Professional Documents
Culture Documents
Compliance Test Requirements - 15 - 3 - 2023, 1 - 05 - 17 PM
Compliance Test Requirements - 15 - 3 - 2023, 1 - 05 - 17 PM
Category 1
CATEGORY Furniture
faux leather
Standard Identifier Description Scope Notes / Test Method Pass Requirements Proof of Compliance
EN ISO 1421 TR00171 Rubber- or plastics-coated fabrics. rubber or plastic coated fabrics Longitudinal >200 Test report
Tensile strength Transverse > 140
EN ISO 2411 TR00187 Rubber or plastics-coated fabrics. rubber or plastic coated fabrics 25N Test report
Determination of coating adhesion
EN ISO 4674-1 TR00198 Rubber- or plastic- Coated fabrics. rubber or plastic coated fabrics Constant rate of tear methods 31N Test report
Determination of tear resistance.
EN ISO 7854 TR00203 Coated fabrics. Flex test rubber or plastic coated fabrics EN ISO 7854 / SATRA TM 25 - will Flex cracking cycles 150,000 min Test report
accept both test methods. Applies to Ageing (PU only) - after exposure to
rubber or plastic coated fabrics will 95%rh and 70°C for 36 hrs 150,000
accept either test method, it is not min and attainment of min coating
necessary to do both tests adhesion
All of the following documents, where applicable to your product, must also be included in the Technical File,
using the appropriate identifier listed below in the filename
General Documents
Standard Identifier Description Notes Applies To
Green Seal Appraisal Form GREEN ALL
Stage
Gold Seal Appraisal Form Stage GOLD ALL
Document generated on 15-03-2023 07:35
Page 6 of 7
Exploded Diagram ED ALL
Critical Control Points CCP ALL
Accreditatations AC ALL
Technical Drawings TD ALL
Risk Assessment RA ALL
Rating Label RL ALL
Bill of Materials BOM ALL
Instruction Manual IM ALL
Quality Control Points QCP ALL
Artwork AW ALL
Circuit Diagram CD ALL