Professional Documents
Culture Documents
Wavistrong Installation Guide - Part18
Wavistrong Installation Guide - Part18
Installation
Guide
Rubber protection pads are placed underneath the Fig. 5.4. Pulled adhesive joint
ratchets before tightening the band clamps. Put a wooden
wedge between the pipe and the pulling lug to create a
gap for mounting of the heating blanket.
For bonding of large diameters 3 to 4 pullers are
required. Check the pullers on defects on a regular base.
5.1.1.4. Others
5.1.2. Consumables
• Measuring tape.
• Pair of scissors.
• Marker.
• Sand paper/grinding discs P40 – P60.
• Brushes.
• Rubber scrappers, bucket.
• Cleaning fluids, joint lubricant.
• Dust masks, gloves and safety glasses.