Testing supplementary equipotential cennec-
tions (group 1 medical locations)
‘The teot io performed by maliing aure thet the
connections of the protection and equipotential
conductors of the equipotential bonding bus bar
are made correctly and that they are intact.
Purpose of the test: to check the electrical conti-
nuity of the conductors, in other words that there
areno false contacts (without measuring their re-
sistance),
Instrument: ohmmeter with a no-load votage be-
tween 4 and 24 V in AC or DC and that supplies a
current of at least 0.2,
Procedure: the terminals of the instrument are
connected on one
ing bus bar and on the other to the conductive
part or extraneous conductive part, thena check
is made to ensure that the current supplied from
the instrument does not drop below 0.24
ide to the equipotential bond
Measurement for the identification of extrane-
‘ous conductive parts
Purpose of the teat: te asses whether a met
part is an extraneous conductive part by measur-
ing resistance to earth. Its considered to be an
extraneous conductive part if the resistance
value measured is less than 0.5 MA in group 2
medical locations and less than 200 Qin the
‘group 1 medical locations.
Instrument: ohmmeter or appropriate tool
‘equipped witha plug socket to be inserted ina
socket of the system and with a sensor to be
placed in contact with the possible extraneous
‘conductive part.
Procedure: the measurement is taken by connect-
f thei
ing one of the pi rument te the equt
potential bonding bus bar and the other on the
metallic structure in question (fig. 4.8)
arcing usar
By coe
Visual inspection
‘The visual inspection must address the following
aspects in particular:
+ coordination of protection devices in TN and TT
systems;
+ calibration of the protection devices;
+ characteristics of SELV and PELV systems;
+ fire safety devices;
+ circuit configurations for supplying power to
plug sockets in group 2 medical locations:
+ identification of the plug sockets supplied by
safety sources:
+ performance of the sources and devices for
‘safety power supply and lighting.