Professional Documents
Culture Documents
SECTION- A
MARKS
1. (a) What is electric load? Why loads are connected in parallel with the supply? 3
(b) write down the characteristics of open and short electrical circuits. 03
(c) Determine the unknown currents in the following circuit. 05
(b) For na resistive load operated from AC source, prove that 𝑃 = 𝑉𝐼 𝑐𝑜𝑠∅, where the symbols have their usual significant. 5
(c) Determine the values of R and VS so the=at the two circuits shown below become equivalent. 02
3. (a) Use mesh current method to determine the power dissipated through the 4Ω resistor. 05
(b) Find the Tevenin equivalent circuit for the network shown below. 03
4. (a) Define Voltage regulator. Determine the voltage Regulation of the following circuit in terms of RS and RL. 3
6. (a) Prove that capacitors and inductors do not consume any power. 3
(b) Find RMS value for the following waveform. 05
(c) What is power factor? Discuss its significance in electrical power system. 03
7. (a) Draw the phasor diagram for the series resistance circuit at resonance. Also, draw Z T versus frequency curve for series resistance 3
circuit.
(c) Determine which type of load in the box (shown below) for the following voltage and current relations. 3
(i) v=100 sin(wt+20°), i=20 sin(wt-10°)
(ii) v=50 cos(wt+30°), i=10 sin(wt-10°)
(b) Determine the voltage v(t) as shown in the following circuit if the input i(t) is a nonsinusoidal waveform whose Fourier series 6
can be approximated as i(t)=2+10 cos(t+10°)+6 cos(3t+35°) amp.