405112
13 190/195 18,3 24 405113
14 195/200 18,6 24 405114
15 1)
200/205 19 24 405115
1000 130
16 205/210 19,4 24 405116
17 210/215 19,8 24 405117
18 215/220 20,2 24 405118
19 220/225 20,6 24 405119
20 1) 225/230 21 24 405120
Note: Channels have preformed knockout for vertical pipe connection DN 110.
28
Infobox
N 100
■■ According to EN 1433
■■ The possibility of a short version (kf)
for type 0-10 or long version (lf) type
0-20 with integrated seal for watertight
connection to the base line including
sludge basket
■■ Bar-less locking device used to anchor
gratings
Order information 4
Sump unit N 100 (LF ) – 0,5, with outlet DN 110 Sump unit N100 (KF) – 0,5 m, with outlet DN 110
Dimensions
Outlet Weight Item
Length Width Height Start/ PU
diameter [kg] number
[mm] [mm] Finish [mm]
Long version (LF) with integrated sealing
500 130 355 110 21,9 10 406807
Short version (LF) with integrated sealing
500 135 565 110 24,4 10 405129
29
N 100
4 Accessories
Line drainage system N 100
Accessories
Weight
Description Suitable for PU Item number
[kg]
30
N 100
Product information
Order information
Dimensions 4
Slot Intake
Weight Item
Material Length Width width area PU
[kg] number
[mm] [mm] [mm] [cm²/m]
Load class A 15
Slotted grating
Perforated grating
31
N 100
4 Gratings
Gratings for channel bodies and sump units
Slot
Product information
Order information
4 Dimensions Inlet
opening Intake
Weight Item
Material Length Width measure- area PU
[kg] number
[mm] [mm] ments [cm²/m]
[mm]
Load class B 125
Brickslot
Galvanised
500 130 10 100 5,2 80 406923
steel
Stainless
500 130 10 100 5,2 80 406926
steel
Galvanised
500 130 10 100 6,7 80 406929
steel
Stainless
500 130 10 100 6,7 80 406932
steel
32
5 ACO Civicline
Civicline CL Introduction 34
Product information
ACO product benefits Typical applications ACO Civicline is a channel drainage system
■■ Commercial developments for light to medium duty traffic applications
■■ Provides an efficient drainage solution
■■ Light industrial units up to load class C 250 according to EN
for light to medium duty traffic
■■ Public landscaping 1433.
applications
■■ Car parking ACO Civicline is manufactured from
■■ Strong and robust channel design
■■ Residental developments polymerconcrete high strength material
■■ Innovative galvanised steel edge rail
and available in two widths - 100 mm and
for improved strength and bonding
150 mm.
■■ Channel design improves flow velocity,
promotes self cleansing The system is CE marked and fully certi-
■■ CE marked and EN 1433: 2002
fied to EN 1433: 2002.
certified
■■ Unique ACO Drainlock grating fixing
improves hydraulic capacity
5 ■■ Extensive choice of Drainlock gratings
■■ Lightweight design is simple and fast
to install
■■ 100% recyclable
To support a wide variety of catchment shallow depth channels. The layout below
depths, hydraulic capacities and illustrates the channels available within the
applications, the system is available in ACO Civicline CL range.
two channel widths, 100 mm and 150 mm
and has a choice of constant depths and
.0 .1 .0
00 00 10
10 10 00
CL CL CL
1
0.1 .0 .1 ap
01 00 00 en
dc
10 15 15 al
CL CL CL on
cti
un
ltif
Mu
75 V 0 V
00 75 10 00
10 00 00 01
CL 10 15 50
CL CL CL
1
34
Civicline CL
CE marked and
fully certified to
EN 1433: 2001
*
*
Sealant groove (SF) V shaped channel bore
for simple watertight improves speed of water and
installation promotes self cleansing
35
Civicline CL 100
5 Channels and accessories
Line drainage system Civicline CL 100
Product information
■■ According to EN 1433
ACO product benefits
■■ Clear width 100 mm
■■ ACO DRAIN sealant groove (SF)
■■ Load class A15 - C250
■■ V cross section
■■ Field of application: vehicular and
■■ Drainlock boltless locking
pedestrian areas
■■ Made from polymerconcrete
■■ Innovative strengthened steel rail
130–180
150–200
133
135
500 100
130–180
150–200
151
Order information
Dimensions
Weight Item
Type Length Width Height Invert depth
[kg] number
[mm] [mm] [mm]
0.0 1) 1000 135 150 130 13,2 413210
0.1 1) 2)
500 135 150 130 7,6 413211
10.0 1) 1000 135 200 180 16,2 413214
10.1 1) 2) 500 135 200 180 9,2 413215
1)
Indicates channels supplied with a preformed Ø 110 mm knockout for vertical outlet.
