You are on page 1of 2

Pneumatic

1. With engines and APU running, and the APU BLEED selected ON, choose the correct statement:
a. Engine bleed valves open, x bleed valve opens, APU bleed valve closes.
b. Engine bleed valves close, x bleed valve opens, APU bleed valve opens.
c. Engine bleed valves open, x bleed valve closes, APU bleed valve opens.
d. Engine bleed valves close, x bleed valve closes, APU bleed valve opens.

2. To provide external air for engine number 2 start, the following switching is required:
a. Pneumatic x-bleed auto.
b. Pneumatic x-bleed open.
c. APU bleed switch on.
d. Engine bleed valve closed.

3. Air bleed from the engines is:


a. Not cooled prior to being used by the systems.
b. Cooled in a heat exchanger by cooling air bleed from fan section.
c. Cooled using ambient air.
d. Cooled by the pack primary heat exchangers.

4. Sources for high pressure air are supplied from:


a. Engine 1 and 2 bleed systems, APU load compressor, HP ground connection.
b. Engine 1 and 2 bleed systems.
c. Engine 1 and 2 bleed systems and APU load compressor.
d. Engine bleed systems, LP or HP ground connection.

5. Pneumatic system operation is controlled and monitored by:


a. One bleed monitoring computer.
b. Two bleed valve computers.
c. Two bleed monitoring computers.
d. Two pressure regulating valves.

6. What operates the x-bleed valve?


a. Two pneumatic motors.
b. Two BMC's.
c. Two electrical motors.

7. If the bleed valve is closed electrically, the HP valve:


a. Opens automatically.
b. Closes automatically.
c. Goes to half open position.
d. Closes if engine is not running.

8. Temperature regulation is achieved by the pre cooler which regulates and limits the temperature to: a.
150°.
b. 85°.
c. 200°.

d. 45° +/- 5.

9. When APU bleed is selected the cross bleed valve goes to:
a. Open position.
b. Closed position.
c. Is not affected.
d. Auto.

10. Cross bleed valve is provided with 2 electrical motors:


a. Two for the automatic mode.
b. Two for the manual mode.
c. One high speed, one low speed.
d. One for the automatic mode, the other one for the manual mode.

You might also like