Professional Documents
Culture Documents
CF35002
10/08
Camflex II ®
35002 Series
Rotary Control Valves
Features ......................................................................2
Numbering System ......................................................3
Actuator Mounting Guide............................................ 4
General Data ............................................................5-6
Flow Coefficients/Critical Flow Factor..........................6
C V and FL vs Travel ..................................................7-9
Materials of Construction......................................10-13
Dimensions and Weights ......................................14-15
Features
The Camflex® II is a heavy duty automatic throttling control valve • A large variety of reduced trim options are available in all sizes.
which incorporates the following features: • The triple, over-sized bearing system provides exceptional
• Flangeless body rating is a rugged ANSI Class 600. plug shaft guiding.
• Heavy duty guide lugs assure quick, positive alignment during • Shouldered shaft design.
installation. • Optional patented differential velocity device (DVD) separates
• Flanged version available 1" through 12" (25mm through compressible flowstreams into a high velocity core and a low
300mm) in 150 or 300 ANSI and 1" through 8" (25mm through velocity envelope flowstream. Provides up to 18dBA noise
200mm) in 600 ANSI. attenuation.
• Separable Bonnet design available. • Optional alloy constructions are available.
• Straight through flow pattern provides greater flow capacities. • Powerful, low profile spring diaphragm actuator guarantees
• Standard integral extension bonnet allows for a wide range positive “fail-safe” action.
of fluid temperature applications (-320˚F to 750˚F), • Splined shaft and actuator linkages, combined with low friction
(-196˚C to 400˚C). techniques, assure minimum deadband and hysteresis.
• The unique self-aligning eccentric rotating plug provides tight • Large, highly visible valve position indicator.
shut off and low dynamic forces. • Totally enclosed actuator linkage (purge option available).
Trade names noted throughout are for reference only. Masoneilan reserves the right to supply trade named material or its equivalent.
CF35002 SD - 10/08
35002 Series Camflex® II 2
Numbering System
Body
Actuator Type Actuator Mounting Trim Design
Series Design
(See guide Type Series
on page 4)
20 Manual Actuator 35
35 Spring-opposed 1. Metal Seat 2 SB
rolling-diaphragm 1. Parallel to pipeline, 2. Soft Seat (optional
valve closes on 3. Metal Seat w/ separable
stem extension. Differential bonnet)
2. Parallel to pipeline, Velocity Trim
valve opens on 4. Soft Seat w/
stem extension. Differential
3. Perpendicular to Velocity Trim
pipeline, valve
closes on stem
extension.
4. Perpendicular to
pipeline, valve
opens on stem
extension.
5. Parallel to pipeline,
valve closes on
stem extension.
6. Parallel to pipeline,
valve opens on
stem extension.
7. Perpendicular to
pipeline, valve
closes on stem
extension.
8. Perpendicular to
pipeline, valve
opens on stem
extension.
CF35002 SD - 10/08
35002 Series Camflex® II 3
Actuator Mounting Guide
CAMFLEX II VALVES
(Mounted On Horizontal Pipeline)
3 5 - 3 5 . 0 2
ilan
sone
Ma
.O
4
F.T 2
Masoneilan
.O
F.T
CAMFLEX II
N
- O PE
Plug -TO Plug
Position
AIR Position
.O ose n
F.T o -ClDirectio F.T
.O
8 w -T low
ed F
LEX
II
Floommend
MF
CA
ilan
sone
pen
Ma
Rec
-O
Masoneilan
.C w -To .C 6
F.T Flo F.T
CAMFLEX II
Plug Plug
Position Position
.C
F.T
.C
F.T
Ma
sone
ilan
CA
MF
LEX
II
1
.O
3
F.T E F.T
.O
L OS
-C
CAMFLEX II
R - TO
AI
Masoneilan
e os
o -Cl
w-T en
Flo
o -Opirection
T
w- low D
Flomended F Plug
o m
Plug Rec Position
.O
Position F.T
.O
F.T
Ma
sone
ilan
CA
MF
LEX
II
5 7
.C
F.T
.C
F.T
CAMFLEX II
Masoneilan
Notes:
1. It is recommended that the actuator always be mounted as shown above. For other positions, consult local sales office.
2. Installation is assumed to be in horizontal pipeline for orientation of airset and other accessories unless specified on order.