36 2)
Indicates side knockout for 90° channel connection. Knockout on both sides of the channel.
Infobox
Civicline CL 100
Order information
Dimensions
Weight Item
Type Length Width Height Invert depth
[kg] number
[mm] [mm] [mm]
O75 1000 135 75 55 9,2 413212
O75V 3) 1000 135 75 55 8,85 413213
Order information
Dimensions 5
Weight Item
Type Length Width Height Spigot lenght
[kg] number
[mm] [mm] [mm]
135 75–300 50 0,16 23404
Sump units, relevant end caps and step connector from Multiline V 100 S are applicable for Civicline CL 100 system except shallow
channels.
3)
Indicates channels supplied with a preformed Ø110 mm knockout for vertical outlet.
37
Infobox
Civicline CL 150
5 Channels and accessories
Line drainage system Civicline CL 150
Product information
■■ According to EN 1433
ACO product benefits
■■ Clear width 150 mm
■■ ACO DRAIN sealant groove (SF)
■■ Load class A15 - C250
■■ V cross section
■■ Field of application: vehicular and
■■ Drainlock boltless locking
pedestrian areas
■■ Made from polymerconcrete
■■ Innovative strengthened steel rail
Dimensions
Weight Item
Type Length Width Height Invert depth
[kg] number
[mm] [mm] [mm]
0.0 1) 1000 185 210 185 21,6 413216
0.1 1) 2)
500 185 210 185 12,7 413217
Order information
Dimensions
Weight Item
Type Length Width Height Invert depth
[kg] number
[mm] [mm] [mm]
0100 1000 185 100 75 15,0 413218
0100V 4)
1000 185 100 75 14,2 413219
Order information
Dimensions
Weight Item
Type Length Width Height Spigot lenght
[kg] number
[mm] [mm] [mm]
185 100 to 3100 75 0,3 23159
Sump units and relevant end caps from Multiline V 150 S are applicable for Civicline CL 150 system except shallow channels.
1)
Indicates channels supplied with a preformed Ø 160 mm knockout for vertical outlet.
2)
Indicates side knockout for 90° channel connection. Knockout on both sides of the channel.
38 4)
Indicates channels with cast in TPE triple lipped seals for water tight connection Ø110.
Infobox
6 ACO Multiline
Product information
■■ Channel system in accordance with
ACO product benefits
EN 1433/DIN 19580
■■ With ACO DRAIN® safety seam (SF)
■■ Nominal width 100 mm
■■ With V-profile
■■ Load classes A 15 – E 600 1)
6
Design: Galvanised steel Design: Stainless steel Design: Cast iron
Order information
1)
xception: Transverse drainage on heavily frequented roads. For these applications,
E
40 we recommend ACO DRAIN® Monoblock RD 100/200 V.
Infobox
Multiline V 100 (NW 100 mm)
Order information
Order information
41
Multiline V 100 (NW 100 mm)
6 Channel bodies, sump units and accessories
Design: Galvanised edge protection, stainless steel, cast iron
Order information
Order information
42
Multiline V 100 (NW 100 mm)
Weight
Description Suitable for PU Item number
[kg]
End cap with socket for channel end ■■ Multiline flat channel
(shallow channel) 60 mm, DN/OD 50 0.2 50 12376
■■ Galvanised steel 80 mm, DN/OD 50 0.3 1 12384
■■ Length 4 mm 100 mm, DN/OD 0.3 50 12383
75.
