1) This quick reference guide provides instructions for using a LIFTLOG 1000 forklift weighing system.
2) Key functions include setting a tare weight, selecting auto or manual weight entry, weighing loads, and storing load information in memory.
3) The guide describes the weighing process which involves lifting loads to the start point and pressing buttons to tare, weigh, and store the load information including gross/net weights and totals.
1) This quick reference guide provides instructions for using a LIFTLOG 1000 forklift weighing system.
2) Key functions include setting a tare weight, selecting auto or manual weight entry, weighing loads, and storing load information in memory.
3) The guide describes the weighing process which involves lifting loads to the start point and pressing buttons to tare, weigh, and store the load information including gross/net weights and totals.
1) This quick reference guide provides instructions for using a LIFTLOG 1000 forklift weighing system.
2) Key functions include setting a tare weight, selecting auto or manual weight entry, weighing loads, and storing load information in memory.
3) The guide describes the weighing process which involves lifting loads to the start point and pressing buttons to tare, weigh, and store the load information including gross/net weights and totals.
LIFTLOG 1000 FORKLIFT WEIGHING SYSTEM - QUICK REFERENCE GUIDE
Touch on Load Total to Status Bar
Preset Tare (0 – 49) select Gross/Net display Accumulated Load Total Description / Weight Units Gross/Net ID (Gross / Net) since last cleared Select a Preset Tare Set Zero Weight Load Count Print Load Information Tare current ") load SD Card / USB Memory used Auto/Manual Current Load Weight Weight Entry
Weigh / Enter Weight
(“Auto-Entry” ON) Clear Load Total to zero
Select Memory Store Touch on weight to
(0 – 99) View / Reset Grand Total Power On/Off Enter Weight Switch (“Manual Entry” ON) otherwise no function Return to Main Calibration Load Bar Input a Load SD /USB Delete Last Weight Screen and other Reference Read /Write Entry ("CE-1") settings indicator
Before weighing Weighing Before weighing, you may wish to perform one or more of the following 4 bars “- - - -“ are displayed when not weighing. steps. Lift the load up to the weighing start point and then press . Check Zero Weight If a height reference sensor is installed, the key only appears when the Lift the empty forks up to the weighing start point and press the weighing start point is reached. The indicator will bleep and display . key. If the weight reading is too far away from zero, then press and Press to weigh. The forks will drop slowly for a short time as the follow the screen instruction. weight is measured. Select a Memory Store If ‘AUTO’ weight entry mode is set, the weight is added to the accumulated Load Total and the Load Count will increase by 1. Press and select the store to which you want to add the load total. There are 100 stores (each can be renamed as desired). NOTE: There may be a short delay depending on the “Auto-Add Delay” setting in the Settings menu. Input a Load Reference If ‘MAN’ weight entry mode is set, then press the key, or if fitted, the Press to add a text reference for the load to be lifted. Remote Enter pushbutton switch (optional). Select Auto or Manual Weight Entry Mode Load Bar Press to select the mode. In AUTO mode, the weight is automatically added to the Load Total after 10 – 70% 70 – 90% 90 -100% the countdown period. The key does not function for weight entry. All blocks flash if overloaded (more than 102% of maximum load). In MAN mode, the weight is entered with the key. Delete Last Load Set the tare Press the key to subtract the last weight entry from the Load Total. To calculate net weight of the product, you must first enter the weight of the pallet / container. Either, Reset Load Total to zero (i) Press to select a preset tare weight from the list of 50 presets. Press to reset the Load Total to zero. The load information is saved to the selected memory store along with any text reference entered. The Load Or, Total may also print or save to SD card / USB stick, depending on the (ii) Press and lift the empty pallet / container to the weighing start “Logging Options” settings. The Store setting resets to “Store 0” and text point. Follow the screen instruction. reference to none. Select Gross/Net Display Print Load Totals Touch the Accumulated Load Total to select between Gross weight (red Press to access the Print screen. Press to print the last Load Total readout) and Net weight (black readout). The mode is also indicated in the cleared, or to print the Load Totals for all stores containing load status bar. information.
Chapter - 3 Linear Programming - Problem Formulation and Graphical Method Problem Formulation 1. A Firm Makes Two Types of Furniture - Chairs and Tables. The Contribution For