Professional Documents
Culture Documents
CO1: Acquire practical knowledge on the fabrication, testing and characterization of castings and
welded joints.
CO2: Analyze the casting and welding experimental results using statistical tools
OBJECTIVES:
To perform molding and casting operation for sand casting based on the prepared pattern.
To analyze the quality of moulds and castings products by sand casting operation.
To understand the various joint configuration in welding and to study the effect of welding
parameters on joint characteristics.
To evaluate the mechanical properties of aluminium castings and welded joints.
To gain practical knowledge the microstructural characteristics of cast products and welded joints
LIST OF EXPERIMENTS:
S.N Experiments – Metal Casting
o
Fabricate aluminium flat tensile samples as per ASTM E8M standard using sand casting process
1
(Expendable (sand) mould and permanent pattern)
Fabricate aluminium flat tensile samples as per ASTM E8M standard using lost foam
2
process (Expendable (sand) mould and pattern)
Fabricate aluminium flat tensile samples as per ASTM E8M standard using gravity die casting
3
(permanent metallic mould).
Fabricate aluminium round tensile samples as per ASTM E8M standard using gravity die casting
4
(permanent metallic mould).
5 Macro and Microstructure analysis of Al cast products
6 Tensile, impact, hardness, and bend strength properties evaluation of Aluminium casting