Professional Documents
Culture Documents
(Deemed to be University)
(Established Under Section 3 of UGC Act, 1956)
Eachanari Post, Coimbatore – 641 021, INDIA
FACULTY OF ENGINEERING
DEPARTMENT OF MECHANICAL ENGINEERING
B.E. DEGREE PRACTICAL EXAMINATION, APRIL 2023
Title of the Subject : Engineering Materials and Metallurgy Laboratory (Arrear)
Subject Code : 20BEME541
Year : III
Semester :V
Date : 11.05.2022 (12:00 pm – 03:00 pm)
QUESTIONS
1. A Study and use of metallurgical microscope with neat sketch.
2. Experiment the Metallographic specimen preparation, mechanical polishing,
mounting, and etching.
3. Experiment the Microstructure of given annealed specimen and tabulate the results.
4. Experiment the Macro etching and sulphur printing for the given specimen and
tabulate the results.
5. Experiment the Electro polishing for the given specimen and tabulate the results.
6. A Comparative study of microstructure of annealed steel (Hypo eutectoid, Eutectoid,
Hyper eutectoid) and variation of hardness with neat sketch.
7. Experiment the Microstructure investigation for the given Cast Iron and tabulate the
results.
8. Experiment the Microstructure of the given eutectic alloys Al-Si, Pb-Sn, and Pb-Sb
specimen and tabulate the results.
9. Experiment the Microstructure of the given wrought and annealed single-phase alpha
brass & Aluminium specimen and tabulate the results.
10. Experiment the Recovery, Recrystallisation and Grain growth of the given cold
worked copper specimen and tabulate the results.
11. Experiment the Galvanostatic polarization & determination of corrosion rate by
Tafel’s Extrapolation for the given specimen and tabulate the results
12. Experiment the Potentiostatic Polarization, passivity & Passivity breakdown study
for the given specimen and tabulate the results.
ALLOCATION OF MARKS
4. Result 10
5. Viva Voce 10
Total 60
1. 20BEME007 BUVANESWARAN.S
2. 20BEME022 YUVARAJA M
3. 20BEME023 MUTHAIYA S
4. 21LBEME001 ABILASH B
7. 21LBEME017 MIETHILEASH T
8. 21LBEME027 RANJITH S