Professional Documents
Culture Documents
10 - Waterstops
11 - Other products
12 - Material properties
Issue 02/2017
Official supplier of expansion joints
WHO ARE WE ?
A s a building joints specialist, we have developed a know-how recognized by all professionals: architects, engineers,
consultants, general contractors and subcontractors.
We design, manufacture and market a full range of standard and seismic joints: joint covers, expansion joints, control
joints, firestop systems, stair nosings, etc.
►Clip affixed joint covers are manufactured ► VEDAFEU C© Rope ►All-metal type or with flexible rubber
in aluminium, PVC and brass. They are available For joint widths up to 150 mm. insert, suitable for horizontal and vertical
in any RAL colour and also in wood, gold, silver, applications. We provide a wide range,
bronze and brass aspects. ►VEDAFEU M© Mattress adapted to all types of public or private
For joint widths up to 450 mm. buildings, factories, shops, offices...
►Drilled and countersunk extruded joint
covers are produced for floors, walls and ►VEDAFEU N© Blanket
For joint widths up to 840 mm. ►At the cutting edge of innovation we
facades for gaps up to 320 mm wide.
always develop new products, amongst
►Folded joint covers are available in stainless ►VEDAFEU FB© Filler board which an extra-large seismic joint, for joint
steel, galvanized steel or aluminium (mill finish, For joint widths up to 100 mm. widths up to 280 mm, specifically created for
anodized or powder coated). flexible floors for hospitals, daycare centres
►Compression profiles are designed to close ►VEDAFEU PU© Foam
and schools.
expansion joints up to 100 mm wide. For joint widths up to 40 mm.
w
ww
u r w e b s i t e
V i s i t o e . c o m
e d a f r a n c
www.v
GV2
GV2 - VEDA
- VEDA FRANCE FRANCE - CS 63052 - 95972 Roissy
Tél : + 33 (0)1 CDG
48 61Cedex
70 80 - France
20, Allée des Erables
Tél : +- Bât.
33 E(0)1
- 93420 Villepinte
48 61 70 80 - Fax : +Fax
- France 33: +(0)1
33 (0)1
4848616170
7081
81
Adresse Postale E-mail : contact@vedafrance.com
Web : www.vedafrance.com - E-mail : export@vedafrance.com
CS 63052 - 95972 Roissy CDG Cedex Web : www.vedafrance.com
Range of products Clips affixed joint covers
Attractive and low cost solution for protecting and concealing flat and angle structural joints.
Joint covers :
- clips affixed
- drilled and countersunk
- folded
- adhesive affixed
Compression profiles
Control joints :
- bed affixed
- adhesive affixed
Stair nosings
Drilled and countersunk joint cover Structural movement joint
Metal and flexible insert
Safety antislip tapes
Other products
Compression profiles
VEDAPLAQUE Cardboard formwork
Presentation
The clips affixed joint covers are
designed to provide an attractive
and decorative low cost solution
to the problem of protecting and
concealing expansion joints in
the structure of a building.
The extruded PVC clips affixed joint covers can be used for exteriors and
interiors. The colours white RAL 9016, cream RAL 1015 and grey RAL
RAL color chart
3. Push firmly into joint 7035 are available from stock in 3 meter lengths in 50, 70 and 90 mm
wide, flat and angle models.
Please contact us for any special model or colour.
Extruded brass
The extruded brass clips affixed joint covers are available from stock in
3 meter lengths in 90 mm wide, flat model only. Polishing can be made
upon request.
4. Joint cover in place
© All rights reserved - Non contractual drawings - 02/2017
The choice of the clip model will be based on the initial joint width.
Clip XL *: for structural Special models can be studied and manufactured for specific situations such as chamfered joints.
gaps varying in width Please consult our technical department for more details.
from 60 to 110 mm.
* Patented models Galvanized steel, mill finish aluminium, powder coated aluminium, anodized aluminium, stainless steel.
For facades, floors, walls and ceilings in thickness from 10/10e to 30/10e mm.
Release paper
W
W
* Patented models
Initial joint width Flat joint cover Angle joint cover Number of clips per 3 lm length
Recommended clip
W [mm] S [mm] S [mm] Wall / Ceiling [CJV] Floor [CJH]
10 - 35 CJV - CJH 050 CJV - CJH 050 A S 4 10
20 - 40 CJV - CJHL 060 CJV - CJH 060 A S / SLL 4 10
35 - 50 CJV - CJHL 070 CJV - CJH 070 A S / SLL 4 10
40 - 70 CJV - CJH 090 CJV - CJH 090 A SLL / XL 4 10
60 - 90 CJV - CJH 120 CJV - CJH 120 A SLL / XL 4 10
90 - 110 CJV - CJH 140 - XL 4/5 10
100 - 130 CJV - CJH 180 - XL / XXL 4/5 10
120 - 150 CJV - CJH 210 - XXL 4/5 10
Note : The above table indicates the minimum width of joint cover (S dimension) recommended according to the initial width of the structural gap (W). For example, a 70 mm joint
cover is recommended to cover a structural gap of 35-50 mm. Of course, a joint cover wider than 70 mm ( 90, 120, 140, 180 or 210 mm) can also be used.