For design: Stainless steel
Universal closing end cap
■■ For channel beginning and end
■■ Made of polymer concrete
■■ With stainless steel edge protection
■■ Length 20 mm ■■ V 100 E 0. – 20. 1.6 15 12485
43
Multiline V 100 (NW 100 mm)
6 Channel bodies, sump units and accessories
Design: Galvanised edge protection, stainless steel, cast iron
Weight
Description Suitable for PU Item number
[kg]
Grating hook
■■ For removing cover gratings
■■ Galvanised steel ■■ Cover gratings 0,3 1 01290
44
Multiline V 100 (NW 100 mm)
Load class A 15
Gratings for channel bodies and sump units 6
Load class A 15
Product information
■■ Gratings according to
EN 1433/DIN 19580
■■ With Drainlock screwless locking
Order information
Longitudinal grating
Perforated grating
45
Multiline V 100 (NW 100 mm)
6 Gratings for channel bodies and sump units
Load class B 125
Product information
■■ Gratings tested to EN 1433/DIN 19580
■■ With Drainlock screwless stop
Order information
Q+ mesh grating
Slotted grating
EN-GJS
500 123 12 371 2.3 200 12676
cast iron
46
Multiline V 100 (NW 100 mm)
Ladder grating
6
Plastic 500 123 8 284 0.8 204 132267
47
Multiline V 100 (NW 100 mm)
6 Gratings for channel bodies and sump units
Load class C 250
Product information
■■ Gratings tested to EN 1433/DIN 19580
■■ With Drainlock screwless stop
Order information
EN-GJS
500 123 12 371 3.2 200 12670
cast iron
EN-GJS
500 123 31 × 12 433 3.5 200 12673
cast iron
EN-GJS
500 123 5 191 3.8 200 12675
cast iron
Perforated grating
48
Multiline V 100 (NW 100 mm)
Mesh grating
49
Multiline V 100 (NW 100 mm)
6 Gratings for channel bodies and sump units
Load class C 250 (Brickslot)
Product information
■■ Brickslot based on EN 1433/DIN 19580 ■■ With guide straps
requirements ■■ With reinforced top edge
■■ With lateral slot ■■ Slot height: 105 mm
Order information
Product information
■■ Brickslot based on EN 1433/DIN 19580 ■■ With guide straps
requirements ■■ With reinforced top edge
■■ With lateral slot ■■ Slot height: 150 mm
Order information
Stainless
500 123 10 100 8.3 60 407050
steel
50
Multiline V 100 (NW 100 mm)
Product information
■■ Gratings tested to EN 1433/DIN 19580
■■ With Drainlock screwless stop
Order information
EN-GJS
500 123 12 371 4.1 200 12671
cast iron
6
EN-GJS
500 123 28 × 12 433 4.5 200 12674
cast iron
Mesh grating
51
Multiline V 100 (NW 100 mm)
6 Gratings for channel bodies and sump units
Load class D 400 (Brickslot)
Product information
■■ Brickslot based on EN 1433/DIN 19580 ■■ With guide straps
requirements ■■ With reinforced top edge
■■ With lateral slot ■■ Slot height: 105 mm
Order information
Galvanised
500 123 10 100 6.4 80 23467
steel
Stainless
500 123 10 100 6.4 80 23477
steel
52
Multiline V 100 (NW 100 mm)
Product information
■■ Brickslot based on EN 1433/DIN 19580 ■■ With guide straps
requirements ■■ With reinforced top edge
■■ With centre slot ■■ Slot height: 150 mm
Order information
Galvanised
500 123 10 100 8.3 60 407053
steel
Stainless
500 123 10 100 8.3 60 407056
steel
53
Multiline V 150 (NW 150 mm)
6 Channel bodies, sump units and accessories
Design: Galvanised edge protection, stainless steel, cast iron
Product information
■■ Channel system in accordance with
ACO product benefits
EN 1433/DIN 19580
■■ With ACO DRAIN® safety seam (SF)
■■ Nominal width 150 mm
■■ With V-profile
■■ Load classes A 15 – E 600 1)
6
Design: Galvanised steel Design: Stainless steel Design: Cast iron
Order information
1)
xception: Transverse drainage on heavily frequented roads. Here, we recommend
E
54 the use of ACO DRAIN® Monoblock RD 100/200 V.
