Professional Documents
Culture Documents
Contents
SECTION 1. CHEMICAL PRODUCT & COMPANY IDENTIFICATION: .............................................................................. 2
1.2. Relevant identified uses of the substance or mixture and uses advised against
Supplier
ABB Furse
Wilford Road, Nottingham NG2 1EB. United Kingdom
Tel +44 (0)115 964 3700, Email enquiry@furse.com
Web: www.furse.com
Not classified.
2.1.2. Adverse physicochemical, human health and environmental effects
Not applicable
3.1. Substances
3.2. Mixtures
Not applicable
First-aid measures after inhalation : If breathing is difficult, remove victim to fresh air and keep at rest in a
position comfortable for breathing. Get medical advice/attention if you
feel unwell.
First-aid measures after skin contact : If skin irritation occurs: Wash skin with plenty of water. Obtain medical
attention if irritation persists.
First-aid measures after eye contact : IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing. If eye
irritation persists: Get medical advice/attention.
First-aid measures after ingestion : Do NOT induce vomiting without medical advice. Never give anything
by mouth to an unconscious person. Get medical advice/attention if you
feel unwell.
4.2. Most important symptoms and effects, both acute and delayed
4.3. Indication of any immediate medical attention and special treatment needed
Symptoms may be delayed. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possi-
ble).
Suitable extinguishing media : Extinguishing powder. Carbon dioxide (CO2). For large fire: Water spray.
Alcohol foam.
Unsuitable extinguishing media : Do not use a direct water stream.
Fire hazard : Products of combustion may include and are not limited to: oxides of
carbon. May release hazardous fumes. Smokes
Protection during firefighting : Keep upwind of fire. Wear full fire-fighting turn-out gear (full Bunker gear)
and respiratory protection (SCBA). Cool closed containers exposed to
fire with water spray.
General measures : Use personal protection recommended in Section 8. Isolate the hazard
area and deny entry to unnecessary and unprotected personnel.
6.1.1. For non-emergency personnel
For containment : Contain spill, then place in a suitable container. Minimize dust generation.
Do not flush to sewer or allow to enter waterways. Use appropriate
Personal Protective Equipment (PPE).
Methods for cleaning up : Sweep or shovel spills into appropriate container for disposal. Provide
ventilation.
Precautions for safe handling : Avoid contact with skin and eyes. Avoid breathing dust/fume/gas/mist/
vapours/spray. Do not swallow. Handle and open container with care.
When using do not eat, drink or smoke. Good housekeeping is important
to prevent accumulation of dust. Avoid generating dust. Ensure adequate
ventilation. Never use pressure to empty container.
Hygiene measures : Wash contaminated clothing before reuse. Always wash hands after
handling the product.
Storage conditions : Keep out of the reach of children. Keep container tightly closed. Store
the containers between 5 and 35° C, in a dry and well-ventilated place.
Store in original container. Keep away from heat. Keep away from oxidizing
agents.
Not available.
Appropriate engineering controls : Use ventilation adequate to keep exposures (airborne levels of dust,
fume, vapor, etc.) below recommended exposure limits.
Hand protection : Wear suitable gloves
Eye protection : Safety glasses or goggles are recommended when using product.
Skin and body protection : Wear suitable protective clothing
Respiratory protection : In case of insufficient ventilation, wear suitable respiratory equipment.
Respirator selection must be based on known or anticipated exposure
levels, the hazards of the product and the safe working limits of the selected
respirator.
Environmental exposure controls : Avoid release to the environment.
Other information : Handle in accordance with good industrial hygiene and safety procedures.
Do not eat, drink or smoke when using this product.
10.1. Reactivity
May include and are not limited to: oxides of carbon. May release hazardous fumes. Smokes
Additional information : Based on available data, the classification criteria are not met.
STOT-single exposure : Not classified.
Additional information : Based on available data, the classification criteria are not met.
STOT-repeated exposure : Not classified.
Additional information : Based on available data, the classification criteria are not met.
Aspiration hazard : Not classified.
Additional information : Based on available data, the classification criteria are not met.
Other information : Likely routes of exposure: ingestion, inhalation, skin and eye.
12.1. Toxicity
Ecology - general : May cause long-term adverse effects in the aquatic environment.
Hazardous to the aquatic environment, short-term (acute) : Not classified.
Hazardous to the aquatic environment, long-term (chronic) : Not classified.
Bentonite Powder
Persistence and degradability Not established.
Bentonite Powder
Bioaccumulative potential Not established
14.1. UN number
ADR
Transport hazard class(es) (ADR) : Not regulated
IMDG
Transport hazard class(es) (IMDG) : Not regulated
IATA
Transport hazard class(es) (IATA) : Not regulated
Special transport precautions : Do not handle until all safety precautions have been read and understood.
- Overland transport
Not regulated
- Transport by sea
Not regulated
- Air transport
Not regulated
14.7. Transport in bulk according to Annex II of Marpol and the IBC Code
Not applicable
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
15.1.1. EU-Regulations
Indication of changes:
None.
Data sources : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 16 December 2008 on classification, labelling and packaging of
substances and mixtures, amending and repealing Directives 67/548/EEC and
1999/45/EC, and amending Regulation (EC) No 1907/2006.
Other information : None.
Prepared by : Nexreg Compliance Inc.
www.Nexreg.com
Disclaimer: We believe the statements, technical information and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind.
The information contained in this document applies to this specific material as supplied. It may not be valid for this material if it is used in combination with any other materi-
als. It is the user’s responsibility to satisfy oneself as to the suitability and completeness of this information for the user’s own particular use.