Professional Documents
Culture Documents
Join Modular
A
Join Modular is a system of connecting planter components designed to be fastened
together, suiting a specific site plan or design. These components are each highly
customizable, with variable dimensions in height and width. The system includes four
primary components that behave modularly to create one larger configuration.
Each Join part is reinforced internally for added strength, contributing to the whole
once each part is fastened together.
Components
A C
Double return top lip provides strength to planter wall and Planter bottom includes laser cut drainage holes
accommodates internal gusseting. and optional anchor points.
B D
Variable angle includes acute angles up to 13 degrees Internal gussets provide strength to the planter
as well as curves. component and anchor points for fastening.
Variable Corner Right Angle Corner
A variable corner component is a central part of the Join A right angle corner component is a central part of the
System, allowing for variable angles that direct a series of Join System, allowing for a 90 degree angle that directs a
Join components in different directions. This component series of Join components in a perpendicular direction. This
is illustrated below as a central part of a system but is component is illustrated below as a central part of a system
also available in acute angles, curves and as a terminating but is also available as a terminating component.
component.
Download Spec Sheet
Download Spec Sheet Specifications Drawing: See page 22
Specifications Drawing: See page 22
Central Component End Component
Allowing for variable angles that direct a series of Join A right angle corner component is can be a central part of
planters. This component is illustrated below as a central the join system, allowing for a 90 degree angle that directs
part of the system but is also available as a terminating a series of Join planters in a perpendicular direction. This
component. component is illustrated below as a central part of a system
but is also available as a terminating component.
Download Spec Sheet
Specifications Drawing: See page 23 Download Spec Sheet
Specifications Drawing: See page 23
B
Join Edging
Components
A C
Double return top lip provides strength to planter wall and Edging bottom includes laser cut anchor holes,
accommodates internal gusseting. optional drainage, kicks, and more.
B D
Variable angle includes acute angles up to 13 degrees A tested internal gusset system provides strength to
as well as curves. the planter component and anchor points for fastening.
Variable Angle Cap
Allowing for variable angles and curves that direct a series A Terminating or continuing cap allows the system to
of Join edging components. This Variable Angle component facilitate a "U" shape in the join system, allowing for a 90
is illustrated below as a central part of the system but is also degree angles that directs a series of Join edging in a
available as a terminating component. perpendicular direction.
Allowing for variable angles that direct a series of Join A central component is designed to add length to a run of
edging. This component is illustrated below as a central edging, providing added strength through internal bracing,
part of the system but is also available as a terminating as well as featuring a seamless connection profile between
component. components. Central components are a popular solution for
straight runs of elevated planted areas.
Download Spec Sheet
Specifications Drawing: See page 25 Download Spec Sheet
Specifications Drawing: See page 25
Join Seating
Join Seating
D
Join Seating was designed to be a modular component of the Join System but also holds
its own as a stand alone seating piece. Minimal, elegant, and classic, this series of benches
feature a simple base and a bench top with wood that is used in both "end to end" and "front
to back" configurations. The Join Seating size options are determined by the custom profiled
timber we use to build them so that proportions remain consistent and thoughtful.
Components
A C
End to end wood configuration runs the length of a bench Join seating connects to edging and modular planters
up to 6', providing a subtle reveal between elements. in a way that integrates elements together as one.
B D
Front to back configuration allows for longer Seating bases are powder coated to match a modular
seamless bench tops. planter program or as a stand alone piece.
Specifications
Le
ng
h t
Va
ria
ble
8”–10”
8”–10” Variable
An g
le V
aria
b le
12-18”
Variable
12-18”
6”
6”
Depth Variable
8”–10”
6”–24”
4”
1” 6”
Length Variable
Depth Variable
10”–14”
Edging Variable Angle Dimensions: Edging Right Angle Dimensions:
JE-VA Variable, Standard Assembly JE-VC Variable, Standard Assembly
Variable
3”–6” Variable
24”–3 6”
Variable
Variable Variable
3”–6”
24”–3 6”
Variable
Variable
3”–6”
Variable 3”–6”
24”–36”
Variable
Variable Variable Variable
8”–10”
8”–10”
24”–3 6”
3”–6”
Variable
Variable
Seating 68.75 End to End Wood Placement Dimensions: Seating 45.75 End to End Wood Placement Dimensions:
JS-EE-6875 L 68.75” W 22.75” H 18” JS-EE-4575 L 47.75” W 22.75” H 18”
22.75” 22.75”
22.75” 22.75”
5.5” 5.5”
68.75” 45.75”
Seating 57.25 End to End Wood Placement Dimensions: Seating 22.75 End to End Wood Placement Dimensions:
JS-EE-5725 L 57.25” W 22.75” H 18” JS-EE-2275 L 22.75” W 22.75” H 18”
22.75” 22.75”
22.75” 22.75”
5.5” 5.5”
57.25” 22.75”
Seating 68.75 Front to Back Wood Placement Dimensions: Seating 45.75 Front to Back Wood Placement Dimensions:
JS-FB-6875 L 68.75” W 22.75” H 18” JS-FB-4575 L 47.75” W 22.75” H 18”
22.75” 22.75”
5.5” 5.5”
22.75” 22.75”
68.75” 45.75”
Seating 57.25 Front to Back Wood Placement Dimensions: Seating 22.75 Front to Back Wood Placement Dimensions:
JS-FB-5725 L 57.25” W 22.75” H 18” JS-FB-2275 L 22.75” W 22.75” H 18”
22.75” 22.75”
5.5” 5.5”
22.75” 22.75”
57.25” 22.75”
About Us
West
804 1515 Broadway St.
Port Coquitlam BC V3C 6M2
Toll Free
1 844 747 9283
greentheorydesign.com/join