Infobox
Multiline V 150 (NW 150 mm)
Order information
Order information
55
Multiline V 150 (NW 150 mm)
6 Channel bodies, sump units and accessories
Design: Galvanised edge protection, stainless steel, cast iron
Order information
Order information
56
Multiline V 150 (NW 150 mm)
Weight
Description Suitable for PU Item number
[kg]
57
Multiline V 150 (NW 150 mm)
6 Channel bodies, sump units and accessories
Design: Galvanised edge protection, stainless steel, cast iron
Weight
Description Suitable for PU Item number
[kg]
6
End cap for channel end (LLS)
■■ Made of polymer concrete ■■ V 150 G 0. 2.2 6 12986
■■ With integrated lip labyrinth seal (LLS) ■■ V 150 G 5. 2.7 6 12987
DN/OD 160 for horizontal, liquid-tight ■■ V 150 G 10. 2.8 6 12988
pipe connection ■■ V 150 G 15. 3.1 6 12989
■■ With EN-GJS cast iron edge protection ■■ V 150 G 20. 3.5 6 12990
■■ Length 40 mm
Grating hook
■■ For removing cover gratings
■■ Galvanised steel ■■ Cover gratings 0,3 1 01290
58
Multiline V 150 (NW 150 mm)
Product information
■■ Gratings tested to EN 1433/DIN 19580
■■ With Drainlock screwless stop
Order information
59
Multiline V 150 (NW 150 mm)
6 Gratings for channel bodies and sump units
Load class C 250
Product information
■■ Gratings tested to EN 1433/DIN 19580
■■ With Drainlock screwless stop
Order information
EN-GJS
500 173 12 578 5.3 96 13070
cast iron
EN-GJS
6 500 173 29 × 12 595 5.3 96 13073
cast iron
Mesh grating
60
Multiline V 150 (NW 150 mm)
Product information
■■ Brickslot based on EN 1433/DIN 19580 ■■ With lateral slot ■■ With reinforced top edge
requirements ■■ With guide straps ■■ Slot height: 105 mm
Order information
Stainless
500 173 10 100 7.9 80 23182
steel
Product information
■■ Brickslot based on EN 1433/DIN 19580 ■■ With lateral slot ■■ With reinforced top edge
requirements ■■ With guide straps ■■ Slot height: 150 mm
Order information
Stainless
500 173 10 100 9.2 50 407062
steel
61
Multiline V 150 (NW 150 mm)
6 Gratings for channel bodies and sump units
Load class D 400
Product information
■■ Gratings tested to EN 1433/DIN 19580
■■ With Drainlock screwless stop
Order information
EN-GJS
500 173 12 578 7.8 96 13071
cast iron
EN-GJS
6 500 173 25 × 12 514 8.2 96 13074
cast iron
Mesh grating
62
Multiline V 150 (NW 150 mm)
Product information
■■ Brickslot based on EN 1433/DIN 19580 ■■ With centre slot ■■ With reinforced top edge
requirements ■■ With guide straps ■■ Slot height: 105 mm
Order information
Product information
■■ Brickslot based on EN 1433/DIN 19580 ■■ With centre slot ■■ With reinforced top edge
requirements ■■ With guide straps ■■ Slot height: 150 mm
Order information
Galvanised
500 173 10 100 9.2 407065
steel
Stainless
500 173 10 100 9.2 407068
steel
63
Multiline V 150 (NW 150 mm)
6 Gratings for channel bodies and sump units
Load class E 600
Product information
■■ Gratings tested to EN 1433/DIN 19580
■■ With Drainlock screwless stop
Order information
EN-GJS
500 173 12 578 7.8 96 13071
cast iron
EN-GJS
6 500 173 25 × 12 514 8.2 96 13074
cast iron
EN-GJS
500 173 – – 9.0 96 13072
cast iron
64
Multiline V 200 (NW 200 mm)
Product information
■■ Channel system in accordance with
ACO product benefits
EN 1433/DIN 19580
■■ With ACO DRAIN® safety seam (SF)
■■ Nominal width 200 mm
■■ With V-profile
■■ Load classes A 15 – E 600 1)
6
Design: Galvanised steel Design: Stainless steel Design: Cast iron
Order information
1)
xception: Transverse drainage on heavily frequented roads. Here, we recommend
E
the use of ACO DRAIN® Monoblock RD 100/200 V. 65
Infobox
Multiline V 200 (NW 200 mm)
6 Channel bodies, sump units and accessories
Design: Galvanised edge protection, stainless steel, cast iron
Order information
Order information
66
Multiline V 200 (NW 200 mm)
Order information
Order information
67
Multiline V 200 (NW 200 mm)
6 Channel bodies, sump units and accessories
