3/05/2023 11:09:37 AM (Brookvale) - Page 1/2

igus® GmbH
Spicher Str. 1a
51147 Cologne
Tel.: +49 (0) 2203-96 49-0
Fax: +49 (0) 2203-96 49-222
E-Mail: i_info@igus.de

Robot equipment

Robot
Manufacturer: Comau
Type: NJ
Model: NJ 60 - 2.2

Robot diagram as an example

 3/05/2023 11:09:37 AM (Brookvale) - Page 2/2

Axes 3 to 6

triflex® RSEC linear – linear retraction system Small, compact retraction system for robots with
low load capacities. Retraction system with chain
size 60 based on the linear retraction systems 40
and 50.
e-chain® triflex® R TRE.B series "easy" design, up to four times the bend radius
Part No.: TRE.60.087.0.B strength.
Length: 1,856 mm

triflex® protector with quick-release mechanism, Protectors can be used at the points of contact
clip-on mechanism (optional). In extreme applications, for a long
Part No.: TR.60.30 service life. Easy gliding over edges.
Quantity: 3 Unit
triflex® RSE support For triflex® R energy supply system lateral
Part No.: TR.919.540.60.02 deflection.
triflex® RSEC linear – retraction system
Part No.: TR.RSEC.60

Clamp
Part No.: TR.910.544

triflex® compact connection with tiewrap plate Cables secured safely and easily with cable ties.
Part No.: TR.60.21.01.30 Diverse adjusting options.

Disassembly tool For easy separation of e-chain® links at any

Part No.: MAT0051135 position, even when the chain is full.

Product warranty

The information in this software, and specifically the data from the expert are based on the current state of our knowledge about the described products. A
legally binding assurance of certain properties or the fitness for a certain use cannot be derived. igus® assumes no liability for losses of any kind resulting
from the use of the products.
We recommend that you always check the suitability of the products for a certain purpose in a field test. Please take advantage of our consulting services.
Due to continuing technical advances, we reserve the right to make technical changes and product improvements at any time.