Professional Documents
Culture Documents
Fig. 1
Q2(a) A dc analysis of the source follower network of Fig. 2 results in VGSQ = -2.86 V and 4.5
IDQ = 4.56 mA. Determine (i) Zi , (ii) Zo , (iii) Av.
Fig. 2
Page 1 of 3
Q2(b) Explain with a diagram the working principle of a current mirror circuit. 4.5
Find the mirrored current I1 in the circuit of Fig. 3.
Fig. 3
Q2(c) Determine the maximum frequency that may be used in the circuit of Fig. 4, if Op- 4.5
amp slew rate is SR = 0.5 V/µs. Comment whether the output shall be distorted or
not for the given signal frequency.
Fig. 4
Fig. 5
Q3(b) A0 4.5
The finite open-loop gain of an Op-amp varies with frequency as A( s ) .
s
1
b
Derive the expression of closed loop gain (ACL) of an inverting amplifier which
varies with frequency. Here, A0 = DC gain, ωb = corner frequency, Ri = ∞, Ro = 0.
Page 2 of 3
Q3(c) Derive the expression of the output voltage of a logarithmic amplifier with a 4.5
suitable diagram. (assume ideal Op-amp)
Q4(a) 4.5
Write the main advantage of instrumentation amplifier over difference amplifier.
Derive the expression of output voltage for the instrumentation amplifier.
Q4(b) Explain briefly class A, B and D power amplifiers. Mention the efficiency for each 4.5
type of power amplifier.
Q4(c) Calculate the input power, output power, and efficiency of the series-fed class A 4.5
amplifier circuit in Fig. 6 for an input voltage that results in a base current of 10 mA
peak.
Fig. 6
Q5(a) Design a phase-shift oscillator, so that the oscillating frequency (fo) is 400 Hz. 4.5
(Take value of C as 0.1 µF)
Explain amplitude stabilization in the phase-shift oscillator with a diagram.
Q5(b) Derive the expression of output frequency and condition for sustained oscillations of 4.5
Wien-Bridge Oscillators using a suitable diagram.
Q5(c) Determine the frequency and draw the waveform of output voltage (Vo) and capacitor 4.5
(Vc) voltage for the circuit of Fig. 7.
Fig. 7
Page 3 of 3