Design: Galvanised edge protection, stainless steel, cast iron
Accessories
Weight
Description Suitable for PU Item number
[kg]
68
Multiline V 200 (NW 200 mm)
6
End cap for channel end (LLS)
■■ Made of polymer concrete ■■ V 200 G 0. 3.4 6 13386
■■ With integrated lip labyrinth seal (LLS) ■■ V 200 G 5. 3.9 6 13387
DN/OD 200 for horizontal, liquid-tight ■■ V 200 G 10. 4.1 6 13388
pipe connection ■■ V 200 G 15. 4.9 6 13389
■■ With EN-GJS cast iron edge protection ■■ V 200 G 20. 5.1 6 13390
■■ Length 40 mm
Grating hook
■■ For removing cover gratings
■■ Galvanised steel ■■ Cover gratings 0,3 1 01290
69
Multiline V 200 (NW 200 mm)
6 Gratings for channel bodies and sump units
Load class B 125
Product information
■■ Gratings tested to EN 1433/DIN 19580
■■ With Drainlock screwless stop
Order information
70
Multiline V 200 (NW 200 mm)
Product information
■■ Slot height: 105 mm
Order information
Galvanised
500 223 10 100 7.9 50 407032
steel
6
Stainless
500 223 10 100 7.9 50 407035
steel
Product information
■■ Slot height: 150 mm
Order information
Galvanised
500 223 10 100 8.6 60 407071
steel
Stainless
500 223 10 100 8.6 60 407074
steel
71
Multiline V 200 (NW 200 mm)
6 Gratings for channel bodies and sump units
Load class C 250
Product information
■■ Gratings tested to EN 1433/DIN 19580
■■ With Drainlock screwless stop
Order information
EN-GJS
500 223 12 740 8.6 90 13470
cast iron
EN-GJS
6 500 223 31 × 14 905 7.5 90 13473
cast iron
Mesh grating
72
Multiline V 200 (NW 200 mm)
Product information
■■ Slot height: 105 mm
Order information
Galvanised
500 223 10 100 8.8 80 407038
steel
6
Stainless
500 223 10 100 8.8 80 407041
steel
Product information
■■ Slot height: 150 mm
Order information
Galvanised
500 223 10 100 10.3 80 407077
steel
Stainless
500 223 10 100 10.3 80 407080
steel
73
Multiline V 200 (NW 200 mm)
6 Gratings for channel bodies and sump units
Load class D 400
Product information
■■ Gratings tested to EN 1433/DIN 19580
■■ With Drainlock screwless stop
Order information
EN-GJS
500 223 12 740 11.9 90 13471
cast iron
EN-GJS
6 500 223 26 × 14 756 11.7 90 13474
cast iron
Mesh grating
74
Multiline V 200 (NW 200 mm)
Product information
■■ Slot height: 105 mm
Order information
Galvanised
500 223 10 100 8.5 80 408997
steel
6
Stainless
500 223 10 100 8.5 80 409000
steel
Product information
■■ Slot height: 150 mm
Order information
Galvanised
500 223 10 100 10.5 60 409003
steel
Stainless
500 223 10 100 10.5 60 409006
steel
75
Multiline V 200 (NW 200 mm)
6 Gratings for channel bodies and sump units
Load class E 600
Product information
■■ Gratings tested to EN 1433/DIN 19580
■■ With Drainlock screwless stop
Order information
EN-GJS
500 223 12 740 11.9 90 13471
cast iron
EN-GJS
6 500 223 26 × 14 756 11.7 90 13474
cast iron
EN-GJS
500 223 – – 12.6 90 13472
cast iron
76
Multiline V 300 (NW 300 mm)
Product information
■■ Channel system in accordance with
ACO product benefits
EN 1433/DIN 19580
■■ With ACO DRAIN® safety seam (SF)
■■ Nominal width 300 mm
■■ With V-profile
■■ Load classes A 15 – E 600 1)
6
Design: Galvanised steel Design: Stainless steel Design: Cast iron
Order information
1)
xception: Transverse drainage on heavily frequented roads. Here, we recommend
E
the use of ACO DRAIN® Monoblock RD 100/200 V. 77
Infobox
Multiline V 300 (NW 300 mm)
6 Channel bodies, sump units and accessories
Design: Galvanised edge protection, stainless steel, cast iron
Order information
Order information
78
Multiline V 300 (NW 300 mm)
Order information
Order information
79
Multiline V 300 (NW 300 mm)
6 Channel bodies, sump units and accessories
Design: Galvanised edge protection, stainless steel, cast iron
Accessories
Weight
Description Suitable for PU Item number
[kg]
80
Multiline V 300 (NW 300 mm)
6
End cap for channel end (LLS)
