Professional Documents
Culture Documents
2598 8430 DS Sp2230a 1 - 1D
2598 8430 DS Sp2230a 1 - 1D
The dust collector will connect to the end of the vent line from the top of brine maker silo to capture
solid sodium chloride dust when we transfer sodium chloride salt from the super sack into the silo
pneumatically.
The dust collector will consist of a dust filter / bag housing and a filter bag.
1. The dust filter / bag housing is protecting the dust filter bag from rain, snow, and sunlight.
2. The dust filter / bag will capture solid sodium chloride dust.
Supply List
Specification
Corrosive Yes
Air design flowrate Air design flowrate to dust collector will be based on 900
Nm3/h, to be confirmed as per final pneumatic blower design
capacity.
Dust content in air Dust content in air to dust collector is assumed as 1%wt of air
feed rate.
2598-8430-DS-SP2230A-1
DATASHEET FOR DUST COLLECTOR
DATASHEET
OF BRINE MAKER SILO Rev 1D
Page: 2 of 5
Particle size of dust in air feed Average size of salt dust particle in air is about 0.6 microns and
rate the maximum size of salt dust particle in air is about 1.7
microns.
2598-8430-DS-SP2230A-1
DATASHEET FOR DUST COLLECTOR
DATASHEET
OF BRINE MAKER SILO Rev 1D
Page: 3 of 5
Appendix – 1
2598-8430-DS-SP2230A-1
DATASHEET FOR DUST COLLECTOR
DATASHEET
OF BRINE MAKER SILO Rev 1D
Page: 4 of 5
Appendix – 2
Note : Dimension as specify in DWG. are preliminary sketch. However, the final dimension design
shall be advised by vendor.
2598-8430-DS-SP2230A-1
DATASHEET FOR DUST COLLECTOR
DATASHEET
OF BRINE MAKER SILO Rev 1D
Page: 5 of 5