Professional Documents
Culture Documents
- -
VERSION 1.1
DESIGN BY Nic 'nerdnic' Lechner
BUILD GUIDE www.nerdnic.com
BUILD DIFFICULTY Beginner
PILOT Beginner
CG 7in | 117mm from nose
SPECS
- WINGSPAN 23.4 inches
- LENGTH 19.75 inches
COLOR GUIDE
- BLACK Full cut
- BLUE Crease
- - - - - - - - - -
00 BUILD NOTES
- - - - - - - - - -
Thanks for taking the time to build one of my designs! This one is modeled after P-
51 Mustang and I hope you enjoy it! Follow the build instructions in order and good
luck! Please share a picture of your build with me via email - me@nerdnic.com
These plans are designed to be used with hot melt glue and foam that is 508x762mm
(20x30") and 4-5mm thick:
IDEAL FOAM
All of these foam options weigh about the same and are the best option for this
plane.
- Adams Readi-Board (Dollar Tree)
- ROSS Foam Board
- FliteTest Water Resistant Foam
- - - - - - - - - -
01 FUSELAGE
- - - - - - - - - -
1. Nose weight
The nnChuckStang needs about 10g of nose weight to balance properly. Glue two (2)
USD Nickel into nose of FUSELAGE to achieve proper CG.
- - - - - - - - - -
02 NOSE LEFT/RIGHT
- - - - - - - - - -
Glue NOSE LEFT and NOSE RIGHT on each side of the FUSELAGE
- - - - - - - - - -
03 WING
- - - - - - - - - -
1. Crease WING on center line to allow for dihedral
2. Glue WING in place and use DIHEDRAL GAUGE to set proper degree of dihedral
- - - - - - - - - -
04 HSTAB
- - - - - - - - - -
Glue HSTAB in place