Professional Documents
Culture Documents
Assignment-6: Connections
For solving the problems, use design formulas and avoid using charts from manual.
3. Design a base plate for axial dead and live loads equal to 120 and 180 kips,
respectively, and moments from the dead and live loads equal to 250 and 400
kip-in., respectively. Bending is about the strong axis for the wide flange
column W12×96 with d = 12.7 in. and bf = 12.2 in. The ratio of the concrete
to base plate area is unity; Fy of the base plate is 36 ksi and fc’ of the concrete
is 4 ksi. Show the final design on neat sketches indicating all the required
detailing.
4. Design a base plate for axial dead and live loads equal to 100 and 200 kips,
respectively, and moments from the dead and live loads equal to 1,200 and
1,600 kip-in., respectively. Bending is about the strong axis for a W14×120
wide flange column. Conservatively, consider the ratio of the concrete to base
plate area is unity; Fy of the base plate is 36 ksi and fc′ of concrete is 4 ksi.
(Follow LRFD). Design the anchor rod requirement also. [Hint: Follow AISC
Guide-1 design examples]. Show the final design on neat sketches indicating
all the required detailing.