Professional Documents
Culture Documents
The VLT® Analog I/O Option MCB 109 increases the number of
Voltage [V] Minimum waiting time (minutes)
available inputs and outputs at the frequency converter.
Additionally, it provides a battery back-up for the built-in clock 4 7 15
function in the frequency converter. 200-240 1.1–3.7 kW – 5.5–45 kW
380-480 1.1–7.5 kW – 11–90 kW
Features 525-600 1.1–7.5 kW – 11–90 kW
525-690 – 1.1–.5 kW 11–90 kW
• 3 analog inputs, each configurable as both voltage
High voltage may be present even when the warning LED indicator
and temperature input.
lights are off.
• Connection of 0–10 V analog signals as well as
PT1000 and NI1000 temperature inputs. Table 2.1 Discharge Time, VLT® HVAC Drive FC 102
4 15
200–240 1.1–3.7 kW 5.5–45 kW
380–500 1.1–7.5 kW 11–90 kW
525–600 1.1–7.5 kW 11–90 kW
High voltage may be present even when the warning LED indicator
lights are off.
4 7 15
200–240 0.25–3.7 kW – 5.5–45 kW
380–480 0.37–7.5 kW – 11–90 kW
525–600 0.75–7.5 kW – 11–90 kW
525–690 – 1.1–7.5 kW 11–90 kW
High voltage may be present even when the warning LED indicator
lights are off. 1 LCP
2 Terminal cover
Table 2.3 Discharge Time, VLT® AQUA Drive FC 202
3 Slot B
4 Option
Installation 5 LCP frame
Enclosure Sizes A5, B1, B2, C, D, E, and F Input X42/5. Refer to the programming guide, for
1. Remove the LCP (local control panel) and the LCP further details about programming of analog inputs.
cradle. • To read the analog input values, go to parameter
2. Fit the option card into slot B. group 18-3* Inputs & Outputs.
Configuring
1 LCP The back-up battery typically lasts for 10 years, when the
2 LCP cradle frequency converter is operating at 40 °C ambient
3 Option temperature. If the battery pack back-up fails, replace the
4 Slot B analog I/O option.
Configuration
Analog Inputs
• Voltage input.
Inputs are scalable by parameters for each input.
Configuring
Number of outputs 3
Voltage level at analog output 0–10 V DC
Illustration 5.1 Block Diagram for VLT® Analog I/O Option MCB 109
Resolution 11 bits
Mounted in the Frequency Converter.
Linearity 1% of full scale
Maximum load 1 mA
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on
order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss
and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss A/S
Ulsnaes 1
DK-6300 Graasten
vlt-drives.danfoss.com
*MI38B302*