Professional Documents
Culture Documents
The design wind pressure shall be computed using the following equation:
Model Name: 6.0 meter square steel lighting with 4 projectors and
square light
Revision Number: 00
19 February 2022
6.0 meter square steel lighting with 4 projectors and square light
Contents 19 February 2022
Contents
1. Model geometry .................................................................................................................................................. 4
1.1. Joint coordinates ...................................................................................................................................... 4
1.2. Joint restraints .......................................................................................................................................... 5
1.3. Element connectivity................................................................................................................................. 5
2. Material properties .............................................................................................................................................. 6
3. Section properties ............................................................................................................................................... 7
3.1. Frames..................................................................................................................................................... 7
3.2. Areas ....................................................................................................................................................... 8
3.3. Solids ....................................................................................................................................................... 8
4. Load patterns ...................................................................................................................................................... 8
4.1. Definitions ................................................................................................................................................ 9
5. Load cases ......................................................................................................................................................... 9
5.1. Definitions ................................................................................................................................................ 9
5.2. Static case load assignments ................................................................................................................... 9
5.3. Response spectrum case load assignments ........................................................................................... 10
6. Load combinations ............................................................................................................................................ 10
7. Structure results ................................................................................................................................................ 12
7.1. Mass summary ....................................................................................................................................... 12
7.2. Modal results .......................................................................................................................................... 13
7.3. Base reactions ....................................................................................................................................... 14
8. Joint results ...................................................................................................................................................... 14
9. Frame results .................................................................................................................................................... 19
10. Area results .................................................................................................................................................... 47
11. Material take-off .............................................................................................................................................. 51
12. Design preferences ......................................................................................................................................... 51
12.1. Steel design ......................................................................................................................................... 52
12.2. Concrete design ................................................................................................................................... 52
12.3. Aluminum design .................................................................................................................................. 52
12.4. Cold formed design .............................................................................................................................. 53
13. Design overwrites ........................................................................................................................................... 53
13.1. Steel design ......................................................................................................................................... 53
14. Design summary ............................................................................................................................................. 55
14.1. Steel design ......................................................................................................................................... 55
List of Figures
Figure 1: Finite element model ................................................................................................................................ 4
Figure 2: Deformed shape .................................................................................................................................... 12
List of Tables
Table 1: Joint Coordinates ...................................................................................................................................... 4
Table 2: Joint Restraint Assignments ...................................................................................................................... 5
Table 3: Connectivity - Frame ................................................................................................................................. 5
Table 4: Frame Section Assignments ...................................................................................................................... 5
Table 5: Connectivity - Area .................................................................................................................................... 6
Table 6: Area Section Assignments......................................................................................................................... 6
Table 7: Material Properties 02 - Basic Mechanical Properties ................................................................................ 6
Table 8: Material Properties 03a - Steel Data .......................................................................................................... 6
Table 9: Material Properties 03b - Concrete Data .................................................................................................... 6
1. Model geometry
This section provides model geometry information, including items such as joint coordinates, joint restraints, and
element connectivity.
Z
Y X
3 22 19 20 21
628 18 15 16 17
3 PLATE 20 MM Default
628 PLATE 20 MM Default
2. Material properties
This section provides material property information for materials used in the model.
3. Section properties
This section provides section property information for objects used in the model.
3.1. Frames
SHS 250X250X4 1. 1. 1. 1. 1. 1. 1. 1.
SHS 30x30x3 1. 1. 1. 1. 1. 1. 1. 1.
3.2. Areas
PLATE 20 MM 1. 1. 1. 1. 1. 1. 1.
PLATE 20 MM 1.
3.3. Solids
4. Load patterns
This section provides loading information as applied to the model.
4.1. Definitions
DEAD Dead 1.
LIGHT Super Dead 0.
WIND Wind 0. None
TEMPERATURE Temperature 0.
5. Load cases
This section provides load case information.
5.1. Definitions
DEAD Non-Compos
ite
MODAL Other
LIGHT Long-Term
Composite
WIND Short-Term
Composite
TEMPERATURE Short-Term
Composite
6. Load combinations
This section provides load combination information.
DSTL11 LIGHT 1.
7. Structure results
This section provides structure results, including items such as structural periods and base reactions.
8. Joint results
This section provides joint results, including items such as displacements and reactions.
9. Frame results
This section provides frame force results.
DCH-MRF 0.75 0.95 CEN Default Eq. 6.10 Class 2 Method 2 (Annex
B)
3 Program 0. 0. 0. 0. 0.
Determined
8 Program 0. 0. 0. 0. 0.
Determined
36 Program 0. 0. 0. 0. 0.
Determined
37 Program 0. 0. 0. 0. 0.
Determined
38 Program 0. 0. 0. 0. 0.
Determined
40 Program 0. 0. 0. 0. 0.
Determined