Professional Documents
Culture Documents
75 Idle Adjust
75 Idle Adjust
RUNNING QUALITY ADJUSTMENT 2. Remove fuel bowl and gasket and check float lev-
el using a carburetor scale (gasket removed).
1. Position outboard at level trim. With gear case
submerged, start outboard and allow to warm up.
Throttle outboard back to idle for about one min- a
ute.
2. Shift outboard into forward gear. Turn low speed
mixture “in” (clockwise) until outboard starts to
bog down and misfire. Turn mixture screw out 1/4
turn or more.
52372
a
3. Attach Spring Clip on Inlet Needle to metal float
tab and place needle into its seat.
a
b
53422 55883
3 Cylinder Models a - Metal Float Tab
b - Spring Clip
a