Professional Documents
Culture Documents
How many processor chips does the SPARC T7-2 server have?
1 SPARC M7 32-core 4.13Ghz CPU
2 SPARC M7 32-core 4.13Ghz CPUs (*)
4 SPARC M7 32-core 4.13Ghz CPUs
Incorrect. Please refer back to the lesson “SPARC T7 Server Overview.”
(0/1) Points
17. How many processor chips does the SPARC T7-1 server have?
1 SPARC M7 32-core 4.13Ghz CPU (*)
2 SPARC M7 32-core 4.13Ghz CPUs
4 SPARC M7 32-core 4.13Ghz CPUs
Incorrect. Please refer back to the lesson “SPARC T7 Server Overview.”
(0/1) Points
18. What is the maximum memory configuration in a SPARC T7-1 server?
16 DIMM slots with memory mezzanine (*)
32 DIMM slots with memory risers
64 DIMM Slots
Incorrect. Please refer back to the lesson “SPARC T7 Server Overview.”
(0/1) Points
19. What is the maximum memory configuration in a SPARC T7-4 server?
16 DIMM slots with memory risers
32 DIMM slots with memory mezzanines
64 DIMM slots (*)
Incorrect. Please refer back to the lesson “SPARC T7 Server Overview.”
(0/1) Points
20. What are two benefits of DIMM sparing?
(Choose all correct answers)
1 out of 16 DIMMs per socket can be spared (*)
2 out of 16 DIMMs per socket can be spared
Migration of contents from failing DIMM takes place, with minor impact on
performance
Migration of contents from failing DIMM takes place, with no visible impact on
performance (*)
Which one of these SPARC T7 server installation steps are in the correct order?
Prepare terminal access, turn on power to the SP, monitor the boot process via ILOM, and
power on the server and set up the operating system. (*)
Power on the server and set up the operating system, prepare terminal access, turn on power
to the SP, and monitor the boot process via ILOM.
Monitor the boot process via ILOM, power on the server and set up the operating system.
prepare terminal access, and turn on power to the SP.
Incorrect. Please refer back to the lesson “SPARC T7 Server Installation.”
(0/1) Points
37. Which one of these preliminary SPARC T7 server installation steps are in the correct
order?
Review the SPARC T7 documentation, review the server specifications and site
requirements, and take safety and ESD precautions. (*)
Review the server specifications and site requirements, take safety and ESD precautions, and
review the SPARC T7 documentation.
Take safety and ESD precautions, review the server specifications and site requirements, and
review the SPARC T7 documentation.
Correct!
(1/1) Points
38. Which resource are you required to use at a customer site for server installation?
Site Requirements
Product Documentation
EIS Installation Checklists (*)
Incorrect. Please refer back to the lesson “SPARC T7 Server Installation.”
(0/1) Points
39. What is the password for root in your initial SP login?
root
changeme (*)
admin
default
Incorrect. Please refer back to the lesson “SPARC T7 Server Installation.”
(0/1) Points
40. What do you type to login to the SP in a SPARC T7 server?
Start / system
Root and changeme (*)
Host and changeme
What are two options that can function as a systems console during the SPARC T7
installation?
(Choose all correct answers)
iPhone
ASCII terminal (*)
Workstation (*)
Kindle
Incorrect. Please refer back to the lesson “SPARC T7 Server Installation.”
(0/1) Points
SPARC T7 Servers FRU CRU
(Answer all questions in this section)
42. In the T7-2, to remove the power supply backplane, you must:
Remove the memory risers, the air baffle, the drives, the power supply ribbon cable and
cover, and the bus bar screws.
Remove the memory risers, the air baffle, the power supplies, the power supply ribbon cable
and cover, and the bus bar screws. (*)
Remove the memory mezzanines, the air baffle, the power supplies, the power supply ribbon
cable and cover, and the bus bar screws.
Correct!
(1/1) Points
43. Which three of these T7-4 server components are CRUs?
(Choose all correct answers)
Cable kit
Main module (*)
Rear IO module (*)
Processor module (*)
Rear chassis sub assembly
Correct!
(1/1) Points
44. Which three of these T7-1 server components are CRUs?
(Choose all correct answers)
SAS SSD (*)
PCIe card (*)
Motherboard
Disk backplane
Memory mezzanine (*)
Incorrect. Please refer back to the lesson “SPARC T7 Server FRU CRU.”
(0/1) Points
45. In the T7-4 where is the eUSB is located?
In the main module
On the rear IO board (*)
In the processor filler module