Professional Documents
Culture Documents
Background
When a machine get high temperature warning from either the water cooler side or intercooler side, or when a
machine does not get the right power the reason could be that the pwm2601, 2602 for the fan control speed has
dirt inside the spool and behind the small cross-hole, Regulator valve will then have malfunction.
Action
Check the pressure / rpm for the fan pumps according to the Service Manual. If the fan pressure/rpm is low
remove the plug (1) and pull out the spool (2) clean spool and regulator with compressed air. Check the pressure
/ rpm and if necessary adjust the regulator
1.plug
N:\Department\CST Parts & Service Product Support\Service Tips\2. Engine\263-005 Fan pwm.doc Printed: 05-
09-26 13:49