Professional Documents
Culture Documents
Design Challenge 1 Year 8 Urban Heat Map Activity Student Sheet 1
Design Challenge 1 Year 8 Urban Heat Map Activity Student Sheet 1
Part 2
You now need to design some green space areas to add to your section. You will need to determine the
dimensions of these shapes, so the total area adds up to the 30% increased green space area of your section.
Choose one of the options below: (Please use the space provided)
C B A
At least one of each of the At least one of each of the 1. At least one composite
following shapes: following shapes: shape that consisting of:
Square and Rectangle Square/Rectangle Quadrilateral
Triangle Triangle Triangles
Circle Circle/Semi Circle Semi-Circle/ Quadrant
Parallelogram 2. Also must include at least
Rhombus one of each of the
Kite following connected as a
Parallelogram
Rhombus
Kite
All working must be shown All working must be shown All working must be shown
Part 3:
Using the shapes from Part 2, you need to put those shapes on the map in the locations you have allocated. These
shapes need to be put on the map to scale. Use the scale marker on the map as a guide for shape size. (Insert the
section of your map with your new green space area shapes here.) Making sure your shapes are to scale.
` ````
Part 4
Justify the locations of your new green space locations. Why have you decided to put the new green spaces where
you have? Have you thought about, houses, roads and the locations of current green spaces?
In area 1 there is housing but it is not vertical, so I got rid of it and put vertical housing around shapes 2,3 and 4.
The area around 2, 3 and 4 were not vertical housing so I knocked that down put a park in the middle and vertical
housing around it to accommodate for the loss of the other house’s. In area 5 and 6 the ground around was dry
land but I only used a little bit of it because it is private land so that the government doesn’t need to buy much, in
total I got 31,250% added greenspace which leaves this area 34,7% green space.