■■ Made of polymer concrete ■■ V 300 G 0. 9.3 6 13786
■■ With integrated lip labyrinth seal (LLS) ■■ V 300 G 5. 9.8 6 13787
DN/OD 200 for horizontal, liquid-tight ■■ V 300 G 10. 10.3 6 13788
pipe connection ■■ V 300 G 15. 10.9 6 13789
■■ With EN-GJS cast iron edge protection ■■ V 300 G 20. 11.6 6 13790
■■ Length 40 mm
Grating hook
■■ For removing cover gratings
■■ Galvanised steel ■■ Cover gratings 0,3 1 01290
81
Multiline V 300 (NW 300 mm)
6 Gratings for channel bodies and sump units
Load class B 125
Product information
■■ Gratings tested to EN 1433/DIN 19580
■■ With Drainlock screwless stop
Order information
Galvanised
500 338 30 × 10 2032 12.0 40 132006
steel
Stainless
500 338 30 × 10 2032 12.0 100 132016
steel
82
Multiline V 300 (NW 300 mm)
Product information
■■ Gratings tested to EN 1433/DIN 19580
■■ With Drainlock screwless stop
Order information
EN-GJS
500 338 12 1146 17.9 40 13870
cast iron
EN-GJS
500 338 30 × 18 1381 16.3 40 13873
cast iron
Mesh grating
Galvanised
500 338 16 × 22 2139 14.9 40 13819
steel
Stainless
500 338 16 × 22 2139 14.9 15 13849
steel
83
Multiline V 300 (NW 300 mm)
6 Gratings for channel bodies and sump units
Load class D 400
Product information
■■ Gratings tested to EN 1433/DIN 19580
■■ With Drainlock screwless stop
Order information
EN-GJS
500 338 12 1146 24.1 40 13871
cast iron
EN-GJS
500 338 25 × 18 1146 24.6 40 13874
cast iron
Mesh grating
Galvanised
500 338 16 × 22 2139 17.4 40 13821
steel
Stainless
500 338 16 × 22 2139 17.4 15 13851
steel
84
Multiline V 300 (NW 300 mm)
Product information
■■ Gratings tested to EN 1433/DIN 19580
■■ With Drainlock screwless stop
Order information
EN-GJS
500 338 12 1146 24.1 40 13871
cast iron
EN-GJS
500 338 25 × 18 1146 24.6 40 13874
cast iron
EN-GJS
500 338 – – 25.8 40 13872
cast iron
85
7 ACO Monoblock PD
Monoblock PD 100 V
Channel bodies, sump units and accessories 87
(NW 100 mm)
Monoblock PD 150 V
Channel bodies, sump units and accessories 89
(NW 150 mm)
Monoblock PD 200 V
Channel bodies, sump units and accessories 91
(NW 200 mm)
Monoblock PD 100 V (NW 100 mm)
Product information
Order information
Dimensions Intake
Type Weight Item
Length Width Height area PU
[kg] [kg] number
[mm] [mm] [mm] [cm2/m]
1000 150 230 202 PD 100 V 0.0 32.8 20 10832
7
Inspection element, 500 mm
Order information
Dimensions Intake
Type Weight Item
Length Width Height area PU
[kg] [kg] number
[mm] [mm] [mm] [cm2/m]
With DN/OD 110 with pre-formed knock-out With DN/OD 110 with pre-formed knock-out
1000 150 230 202 PD 100 V 0.1 14.0 10 10836
With LLS pipe connection DN/OD 110
1000 150 230 202 PD 100 V 0.2 14.0 10 10835
87
Monoblock PD 100 V (NW 100 mm)
7 Channels, sump units and accessories
Monolithic channel body, natural
Order information
Dimensions Pipe
Intake
Length Width Height connection Weight
area PU Item number
[mm] [mm] [mm] DN/OD [kg]
[cm2/m]
[mm]
With LLS pipe connection
110 31.3 10 10837
500 150 500 371
160 31.5 10 10838
Accessories
Weight Item
Description Suitable for PU
[kg] number
Grating hook
■■ For removing cover gratings ■■ Cover gratings 0.3 1 01290
■■ Galvanised steel
88
Monoblock PD 150 V (NW 150 mm)
Product information
■■ According to EN 1433
ACO product benefits
■■ Clear width 150 mm
■■ Drainage channel in monolitic design ■■ Load class A15 - D400
without any glued joints ■■ Field of application: vehicular and pe-
■■ Made from polymerconcrete destrian areas
Order information
Dimensions Inlet
Type Weight Item
Length Width Height area PU
[mm] [kg] number
[mm] [mm] [mm] [cm2/m]
Order information
Dimensions Inlet
Type Weight Item
Length Width Height area PU
[mm] [kg] number
[mm] [mm] [mm] [cm2/m]
89
Monoblock PD 150 V (NW 150 mm)
7 Channel bodies, sump units and accessories
Monolithic channel body, natural
Product specification
Order information
Dimensions Inlet
Type Weight Item
Length Width Height area PU
