Professional Documents
Culture Documents
Let Us Discover
In repairing and maintaining hardware equipment, it is necessary to have a toolkit that contains
all the necessary tools in different types of jobs. Now, you will learn which tools to use in
preparing a task.
2. Wire Cutter is used for cutting copper, brass, iron, aluminum and steel wires.
7. Soldering Lead is a metal or alloy that is used to join together metal work pieces.
9. Crimping Tool is a tool used to conjoin two pieces of metals by deforming one or
both that causes it to hold together. Always verify the types of wire or cable of a crimper
if it is capable of crimping. And make sure that the stripper has a comfortable grip,
cleanly removes insulation from wires, and keeps the actual wire intact.
10. Wire Stripper is a small hand-held device used to strip the electrical insulation from
electric wires.
12. Anti-static wrist strap is used to safely ground a person working on very sensitive
electronic equipment, to prevent the buildup of electricity on their body, which might
lead to electrostatic discharge (ESD) Equipment. Check properly the overall use,
possible wear, and cleanliness of the wrist strap. Always ground yourself while working
with electronic components.
13. Multi-tester is a tool used to test the integrity of circuits and therefore the quality of
electricity in computer components. Always maintain the functionality and accuracy of
multi tester and LAN tester to ensure the accurateness of measurement of any things
that you measure.
14. LAN Tester is a tool designed to check most network cable wiring.
To ensure that tools and equipment remain in condition and last for a protracted time, store
them properly so it’ll be easy to search out when needed, and are less likely to be lost.
Let Us Try
Directions: Read and understand the questions below and encircle the letter of the correct
answer.
1. What tool is used for cutting copper, brass, iron, aluminum, and steel wires?
a. Wire Stripper b. Crimping tool c. Wire Cutter d. Needle nose pliers
2. What chemical agent is used to supply a clean solder?
a. Soldering Iron b. Soldering Flux c. Soldering Lead d. Soldering Stand
3. Which tool is used for holding, bending, and stretching the lead of electronics components
or connecting wire?
a. Anti-static mat b. Long nose plier c. Crimping tool d. Wire cutter
4. What tool is composed of a heavy-duty metal base and a reinforced spring holder?
a. Soldering Iron b. Soldering Flux c. Soldering Lead d. Soldering Stand
5. Which tool is used to strip the electrical insulation from electric wires?
a. Wire stripper b. Wire Cutter c. Soldering iron d. Flat head screwdriver
6. Which tool is used to test network cable wiring?
a. Part Retriever b. LAN tester c. Multi-tester d. Flat head screwdriver
7. Which tool is used to conjoin two pieces of metal by deforming one or both in a way that
causes them to hold each other?
a. Wire stripper b. LAN tester c. Crimping tool d. Flat head screwdriver
8. What tool is used to test the integrity of circuits and the quality of electricity in computer
components?
a. Crimping tool b. LAN tester c. Anti-static wrist strap d. Multi-tester
9. Which tool is used to join two or more metal conductors with the support of soldering lead
melted around it?
a. Soldering lead b. Philips head screwdriver c. Wire Cutter d. Soldering Iron
10. What tool is used to reach small parts or objects?
a. Flat head screwdriver b. Tweezers c. Philips head screwdriver d. Wire Stripper
_________1. A computer technician can use any tools when repairing computers.
_________4. To prevent tools from damage, it must be properly maintained and keep them
safe and in usable condition.
_________5. Putting in a system for removal and tagging of damaged or defective tools and
equipment.
Let Us Apply
Directions: Explain the statement below. Write your answer on a separate answer
sheet of paper.
Rubrics
TLE Computer System Servicing 7/8 Exploratory Self-Learning Module. Using and
Maintaining Hand Tools. Luvella P. Galez. pp. 1-22