Professional Documents
Culture Documents
108F 英文带蓝牙说明书
108F 英文带蓝牙说明书
3 4
8. APP upgrade: in the power-on state, press the on/off button 5 times in a
row to enter the APP upgrade mode.
Touch PTT PTT
Type-C Charging 9. Indicator light:
Volume+ Power On: blue light on.
Volume- Bluetooth not connected: blue light flashes quickly.
MIC
Power On/Off Bluetooth connected: blue light flashes once every 5 seconds.
Indicator light Bluetooth pairing: red and blue flashing alternately.
On a call: the red light is always on.
Low battery: red light flashes once every 5 seconds.
1. On/Off Button, press and hold for 1 second to turn it on, and then press Power Off: red light flashes 3 times.
and hold for 3 seconds to turn it off.
Charging: red light is always on.
2, + key, volume + Full charger: red light off.
5 6
2. Press (no loose) the PF2 key of the receiver radio,and meanwhile turn
on the radio which will accept data,When see the green light flashingand
CTCSS (50 Numbers)
hear "Beep" 3 times, the radio go into wireless copy receiving mode.
3. Then press (no loose) the PF1 key of and meanwhile turn on the other
radio which is going to transmit data,When see the red light flashing and
hear "Beep" 3 times, the radio go into wireless copy replication mode.
• Press the PTT key of the transmitter, and the red light flashes to
transmit data. Restart the walkie talkie and the radio will automatically
exit the mode.
• The green light of the receiver flashes to indicate that the data is being
received at this time, and the power will restart after the radio receives
the data. Spefications
▲ : Only support the same solution walkie talkie Frequency range UHF 400-470MHz
Output Power 10W
Channel capacity 16
Audio distortion <5%
Frequency stability ±2.5ppm
Maximum frequency deviation ≤5KHz/≤2.5KHz
Module Mode 16KφF3E/11KφF3E
7 8