You are on page 1of 8

LEGACY

BOREHOLES
COMPANY
PROFILE
ABOUT THE COMPANY

The company mainly focuses on water and agric

service.

Siting
Drilling
Pumps installation
Gardens and greenhouses
Irrigation
Civil works .
Rehabilitation of agriculture stuctures .i.e dams ,water

resivours .diptanks etc


Wash and sanitation
SERVICES

SURVEYING,

DRILLING AND

CASING OF

BOREHOLES AND

SOLAR PUMP

INSTALLATION

Detailed design of the piped water schemes including


as built drawings (AutoCAD drawn)

 Detailed reports for capacity testing.

 Topographical survey map of the piped water


scheme.

 Capacity building of operators and technical


government stakeholders such as DDF water
technicians and rural district council engineers.

 Lifecycle Costing of the piped water scheme for


Operation and Maintenance (O and M).Training
Manual

THE COMPANY USES THE

FOLLOWING SAZ STANDARDS

FOR ALL IT'S DRILLING SERVICES

SAZS 678; Part 02; 2009 – The location

and siting of water boreholes

SAZS 678; Part 03; 2009 – The design,

construction, and drilling of boreholes

SAZS 678; Part 04; 2013 – Pumping

Test of water wells or boreholes

SAZS 678; Part 05; 2013- The design,


selection, and performance of pumping

equipment for production wells or


boreholes
DRILLING METHODS

Rotary-percussion Drilling

In very hard rocks, such as granite, the only


way to drill a hole is

to pulverize the rock, using a rapid-action


pneumatic hammer, often known

as a 'down-the-hole hammer'

(DTH). Compressed air is needed to drive this


tool. The air also flushes

the cuttings and dust from the borehole.


Rotation of 10-30 rpm ensures

that the borehole is straight, and circular in


cross-section
Rotary drilling with flush

Method: A drill-pipe and bit are


rotated to cut the rock. Air, water, or

drilling mud is pumped down the


drill-pipe to flush out the debris. The

velocity of the flush in the borehole


annulus must be sufficient to lift the

cuttings.

At legacy we are proud to say we


have the two common methods in

Zimbabwe that is rotary air and mud


drilling.
OUR ACTIVITY
OUR TEAM

DIRECTORS

RONALD HILLMAN
CHIDOCHASHE HILLMAN

HEAD OF SOLAR
HEADS OF DEPARTMENT:

AND
HEAD OF SOLAR AND

MECHANISATION MECHANISATION

DANNY HILLMAN ENGINEER CHITSA

HEADS OF CIVIL

WORKS

ENGINEER COLLEN
COMPANY CONTACT

263(0)773 653 673,


+263(0)719 653 673

www.legacyboreholes.com

info@legacyboreholes.com
legacyboreholes@gmail.com

102 Nigel Phillips,

Eastlea, Harare

You might also like