Professional Documents
Culture Documents
Department of Education
Region X
Division of Bukidnon
Kadingilan I District
BAGOR ELEMENTARY SCHOOL
I. Read carefully and choose the letter of the correct answer. Write your answer on the
answer sheet provided.
____ 1. Used to drive in or remove screws that fasten electrical wires or other electrical accessories.
a. pliers c. wire stripper
b. screwdrivers d electric drill
____ 2. The tool used to remove the insulation from a wire, usually to enable the wire to be spliced or
connected to gadgets or other electrical devices.
a. pliers c. wire stripper
b. screwdrivers d electric drill
____ 3. The tool used for bending wires in order to make loops.
a. diagonal pliers c. side-cutting pliers
b. long-nose pliers d. mechanical pliers
____ 4. This material is where you connect the male plug of your appliance in order to get electrical
power.
a. flat cord c. male plug
b. doorbell d. convenience outlet
_____5. A material used for allowing the current flow in getting electrical power.
a. switch c. male plug
b. receptacle d. convenience outlet
____ 6. This is a simple electrical gadget where you can plug your electrical appliance in order to run.
a. extension cord c. buzzer
b. lampshade d. plugs
____ 7. An electrical device that rings when the electrical circuit is activated by the switch.
a. extension cord c. buzzer
b. lampshade d. plugs
____ 8. This is an electrical device used for lightning an area when reading or controlling the light in
the room.
a. extension cord c. buzzer
b. lampshade d. plugs
____ 10. Creating shades of lights and dark patterns in a composition or design.
a. sketching c. outlining
b. shading d. carving
II. Fill in the blank. Write the letter of the tools or materials in making simple electrical
gadgets in the picture provided.
a. Hammer b. Male Plug c. Electrical Wire
d. Hacksaw e. Screwdriver f. Tester
_______11. ________12.
III. Read carefully and choose the letter of the correct answer. Write your answer on the
answer sheet provided.
_______16. The process of using a lathe to make various forms and shapes of wood.
a. Hand carving b. wood turning c. flocking
_______17. An art using fire or heat to decorate wood product.
a. Pyrography b. Inlaying c. Hand carving
_______18. A technique which powder is applied on woods or other materials.
a. Painting b. gilding c. texturing
_______19. ______ is used to color wood.
a. Texturing b. painting c. etching
_______20. A method of creating designs using sharp objects.
a. Flocking b. pyrography c. hand carving
_______21. Enhancing a product means ______ the appearance of the product?
a. improving c. decorating
b. beautifying d. all of the above
_______22. Decorating the product may be done by putting ______ on the surface of the product.
a. drawing c. finishes
b. accessories d. all of the above
_______ 23. Gifts are usually given during the store opening, anniversary and Christmas season.
a. Promotional Gift b. Transit Advertising
b. Online Selling d. Electronic Media
_______ 24. Advertising billboards printed on cars, taxis, and buses.
a. Promotional Gift b. Transit Advertising
b. Online Selling d. Electronic Media
_______ 25. Posting and uploading product information on Facebook and websites.
a. Promotional Gift b. Transit Advertising
b. Social Media/Online Selling d. Electronic Media
_______ 26. A piece of paper that tells new consumers of the product.
a. Print and Graphics Media b. Transit Advertising
b. Social Media/Online Selling d. Electronic Media
_______ 27. Promoting products to attract potential buyers by advertising on radio and television.
a. Promotional Gift b. Transit Advertising
b. Social Media/Online Selling d. Electronic Media
_______ 28. Which of the following cannot be recycled?
a. Milk cartons b. Plastic water bottle
c. Glass container d. Napkin
_______ 29. What material is best for making projects like memo pad, paper flower, photo frame and
basket?
a. wood b. paper
c. metal d. glass