Professional Documents
Culture Documents
BENDS OF
CONDUITS
WITH TEACHER KRISTINE
Trade size Metric Designator
3/8 12
1/2 16
3/4 21
1 27
1-1/4 35
1-1/2 41
2 53
Bending our conduits
make our layout more
proper and easy to
inspect.
How bends are made?
Bends shall be made so
that the tubing is not
damaged and internal
diameter of the tubing is
not effectively reduced.
One shot bending shoe
One shot - it can create a
bend of 90 degrees in one
shot.
Number in One Run
There shall be not more
than the equivalent of four
quarter bends (360
degrees total) between
pull points, for example,
conduit bodies and boxes.
Conduit Bend Schematic
Activity
Draw the given conduit
layouts. Add labels on
every bend and compute
the total bend per layout.
(on a crosswise)
1.
2.
3.
4.
Different Types
of Bend
1.90° (L) Stub Up Bend
Most commonly used by
electricians and plumbers which
creates a vertical bend in conduit
that is in an "L" shape.
1.90° (L) Stub Up Bend
Frequently used to run conduit
into electrical boxes, run pipes up
and down walls and to run pipe
into walls through floors and
ceilings.
1.90° (L) Stub Up Bend
2.Back-to-Back Bend