This document contains 5 assignment questions about analyzing circuits:
1. Determine the output voltage and current through Rf for two circuits shown in Figure.
2. Determine the output waveform of an ideal differentiator circuit with a triangular input and draw it relative to the input.
3. For a feedback network in Fig. 7.36: (a) Find the feedback factor expression, (b) The frequency where the feedback ratio is real, (c) The opamp configuration that could be used with this network to make an oscillator, and (d) The required voltage gain.
4. Explain the purpose of the tank circuit in an oscillator and write the operating frequency equation.
5. Find an expression
This document contains 5 assignment questions about analyzing circuits:
1. Determine the output voltage and current through Rf for two circuits shown in Figure.
2. Determine the output waveform of an ideal differentiator circuit with a triangular input and draw it relative to the input.
3. For a feedback network in Fig. 7.36: (a) Find the feedback factor expression, (b) The frequency where the feedback ratio is real, (c) The opamp configuration that could be used with this network to make an oscillator, and (d) The required voltage gain.
4. Explain the purpose of the tank circuit in an oscillator and write the operating frequency equation.
5. Find an expression
This document contains 5 assignment questions about analyzing circuits:
1. Determine the output voltage and current through Rf for two circuits shown in Figure.
2. Determine the output waveform of an ideal differentiator circuit with a triangular input and draw it relative to the input.
3. For a feedback network in Fig. 7.36: (a) Find the feedback factor expression, (b) The frequency where the feedback ratio is real, (c) The opamp configuration that could be used with this network to make an oscillator, and (d) The required voltage gain.
4. Explain the purpose of the tank circuit in an oscillator and write the operating frequency equation.
5. Find an expression
1. Determine the output voltage and current through Rf for each circuit shown in the following in Figure.
2. A triangular waveform is applied to the input of the ideal differentiator in Figure 65
as shown. Determine what the output should be, and draw its waveform in relation to the input.
3. Consider the feedback network shown in Fig. 7.36.
(a) Find an expression for the feedback factor, B
(b) At what frequency ω will the network give a real value for the feedback ratio, β? (c) Which opamp amplifier configuration could be used with this network to make an oscillator circuit? (d) What voltage gain would be required for this circuit? 4. Explain the purpose of the tank circuit (L1 and C1) in the following oscillator circuit, and write an equation describing its operating frequency: 5. Consider the following phase shift oscillator circuit.
Find an expression for the frequency of oscillation for the circuit