Professional Documents
Culture Documents
HP50 Motor
Built for power
Two-shift spool
Valve
Integrated
parking brake
Duo-cone seal
Rotating housing
More starting torque in Eaton’s HP50 motor benefits
• Highest starting torque
two-speed mode •
efficiency in high-speed
Low pressure drop
With productivity as the market driver, the popularity of two-speed mode • Minimal heat generation
has become the standard on tracked machines. Typically, high-speed mode • Ideal combination of
was used only for transport and low-speed mode for work functions such performance, reliability,
as plowing into a pile and starting off with a load. But that is changing as and value
operators perform more work in high-speed mode to complete jobs faster. Technical specifications
While the HP50 matches the performance of radial piston motors at low • A high pressure (6000 psi)
speed, results show that it surges ahead of the competition in two-speed and high flow (70 GPM)
Geroler motor
mode. The HP50 generates as much as 23% more starting torque than
competing radial piston motors when in two-speed mode. This means less • Displacement: 42.5 – 95.0 in3/r
shifting and a more efficient workflow. (696 - 1557 cm3/r)
• Torque: Up to 50,000 in-lbs.
Low speed starting torque efficiency High speed starting torque efficiency (5650 Nm)
80% 80% • Two-speed capabilities with
70% 75%
73% 74% 70% the option of spring applied
60% 60% 66% 67% hydraulic release brake
50% 50%
Committed to excellence
40% 40%
40% Decision makers turn to
30% 30%
Eaton for an unwavering
20% 20% commitment to personal
10% 10% support that makes customer
0% 0%
success a top priority. Each
HP50 Radial piston Axial piston gearbox HP50 Radial piston Axial piston gearbox product is independently
Note: Low speed - 5000 psi @ 1 rpm Note: High speed - 5000 psi @ 1 rpm tested and backed by
industry-leading warranties,
and the largest engineering
CTL operators demand a lot from their equipment. Getting the job done
quickly often means working at top speed. Eaton’s direct drive solution
reliably achieves higher speeds over the competition. The HP50 can put your
machine at the top of the chart in terms of travel, and higher speed equals
greater production.
14
12 13.5
12.3
10 11.5
Speed (mph)
10.1 11.3
8
To learn more about Eaton’s
6 HP50 Series motors,
4 visit eaton.com/HP50 or
2 contact your Eaton sales
11.3 9.0 8.4 7.8 7.6
0 representative.
Bobcat John Deere CAT JCB Case
(Direct Drive) (Axial piston gearbox) (Axial piston gearbox) (Direct Drive) (Axial piston gearbox)
Wheeled loader
Reference:
Bobcat : http://www.bobcat.com/loaders/compact-track-loaders/models/t590/specs-options
Deere: http://www.deere.com/en_US/products/equipment/compact_track_loaders/329e/329e.page
CAT: http://www.cat.com/en_US/products/new/equipment/compact-track-and-multi-terrain-loaders/compact-track-loaders/1000002410.html
CASE: http://www.casece.com/en_us/Gallery/Downloads/CTL_TR340/CTL-TR340-T4F-Specs.pdf
JCB: http://www.jcbna.com/products/Machines/Compact-Track-Loaders.aspx
Minimal heat generation Reliability through
robust design
The HP50 increases efficiency by reducing heat
generation across all flow points by maintaining a low
No-Load Pressure Drop (NLPD). As shown by the graph, In accelerated durability tests simulating a high-pressure
lower pressure means less parasitic horsepower losses corner horsepower condition, the HP50 showed a
due to heat generation. This can save up to 1 HP by significant gain in expected product life—up to four times
just switching the propel system to the HP50. Less the life of radial piston motors. (And up to ten times
heat means the motor operates at a lower temperature, the life against axial piston gearbox motors.) The unique
reducing cooling costs and space requirements, and Geroler design profile and optimized driveline of the
makes more power available to the machine’s HP50 motor matches the power outputs of the new
work circuits. Tier 4 and 5 engine designs.
150
Life (hours) 400 431
100
300
50 HP50
Radial piston 200
0 Axial piston gearbox 194
5 10 15 20 25 30 35
100
GPM 107
65
51
0
NLPD in high speed HP50 Radial piston competitor 1 Radial piston competitor 2
600
500
Frictional losses (PSID)
400
300
200
100 HP50
Radial piston
0 Axial piston gearbox
5 10 15 20 25 30 35
GPM
© 2016 Eaton
All Rights Reserved
Printed in USA
Document No. E-MOTD-BB001-E1
Eaton is a registered trademark.
Eaton
All other trademarks are property
Eaton Hydraulics Group Asia Pacific
of their respective owners.
Hydraulics Group USA Eaton Eaton Building
14615 Lone Oak Road Hydraulics Group Europe 4th Floor, No. 3 Lane 280 Linhong Rd.
Eden Prairie, MN 55344 Route de la Longeraie 7 Changning District Follow us on social media to get the
USA 1110 Morges Shanghai 200335 latest product and support information.
Tel: 952-937-9800 Switzerland China
Fax: 952-294-7722 Tel: +41 (0) 21 811 4600 Tel: (+86 21) 5200 0099
www.eaton.com/hydraulics Fax: +41 (0) 21 811 4601 Fax: (+86 21) 5200 0400