3. Action and orientation field reversible without additional parts. See Instruction EF5000.
4. Operating efficiencies may vary depending on valve configuration.
5. The above schematic does not reflect every possible body/actuator orientation, but should serve as an effective guide.
CF35002 SD - 10/08
35002 Series Camflex® II 4
General Data
Body Actuators
Type Spring-Opposed Rolling Diaphragm
• cast with integral bonnet Size
• cast with separable bonnet - 1"- 8" • 41⁄2" diameter with 31⁄2" (89mm) stroke
Flow Direction (1"-2" valves), (DN 25-50)
• flow to open or flow to close • 6" diameter with 53⁄4" (146mm) stroke
• (Differential Velocity Device trim flow to open only) (3"-4" valves), (DN 80-100)
Materials • 7" diameter with 71⁄4" (184mm) stroke
• carbon steel (6"-12" valves), (DN 150-300)
• 316 stainless steel (flangeless) • 9" diameter with 71⁄4" (184mm) stroke
• 316L stainless steel (flanged) (6"-12" valves), (DN 150-300)
• Hastelloy “C” (1"- 4")(DN 25-100) Range
Body Pressure Rating • 7-15 psi (1"-4"), (DN 25-100)
• ANSI Class 600 (per B16.34) standard • 7-24 psi (6"-12"), (DN 150-300) (7" diameter actuator)
(1"-12") (DN 25-300) except for flanged construction; • 7-24 psi (6"-12"), (DN 150-300) (9" diameter actuator, Air to Close)
valve rating is limited by flange rating • 8-25 psi (6"-12"), (DN 150-300) (9" diameter actuator, Air to Open)
End Connections Air Connection
• threaded - NPT for ANSI Class 600 • 1⁄4" NPT
rated connections (1") (DN 25) Yoke
• flangeless - clamps between • cast iron
ANSI Class 150, 300 or 600 rated flanges (flange rating Bearing
must be specified for 8"-12" (DN 200-300) valve for locator • sealed radial
lug drilling and tapping) Auxiliary Handwheel
• flanged - bolts to • solid disk with locking nut
ANSI Class 150 or 300 rated flanges (1"-12") (DN 25-300) • 6 2⁄5" diameter (1"-4" valves), (DN 25-100)
ANSI Class 600 rated flanges (1"- 8") (DN 25-200) • 10" diameter (6"-12" valves), (DN 150-300)
Standard Spring Diaphragm Actuator Materials Maximum Rated Flow Coefficients (CV) and Critical
Flow Factors (FL ) at Maximum Opening (50°)
Description Material
Yoke Cast Iron
Yoke Covers Polycarbonate Valve Size Flow to Open Flow to Close
Factor
Spring Barrel Die Cast Aluminum inches DN Rated C V FL Rated C V FL
Diaphragm Case Die Cast Aluminum 0.036 .5 0.98 .5 0.86
Piston Die Cast Aluminum 0.07 1 0.98 1 0.86
Diaphragm Buna-N with Dacron Insert
0.2 2.8 0.88 3 0.7
Piston Rod 303 St. St.
1 25 0.4 5.6 0.88 6 0.7
Clevis Carbon Steel Zinc Dichromate Plated
0.6 8.4 0.88 9 0.7
Clevis Pin 17-4 PH (H1075) St. St.