[mm] [kg] number
[mm] [mm] [mm] [cm2/m]
Accessories
7 Weight Item
Description Suitable for type PU
[kg] number
Grating hook
■■ For removing cover gratings ■■ Cover gratings 1 1 01290
■■ Galvanised steel
90
Monoblock PD 200 V (NW 200 mm)
Monolithic channel body, natural
Channel bodies, sump units and accessories 7
Monolithic channel body, natural
Product information
Order information
Dimensions Intake
Type Weight Item
Length Width Height area PU
[mm] [kg] number
[mm] [mm] [mm] [cm2/m]
Order information
Dimensions Inlet
Type Weight Item
Length Width Height area PU
[mm] [kg] number
[mm] [mm] [mm] [cm2/m]
91
Monoblock PD 200 V (NW 200 mm)
7 Channel bodies, sump units and accessories
Monolithic channel body, natural
Order information
Dimensions Pipe
Intake
Length Width Height connection Weight Item
area PU
[mm] [mm] [mm] DN/OD [kg] number
[cm2/m]
[mm]
With LLS pipe connection
500 250 645 740 160 48.0 6 10987
500 250 645 740 200 49.0 4 413133
7 Accessories
Weight Item
Description Suitable for type PU
[kg] number
Grating hook
■■ For removing cover gratings ■■ Cover gratings 0.3 1 01290
■■ Galvanised steel
92
8 ACO Monoblock RD
Monoblock RD 100 V
Channel bodies, sump units and accessories 94
(NW 100 mm)
Monoblock RD 150 V
Channel bodies, sump units and accessories 97
(NW 150 mm)
Monoblock RD 200 V
Channel bodies, sump units and accessories 100
(NW 200 mm)
Monoblock RD 100 V (NW 100 mm)
8 Channel bodies, sump units and accessories
Monolithic channel body, natural
Product information
Order information
Dimensions Intake
Type Weight Item
Length Width Height area PU
[mm] [kg] number
[mm] [mm] [mm] [cm2/m]
1)
N 1433 requirements governing the size of inlet openings for load classes A 15 and B 125 prevent the use
E
94 of ACO DRAIN® Monoblock RD in pedestrian precincts.
Infobox
Monoblock RD 100 V (NW 100 mm)
Monolithic channel body, natural
Channel bodies, sump units and accessories 8
Inspection element, 500 mm
Order information
Dimensions
Inlet
Length Width Height Type Weight Item
area PU
[mm] [mm] Start / Finish [mm] [kg] number
[cm2/m]
[mm]
With DN/OD 110 with pre-formed knock-out
500 160 275 380 RD 100 V 0.1 25.3 10 10775
With LLS pipe connection DN/OD 110
500 160 275 380 RD 100 V 0.2 25.8 10 10778
Order information
Dimensions Pipe
Intake
connection Weight Item
Length Width Height area PU
DN/OD [kg] number
[mm] [mm] [mm] [cm2/m]
[mm]
With LLS pipe connection
110 55.0 6 10769
500 160 525 380
160 55.0 6 10772
95
Monoblock RD 100 V (NW 100 mm)
8 Channel bodies, sump units and accessories
Monolithic channel body, natural
Accessories
Weight Item
Description Suitable for type PU
[kg] number
Grating hook
■■ For removing cover gratings ■■ Cover gratings 0.3 1 01290
■■ Galvanised steel
96
Monoblock RD 150 V (NW 150 mm)
Monocast polymer concrete channel, natural
Channel bodies, sump units and accessories 8
Monocast polymer concrete channel, natural
Product information
■■ Made of polymer concrete, natural, with
ACO product benefits
additional sealing with a sealant (SF)
■■ Monocast polymer concrete channel possible
anthracite or natural
■■ V cross-section
■■ Clear width 15.0 cm
■■ Maximum load class D 400 - F 900,
compliant with EN 1433:2005
Order information
Dimensions Inlet
Type Weight Item
Length Width Height area PU
[mm] [kg] number
[mm] [mm] [mm] [cm2/m]
Accessories 8
Weight Item
Description Suitable for type PU
[kg] number
97
Monoblock RD 150 V (NW 150 mm)
8 Channel bodies, sump units and accessories
Monocast polymer concrete channel, natural
Access unit
Order information
Dimensions Inlet
Type Weight Item
Length Width Height area PU
[mm] [kg] number
[mm] [mm] [mm] [cm2/m]
Order information
1)
With side furrows to make angle joints, T-joints and cross-joints.
98 2)
With furrows in the bottom, to make a vertical opening for the ø110 outlet.
