You are on page 1of 5

PT.

WILMAR NABATI INDONESIA


SAFETY DATA SHEET
Code: MSDS/190919-01
Date of issuance: September 2019
Revision 1: Sept 2019; Version: 1.2
PALM OIL MILL EFFLUENT

SECTION 1 – SUBSTANCE AND COMPANY IDENTIFICATION


Product identifier Palm Oil Mill Effluent (POME)
Relevant identified uses Suitable to be used as feed or raw material of biogas application in palm
oil mills or other industries
Supplier PT. Wilmar Nabati Indonesia
Factory address 1. Jl. Datuk Laksamana, Areal Pelabuhan Dumai – 28814, Riau
Tel: (0765) 33533 (hunting) Fax: (0765)33553

2. Jl. Pulau Sumatera, Kawasan Industri Dumai, Kelurahan Pelintung


Medang Kampai – 28816, Dumai

Emergency information Email: chiongong.luk@sg.wilmar-intl.com


Tel: +65 96306856 (office hour – UTC+8 hours)

SECTION 2 – HAZARDS IDENTIFICATION


According to Regulation (EC) No. 1272/2008 on classification, labelling and packaging of substances and
mixtures
Classification of the substance
No need for classification according to GHS criteria for this product

Label elements
No need for hazard warning label in accordance with GHS criteria

Other hazards
None

SECTION 3 – COMPOSITION/INGREDIENT INFORMATION


Main ingredient Effluent water from palm oil mill process, which contains very high organic
matter content
CAS No. Not applicable
EINECS No. Not applicable
Hazardous classification Not classified

SECTION 4 – FIRST-AID MEASURES


Description of first aid measures
Eye contact Rinse with plenty of water, consult with a physician if necessary
Skin contact Remove contaminated clothing, flush skin with water, consult with a
physician if necessary
Inhalation Move to fresh air. If suffocation is serious, consult with a physician
Ingestion Rinse mouth, drink plenty of water and get medical attention if
symptoms occur and consult a physician for medical advice

Most important symptoms and effects


No information available

Indication of any immediate medical attention and special treatment needed


Not required

Page 1 of 5
PT. WILMAR NABATI INDONESIA
SAFETY DATA SHEET
Code: MSDS/190919-01
Date of issuance: September 2019
Revision 1: Sept 2019; Version: 1.2
PALM OIL MILL EFFLUENT

SECTION 5 – FIRE-FIGHTING MEASURES


Suitable extinguishing media Dry chemical, carbon dioxide, foam, water
Unsuitable Extinguishing Media None

Special hazards arising from the substance


Cool containers exposed to flame with water

Advice for firefighters


Use self-contained breathing equipment if in confined place

SECTION 6 – ACCIDENTAL RELEASE MEASURES


Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Locate eye washes and emergency showers in all work and storage
areas. For personal protection, see section 8.

Environmental precautions
Avoid discharge into drains or water courses

Methods and materials for containment and cleaning up


Absorb onto an inert, absorbent substrate and sweep up to an approved disposal container. Wash area
with suitable detergent. Observe state, federal, and local disposal regulation.

SECTION 7 – HANDLING AND STORAGE


Precautions for safe handling
Avoid all unnecessary exposure. Avoid spills and keep away from drains. Wash hands after use. Material
can be slippery underfoot.

Conditions for safe storage


Store in a cool, dry, and well-ventilated area, away from direct sunlight

Specific end use(s)


See section 1

SECTION 8 – EXPOSURE CONTROL/PERSONAL PROTECTION


Control parameters None established

Exposure controls
Hygiene measures Handle in accordance with good industrial hygiene and safety practice
Engineering measures Good general ventilation should be used

Personal protective equipment


Eye/face protection Wear goggles

Page 2 of 5
PT. WILMAR NABATI INDONESIA
SAFETY DATA SHEET
Code: MSDS/190919-01
Date of issuance: September 2019
Revision 1: Sept 2019; Version: 1.2
PALM OIL MILL EFFLUENT

