Professional Documents
Culture Documents
Wavistrong Installation Guide - Part39
Wavistrong Installation Guide - Part39
Installation
Guide
The following safety precautions should be respected When cutting or grinding GRE materials the following
when using GRE products. personal protection is necessary to protect eyes and skin:
The required Risk- and Safety measures when using resin
and hardener for adhesive or lamination sets are shown • A dust mask covering nose and mouth.
under the R- and S- code numbers, which are listed in • A pair of safety goggles.
manufacturers’ documentation (see table 1.1.). • Gloves and overall.
• Overall sleeves which are closed with adhesive
tape to keep the dust out.
12.1. Resin, hardener, adhesive- and • Protective clothing to protect the body.
lamination sets • A well-ventilated room or open air to perform
the machining.
In order to avoid irritation of the respiratory system,
satisfactory ventilation should be provided. If a system is
hydro tested, adequate safety precautions must be taken, 12.3. Environment
as a “safe test pressure” does not exist. Any pressure in
itself is dangerous. Always clean up the work area. GRE and cured adhesive
are chemically inert and do not have to be treated as
Experienced personnel must operate the test equipment. chemical waste.
Persons not involved in the test or inspection are not Waste shall always be disposed in an environment
allowed in the immediate area of the tested system. Only friendly manner.
one person should be in charge and everyone else must
follow his/her instructions.