Infobox
Monoblock RD 150 V (NW 150 mm)
Monocast polymer concrete channel, natural
Channel bodies, sump units and accessories 8
Sump units
Order information
Dimensions Inlet
Type Weight Item
Length Width Height area PU
[mm] [kg] number
[mm] [mm] [mm] [cm2/m]
Top section
660 210 330 935 48,0 1 130082
0.0
Top section
660 210 430 935 53,0 1 130083
10.0
Top section
660 210 530 935 65,0 1 130084
20.0
Bottom section
500 230 366 – 26,5 1 10935
ø160
Bottom section 8
500 230 365 – 26,5 1 10936
ø200
99
Monoblock RD 200 V (NW 200 mm)
8 Channel bodies, sump units and accessories
Monolithic channel body, natural
Product information
■■ Older versions are fully replaced by this new articles 10908N, 10928N
8
Order information
Dimensions Intake
Type Weight Item
Length Width Height area PU
[mm] [kg] number
[mm] [mm] [mm] [cm2/m]
RD 200 V 0.0
1000 260 330 583 90.0 9 10908N
(1 m)
RD 200 V 20.0
1000 260 530 583 111.0 6 10928N
(1 m)
1)
N 1433 requirements governing the size of inlet openings for load classes A 15 and B 125 prevent the use
E
100 of ACO DRAIN® Monoblock RD in pedestrian precincts.
Infobox
Monoblock RD 200 V (NW 200 mm)
Monolithic channel body, natural
Channel bodies, sump units and accessories 8
Inspection element, 660 mm
Order information
Dimensions
Intake
Height Weight Item
Length Width area Type PU
Start / Finish [kg] number
[mm] [mm] [cm2/m]
[mm]
With DN/OD 160 with pre-formed knock-out
330 935 RD 200 V 0.1 56.2 8 10901
660 260
530 935 RD 200 V 20.1 71.4 4 10921
With LLS pipe connection DN/OD 160
330 935 RD 200 V 0.2 56.2 8 10939
660 260
530 935 RD 200 V 20. 70.4 8 10937
Order information
101
Monoblock RD 200 V (NW 200 mm)
8 Channel bodies, sump units and accessories
Monolithic channel body, natural
Accessories
Weight Item
Description Suitable for PU
[kg] number
Grating hook
■■ For removing cover gratings ■■ Cover gratings 0.3 1 01290
■■ Galvanised steel
102
Monoblock RD 200 V (NW 200 mm)
Monolithic channel body, natural (standard)
Channel bodies, sump units and accessories 8
Inspection element, 660 mm
Order information
Dimensions Intake
Weight Item
Length Width Height area Type PU
[kg] number
[mm] [mm] [mm] [cm2/m]
With DN/OD 160 with pre-formed knock-out
330 RD 200 V 0.1 51.6 4 130016
660 260 935
530 RD 200 V 20.1 67.6 4 130017
With LLS pipe connection DN/OD 160
330 RD 200 V 0.2 51.0 4 130018
660 260 935
530 RD 200 V 20.2 67.0 4 130019
Order information
Dimensions Pipe
Intake
connection Weight Item
Length Width Height area PU
DN/OD [kg] number
[mm] [mm] [mm] [cm2/m]
[mm]
Upper part 0.0
660 260 360 935 – 48.0 4 130022
Upper part 20.0
660 260 560 935 – 65.0 4 130023
Lower part with LLS pipe connection
160 26.5 6 10935
500 230 365 –
200 26.5 6 10936
103
Monoblock RD 200 V (NW 200 mm)
8 Channel bodies, sump units and accessories
Monolithic channel body, natural (standard)
Accessories
Weight Item
Description Suitable for PU
[kg] number
Grating hook
■■ For removing cover gratings ■■ Cover gratings 0.3 1 01290
■■ Galvanised steel
104
ACO Polymer concrete
Technical data
105
Notes
106
ACO Industries k.s.
Havlickova 260
582 22 Pribyslav
Czech Republic
www.aco.com
ACO. The future of drainage
All reasonable care has been taken in compiling the information in this document. All recommendations and suggestions on the use of ACO products are made
without guarantee since the conditions of use are beyond the control of the Company. It is the customer’s responsibility to ensure that each product is fit for
its intended purpose and that the actual conditions of use are suitable. This brochure and any advice is provided free of charge and accordingly on terms that
no liability (including liability for negligence) will attach the Company or its servants or agents arising out of or in connection with or in relation to this brochure
or any such advice. Any goods supplied by the Company will be supplied solely upon its standard conditions of sale, copies of which are available on request.
The Company’s policy of continuous product development and improvement renders specifications liable to modification. information provided in this brochure
is therefore subject to change without prior notification.