Professional Documents
Culture Documents
Assembly (Cont’d)
3. Set piston rings as shown.
CAUTION:
+ When piston rings are not replaced, make sure that piston
rings are mounted in their original position.
+ Install new piston rings either side up if there is no punch
mark.
SEM522G
SEM160B
CRANKSHAFT NJEM0027S02
1. Install signal plate to crankshaft.
2. Set main bearings in their proper positions on cylinder block
and main bearing cap.
+ Confirm that correct main bearings are selected by using
Method A or Method B. Refer to EM-57.
+ Apply new engine oil to bearing surfaces.
SEM934F
SEM366E
SEM420C
EM-61