1 14 0.85 15 0.68
Lever Steel With Epoxy Surface
DVD 5
PTFE Filament Surface Bonded to
Lever Bearing 0.4 13.2 0.88 15.6 0.7
Glass Reinforced Plastic Backing
0.6 19.8 0.88 23.4 0.7
Handwheel and 1.5 40
Aluminum 1 33 0.85 39 0.68
Locknut
DVD 12.5
0.4 20 0.88 21.2 0.7
Standard Actuator Characteristics and Travel Times
0.6 30 0.88 31.8 0.7
Travel Time (sec.) 2 50
Diaphragm 1 50 0.85 53 0.68
Actuator Actuator
Effective Increasing Decreasing DVD 18
Diameter Stroke
Area Instrument Instrument 0.4 54 0.88 58 0.7
Signal Signal
in. cm sq. in. cm2 in. cm 0.6 81 0.88 87 0.7
41⁄2 11.4 14 90 31⁄2 8.9 1.2 2.4 3 80
1 135 0.85 145 0.68
6 15.2 24 155 53⁄4 14.6 3 6.3
7 17.8 36 232 71⁄4 18.4 7.6 9.8 DVD 48
9 22.9 75 483 71⁄4 18.4 17 24 0.4 92 0.88 92 0.7
Measured with direct positioner at 30 psi (2 bar) supply 0.6 138 0.88 138 0.7
4 100
4700P positioner with tubing size 1⁄4 in. 1 230 0.85 230 0.68
Temperature/Seat Leakage DVD 78
0.4 200 0.88 200 .07
Max. Seat
Valve Size Seat Temp. Range* 0.6 300 0.88 300 0.7
Leakage, ANSI 6 150
in. DN Type Min. Max. FCI/70.2 Class 1 500 0.85 500 0.68
-320˚F* +750˚F DVD 181
Metal IV 0.4 340 0.88 340 0.7
25 to (-196°C) (400°C)
1-12
300 ** -320˚F* +450˚F 0.6 510 0.88 510 0.7
Soft Seat VI 8 200
(-196°C) (232°C) 1 850 0.85 850 0.68
DVD 308
* For Stainless Steel Bodies Only.
**Temperature Limited by Teflon® Seal. 0.4 520 0.88 520 0.7
0.6 780 0.88 780 0.7
10 250
750°F (400°C) 1 1300 0.85 1300 0.68
650°F (340°C)
DVD 486
550°F (300°C)
450°F (230°C) 0.4 700 0.88 700 0.7
350°F (180°C) 0.6 1050 0.88 1050 0.7
250°F (120°C) 12 300
150°F (70°C) 1 1750 0.85 1750 0.68
DVD 684
Note: Low flow trims (.036+.07 factor) requires use of SVI II AP, or FVP digital
positioners.
The ability of the Camflex valve to handle a wide range of process fluid
temperatures is due to the long, integrally-cast bonnet. This affords
ample radiation surface to normalize the packing temperatures.
CF35002 SD - 10/08
35002 Series Camflex® II 6
(CV) and (FL) Versus Travel
CF35002 SD - 10/08
35002 Series Camflex® II 7
(CV) and (FL) Versus Travel
CF35002 SD - 10/08
35002 Series Camflex® II 8
(CV) Versus Travel
Note: The differential velocity device is used for aerodynamic noise reduction. It must be used with .6 factor trim flow to open.
Differential
Flow Direction Velocity
Device
Body
CF35002 SD - 10/08
35002 Series Camflex® II 9
Materials of Construction
2 1 25 8 7 6 5 12 9 11 20 19 13 15 14
18A
Provides long term
reliable extremely
11 low emission shaft
O-RING seal performance.
O-RING
This economical
LOWER GUIDE BUSHING
solution to fugitive
17B emissions won’t
compromise control
7 performance, and
is suitable for use
17A in environmentally
sensitive applications.
CF35002 SD - 10/08
35002 Series Camflex® II 10
Materials of Construction
CF35002 SD - 10/08
35002 Series Camflex® II 13
Dimensions and Weights
Dimensions (inches)
Valve size A H M
1 25 4.00 4.00 6.8 11.5 10.0 6.3 5.5 4.4 2.64 2.64 2.01 8.1 1.5 5.4 6.5 9.0 9.0 9.0
1 1/2 40 4.50 6.9 11.5 10.0 6.3 5.5 4.4 2.44 2.32 9.2 2.0 6.5 6.5 10.0 10.0 10.0
2 50 4.88 6.9 11.5 10.0 6.3 5.5 4.5 2.44 2.44 9.4 2.6 6.7 10.5 10.5 10.5 10.5
