Professional Documents
Culture Documents
DFW Electric Cremator Electric Human Cremation Furnace
DFW Electric Cremator Electric Human Cremation Furnace
Dulleweg 43
Operation-friendly
The DFW Electric is equipped with the unique DFW
OMR control system. This makes the cremator, the
AIM and the downstream filter installation very easy
to operate. The AIM can be activated by just a few
clicks on the touch screen, following which the coffin
is automatically inserted. The cremation process can
then be started. These actions are stored in the system
and visualised on the touch screen. The cremation
process parameters can simply be changed, if needed,
via the same touch screen. It is also possible to assist
you through the internet if changes need to be made
to the cremation process (see leaflet on Control
System).
Economic
The energy costs of a DFW Electric are lower than those of a gas or oil fuelled
cremator when two or more cremations are carried out a day. During the cremation,
the energy present in the body and the coffin can be used efficiently, resulting
in lower energy costs. The reliable continuous measurement of O2, temperatures
and low pressures, ensures a constant cremation process. Keeping the cremator
at constant temperature will extend the life of the fireproof masonry. As a result,
maintenance costs are kept at a very low level. Its high quality, low investment and
its excellent performances in the field of ergonomics and electricity consumption
make the DFW Electric the right ‘green’ choice.
Dimensions:
Total cremator single-end 4,285 x 2.480 x 3,300 mm (lxwxh)
Main chamber 2,400 x 1,050 x 750 mm (lxwxh)
Secondary chamber 2.65 m3
Time of residence in secondary chamber > 2 sec.
Cremator door 1050 x 780 mm (wxh)
Total weight cremator 19,500 Kg
Energy:
The cremator will be kept on temperature 24 hours per day, seven days a week.
The energy consumption is <15 kW per hour at 3 cremations per day.
Operation-friendly
Capacity:
Average cremation time of each cremation Approx. 120 min.
Maximum weight of coffin 250 Kg
Maximum dimensions of coffin 2,200 x 1,000 x 530/600 mm (lxwxh)
Control:
DFW Europe Control system OMR control system
Ash pan lift Thermocouples NiCrNi Type K
Oxygen measurement Xendos 2700