SECTION 8 – EXPOSURE CONTROL/PERSONAL PROTECTION (cont’d)


Skin protection Wear protective gloves, safety shoes
Respiratory protection Use only with adequate ventilation

Environmental Exposure Controls


Environmental manager must be informed of all major spillages

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES


Appearance Brownish, liquid
Odor Faint fatty acid odor
pH Not applicable
Slip melting point Not applicable
Initial boiling point Not applicable
Flash Point (0C) Not applicable
Evaporation rate No information available
Flammability No information available
Explosive limits No information available
Vapor pressure No information available
Vapor density No information available
Relative density No information available
Solubility in Water Insoluble
Partition coefficient: n-octanol/water Not applicable
Auto-ignition temperature No information available
Decomposition temperature No information available
Viscosity No information available
Explosive properties No information available
Oxidising properties No information available

SECTION 10 – STABILITY AND REACTIVITY


Reactivity No data available
Chemical stability Stable under normal conditions
Possibility of hazardous reactions None under normal processing
Conditions to avoid Exposure to heat and direct sunlight
Incompatible materials None in particular
Hazardous decomposition products None

SECTION 11 – TOXICOLOGICAL INFORMATION


Acute Toxicity No data available
Skin irritation Not irritating to the skin
Serious eye irritation Not irritating to the eye
Respiratory or skin sensitisation No data available
Germ cell mutagenicity No data available

Page 3 of 5
PT. WILMAR NABATI INDONESIA
SAFETY DATA SHEET
Code: MSDS/190919-01
Date of issuance: September 2019
Revision 1: Sept 2019; Version: 1.2
PALM OIL MILL EFFLUENT

SECTION 11 – TOXICOLOGICAL INFORMATION (Cont’d)


Carcinogenicity No data available
Reproductive toxicity No data available
STOT-single exposure No data available
STOT-repeated exposure No data available
Aspiration hazard No data available
Other Acute/Chronic Toxicity No additional adverse health effects noted

SECTION 12 –ECOLOGICAL INFORMATION


Toxicity No data available
Persistence and degradability Not applicable
Bioaccumulative potential No data available
Mobility in soil No data available
Results of PBT and vPvB assessment Not applicable
Other adverse effects None known

SECTION 13 – DISPOSAL CONSIDERATIONS


Waste treatment methods
No specific disposal method required. Dispose in accordance with local regulation. Do not discharge into
drains or water courses. The container might contain product residues

SECTION 14 – TRANSPORT INFORMATION


UN number Not regulated
UN proper shipping name Not regulated
Transport hazard class(es) Not hazardous according to RID/ADR, ADN, IMDG-Code,
ICAO-TI/IATA-DGR
Packing group Not regulated
Environmental hazards Marine pollutant: No
Special precautions for user Not regulated
Transport in bulk according to Annex
II of Marpol and the IBC Code Not regulated

SECTION 15 – REGULATORY INFORMATION


Safety, health, and environmental regulation/legislation specific for the substances or mixture
No data available

Chemical Safety Assessment


Not applicable

Page 4 of 5
PT. WILMAR NABATI INDONESIA
SAFETY DATA SHEET
Code: MSDS/190919-01
Date of issuance: September 2019
Revision 1: Sept 2019; Version: 1.2
PALM OIL MILL EFFLUENT

SECTION 16 – ADDITIONAL INFORMATION


Revision date 19 September 2019
Revision include all sections updated in accordance to Commission Regulation (EU) 2015/830

Disclaimer:
All statements, technical information and recommendations contained herein are based on available data which we believe to be reliable.
All statements or suggestions are made without warranty, expressed or implied, regarding accuracy of the information, the hazards
connected with the use of the material or the results to be obtained from the use thereof. Compliance with all applicable federal, state,
and local laws and local regulations remains the responsibility of the user. PT. Wilmar Nabati Indonesia assumes no liability or
responsibility for loss or damage resulting from improper use or handling of our products, from incompatible product combinations or
from the failure to follow instructions, warnings and advisories in the product's label or Material Safety Data Sheet.

Page 5 of 5

You might also like