3 80 6.50 10.3 16.8 10.5 6.3 6.9 5.1 3.82 3.39 13.1 3.3 9.6 11.8 13.5 14.0 14.0
4 100 7.62 10.4 16.8 10.5 6.3 6.9 5.2 4.17 4.17 14.0 4.3 10.5 13.0 14.0 16.0 16.5
6 150 9.00 13.0 20.4 12.0 10.0 8.6 8.4 5.00 5.00 17.0 5.8 12.7 15.5 16.0 18.5 18.5
8 200 9.56 13.1 20.4 12.0 10.0 8.6 8.5 5.83 5.83 18.5 8.0 14.2 15.5 18.5 19.5 21.0
10 250 11.69 13.2 20.4 12.0 10.0 8.6 8.6 6.57 6.57 22.6 9.9 18.3 20.0 20.5 22.5 24.5
12 300 13.31 13.3 20.4 12.0 10.0 8.6 8.7 7.24 7.24 24.0 10.9 19.7 20.0 22.5 24.8 25.5
CF35002 SD - 10/08
35002 Series Camflex® II 14
Dimensions and Weights
Dimensions (millimeters)
Valve size A H M
1 25 102 102 173 293 253 160 140 112 67 67 51 206 38 137 165 229 229 229
1 1/2 40 114 175 293 253 160 140 113 62 59 234 51 165 165 254 254 254
2 50 124 176 293 253 160 140 115 62 62 239 66 170 267 267 267 267
3 80 165 262 426 266 160 175 130 97 86 333 84 244 300 343 356 356
4 100 194 264 426 266 160 175 131 106 106 356 109 267 330 356 406 419
6 150 229 330 517 306 254 218 213 127 127 432 147 323 394 406 470 470
8 200 243 333 517 306 254 218 216 148 148 470 203 361 394 470 495 533
10 250 297 335 517 306 254 218 219 167 167 574 251 465 508 521 572 622
12 300 338 338 517 306 254 218 222 184 184 610 277 500 508 572 630 648
CF35002 SD - 10/08
35002 Series Camflex® II 15
DIRECT SALES OFFICE LOCATIONS
BELGIUM INDIA RUSSIA UNITED ARAB
Phone: +32-2-344-0970 Mumbai Veliky Novgorod EMIRATES
Fax: +32-2-344-1123 Phone: +91-22- 8354790 Phone: +7-8162-15-7898 Phone: +971-4-8139-200
Fax: +91-22-8354791 Fax: +7-8162-15-7921 Fax: +971-4-8838-038
BRAZIL New Delhi Moscow
Phone: +55-11-2146-3600 Phone: +91-11-2-6164175 Phone: +7 495-585-1276 UNITED KINGDOM
Fax: +55-11-2146-3610 Fax: +91-11-5-1659635 Fax: +7 495-585-1279 Woodburn Green
Phone: +44-1628-536300
CANADA ITALY SAUDI ARABIA Fax: +44-1628-536319
Ontario Phone: +39-081-7892-111 Phone: +966-3-341-0278
Phone: +905-335-3529 Fax: +39-081-7892-208 Fax: +966-3-341-7624 UNITED STATES
Fax: +905-336-7628 Massachusetts
JAPAN SINGAPORE Phone: +508-586-4600
CHINA Chiba Phone: +65-6-6861-6100 Fax: +508-427-8971
Phone: +86-10-8486-4515 Phone: +81-43-297-9222 Fax: +65-6-6861-7172 Corpus Christi, Texas
Fax: +86-10-8486-5305 Fax: +81-43-299-1115 Phone: +361-881-8182
SOUTH AFRICA Fax: +361-881-8246
FRANCE KOREA Phone: +27-11-452-1550 Dresser Direct
Courbevoie Phone: +82-2-2274-0748 Fax: +27-11-452-6542 Deer Park, Texas
Phone: +33-1-4904-9000 Fax: +82-2-2274-0794 Phone: +281-884-1000
Fax: +33-1-4904-9010 SOUTH & CENTRAL Fax: +281-884-1010
MALAYSIA AMERICA AND THE Dresser Flow Technologies
GERMANY Phone: +60-3-2161-0322 CARIBBEAN Houston, Texas
Viersen Fax: +60-3-2163-6312 Phone: +281-671-1640 Phone: +281-671-1640
Phone: +49-2162-8170-0 Fax: +281-671-1735 Fax: +281-671-1735
Fax: +49-2162-8170-280 MEXICO California
Frankfurt Phone: +52-5-310-9863 SPAIN Phone: +562-941-7610
Phone: +49-69-439350 Fax: +52-5-310-5584 Phone: +34-93-652-6430 Fax: +562-941-7810
Fax: +49-69-4970802 Fax: +34-93-652-6444
THE NETHERLANDS
Phone: +31-10-438-4122
Fax: +31-10-438-4443
Dresser Masoneilan
85 Bodwell Street
Avon, MA 02322-1190
Tele: 508-586-4600 / Fax: 508-941-5497
Email: sales@masoneilan.com
CF35002 10/08