Professional Documents
Culture Documents
Department of Education
Region VIII, Eastern Visayas
DIVISION OF BILIRAN
CABUNGAAN ELEMENTARY SCHOOL
TABLE OF SPECIFICATIONS
Third Periodical Test in TLE 6
ITEM PLACEMENT
EASY (70%) AVERAGE (20%) DIFFICULT (10%)
COMPETENCY CODE No. of Items
Remember / Understand/ Apply/ Analyze / Evaluate / Create /
Knowledge Comprehension Application Analysis Synthesize Evaluation
Discuss the importance and methods of enhancing and (TLE6IA-0a-1) 3,4,5,10 11-15 8 1,7,9 2,6 15
decorating bamboo, wood and metal products.
1-15
Demonstrate creative and innovative ways of enhancing and (TLE6IA-0a-2) 16,17,18,19,20,2 24 25 23 22 10
decorating bamboo, wood and metal products. 16-25 1
Conduct simple survey using technology and other data (TLE6IA-0b-3) 26,27,28,32,33,3 31 29,30 35 10
gathering method. 4
26-35
Discuss the effects of innovative finishing materials and (TLE6IA-0c-4) 36,37 38,39 40 5
accessories on the marketability of the products.
36-40
Enhance bamboo, wood, metal and other finished 41,42,43 44 45 5
products through sketching, shading, and outlining, (TLE6IA-0c-5)
41-45
Construct project plan; (TLE6IA-0d-6) 46,47,48,49,50 5
46-50
Name:__________________________________________ Score:_____
Direction: Read the questions very carefully and encircle the letter of your answer.
1. What is the importance of enhancing and decorating finished products?
a. It makes the products more attractive and saleable.
b. Finished products are easy to buy.
c. We can sell finished product.
d. It can be painted.
2. Which one is not considered as the importance of enhancing/decorating finished products?
a. varnished materials c. Profitable
b. More attractive and saleable d. Durable and beautiful
3. ______________ is the art or technique of decorating wood or leather by burning a design on the surface using a
heated metallic point.
a. Engraving c. Painting
b. Pyrography d. Hand carving
4. Using carving knife, gouges and chisels to create designs on the wood is called ______________.
a. Wood Turning c. Embossing
b. Flocking d. Hand Carving
5. What enhancing techniques that lines the interior of drawers and boxes resulted to soft velvety finish?
a. Wood Turning c. Etching
b. Painting d. Flocking
6. The following are reasons to enhance your finished product, except ONE. What is it?
a. It is more saleable. c. It makes the product more expensive.
b. More durable and beautiful d. It is more attractive
7. Why is it important to know the different skills in enhancing and decorating finished products?
a. It develops skills and creativity for livelihood.
b. So that people will admire you.
c. People will not buy your product.
d. To pay more taxes.
8. How can you make your product saleable and beautiful?
a. Use the appropriate methods to enhance the product.
b. Copy the work of other people.
c. Use expensive materials.
d. Use any method.
9. Enhancing the finished product improves one’s _____________ and _________.
a. Pride and honor. c. Orderliness and cleanliness
b. Creativity and workmanship d. Health and profit
10. A process of transferring a design on metal using hardened steel tool called burin or graver to cut into the surface
of the metal?
a. Engraving c. Texturing or Embossing
b. Metal Enhancing Media d. Etching
Directions: Put a check (/) if the statement demonstrates the importance of enhancing and decorating a finished product
and put a cross (x) if it does not.
___11. Many people have the tendency to buy products that are enhanced and decorated.
___12. Improved and ornamented products are durable, strong, and of superior quality.
___13. Enhanced and decorated products tend to be more saleable.
___14. Enhanced and decorated products are less profitable.
___15. There are many methods in enhancing our products.
34. What is the process of enhancing metal products that uses acid to produce corrosive action?
a. staining c. etching
b. engraving d. texturing
35.Which of the following explains the importance of conducting a market survey?
a. Gain customers’ feedback
b. Understand customers’ preference to procure products
c. Assist in making important decisions in enhancing a product
d. All of the above
36. What kind of finishing material is used to fill up cracks and grooves?
a. Stain b. shellac c. fillers d. paint
37. What do we call the ability of the product to be sold?
a. Measurable c. Accessories
b. Marketability d. Product
38. The process of developing a product that will make it more attractive is called:
a. enhancement c. Saleable
b. boosting d. Patronizing
39. What word best describes a product that can withstand extreme weather conditions?
a. Accountability c. Durability
b. Creativity d. Marketability
40. What is the feeling of a customer who receives a product that matches his need?
a. Disappointed c. Angry
b. Sad d. Satisfied
41. What is added to an illustration to make it real or three dimensional?
a. Paint c. drop shadow
b. Light d. cast shadow
42. This is the process of overlaying dark colored paint in your base paint.
a. Shading c. Painting
b. Outlining d. Sketching
43. Tone refers to the _____________________ of color.
a. Smoothness and dullness c. Hue and saturation
b. Darkness and brightness d. Foreground and background
44. In creating an outline using paint, _________ brush should be used.
a. Fine-tip c. Broad-tip
b. Round-tip d. All answers are correct
45. Which of the following sentence states a correct procedure?
a. Apply finishing materials before shading.
b. Start shading from the source of light.
c. Start sketching using s fine-tip brush with paint.
d. Use dark colors in the parts with shade
46. What do you call a document designed to guide you in the execution of a project?
a. Building Plan c. Project Plan
b. Action Plan d. Project Proponent
47. Which part of the project plan contains the quantity of the materials to be used?
a. Working Drawing c. Procedure
b. Tools Needed d. Bill of Materials
48. It shows you the purpose of the plan.
a. Project Proponent c. Objective
b. Procedure d. Materials
49. Scissors, glue gun, pliers and cutter are examples of ____________________.
a. Materials c. Furniture
b. Tools d. Machine
50. The illustration of the structure to be built or made can be found in ____________.
a. Procedure c. Bill of Materials
b. List of Tools d. Working Drawing
Prepared by:
Mrs. Charmaine R. Montes-Inot
Checked:
JUVY C. LICONG
School Head
1 A 26 A
2 B 27 C
3 D 28 B
4 D 29 D
5 C 30 D
6 A 31 B
7 A 32 B
8 B 33 A
9 A 34 C
10 A 35 D
11 / 36 C
12 / 37 B
13 / 38 A
14 X 39 C
15 / 40 D
16 B 41 C
17 D 42 D
18 C 43 D
19 B 44 C
20 A 45 A
21 A 46 C
22 B 47 D
23 B 48 C
24 C 49 B
25 A 50 D