In order to avoid possible mistakes, it is important to check that the selected models of joint covers and clips are adapted to the concerned situation on job site.
W W
Initial joint width Flat joint cover Angle joint cover Number of clips per 3 lm length
Recommended clip
W [mm] S [mm] S [mm] Wall / Ceiling Floor
10 - 35 CJV - CJH 050 CJV - CJH 050 A S 5 10
35 - 50 CJV - CJH 070 CJV - CJH 070 A S / SLL 5 10
40 - 70 CJV - CJH 090 CJV - CJH 090 A SLL / XL 5 10
60 - 120 CJV - CJH 150 - SLL / XL / XXL 5 10
The colours white RAL 9016, cream RAL 1015 and grey RAL 7035 are available from stock in 3 meter lengths in 50, 70 and 90 mm wide, flat
and angle models. In order to avoid possible mistakes, it is important to check that the selected models of joint covers and clips are adapted
to the concerned situation on job site
CERTIFICATIONS :
PVC : manufactured in compliance with ISO 9001
Stainless steel clips : certifications ISO 14001 - ISO/TS 16949 - ISO 9001
© All rights reserved - Non contractual drawings - 02/2017
Series CJE - PF
Les couvre joints CJE-PF sont conçus pour protéger et habiller les
joints de façades, murs, plafonds et sols. Esthétiques, décoratifs et
économiques, ils peuvent être utilisés à l’intérieur ou à l’extérieur.
Pré-percés et fraisés, ils sont faciles à installer, et sont utilisés en
travaux neufs et en rénovation pour des joints de 10 à 200 mm.
Ils peuvent être installés dans tous types de bâtiments : centres
commerciaux, aéroports, gares, immeubles de bureaux ou
d’habitation, hôpitaux, galeries marchandes, écoles, super et
hypermarchés, hôtels, bâtiments municipaux, centres de loisirs,
usines, etc.
This range of joint covers is designed to provide an attractive and decorative low cost solution to the problem of protecting
and concealing expansion joints in the structure of a building. Drilled and countersunk, they are suitable for use in new or
refurbishment projects for walls, ceilings and floors, for gaps up to 200 mm.
They can be installed in all types of buildings : office buildings, shopping malls and retail stores, schools, hospitals, hotels,
blocks of flats, municipal buildings, leisure centres, factories, airport terminals, rail terminals, etc...
Mousse amortissante
Adhesive foam
W Mousse amortissante / Adhesive foam
(1) Similaire aux couvre joints à clipser - Similar to clip affixed joint covers
(2) Bords biseautés - Beveled edges
Options possibles : Anodisation, laquage, mousse amortissante adhésive Vedalen Options : Anodizing, powder coating, Vedalen adhesive foam
Fixations possibles : Vis et chevilles (nous consulter pour préconisation) Installation : Using screws and plugs (please contact us)
Scellement chimique VED POXY. VED POXY pure epoxy chemical sealing.
Series CJP
The range of folded joint covers is designed to provide an
attractive and decorative low cost solution to the problem of
protecting and concealing expansion joints in the structure
of a building.
They are suitable for use in new or refurbishment projects
for walls, ceilings and floors, for gaps up to 500 mm.
They are available in aluminium, galvanized or stainless
steel and brass and can be installed in all types of buildings :
office buildings, shopping malls and retail stores, schools,
hospitals, hotels, blocks of flats, municipal buildings, leisure
centres, factories, airport terminals, rail terminals...
Finishings : Installation :
Mill finish aluminium Bonding : silicon sealant, polyuréthane, MS polymer
Anodized aluminium Screws and plugs (contact us for specifications)
Powder coated aluminium (RAL colours) VED POXY chemical sealing
Galvanized steel
304 or 316 stainless steel Available thicknesses :
Brass From 10/10e
© All rights reserved - Non contractual drawings - 02/2017
W W
Standard drilling :
Drilled on one side every 400 mm, first and last hole at 10 cm from each ends, i.e 7 holes per length of 3 meters. Drilling
diameter 8 mm, countersunk 10 mm.
Special drillings :
Drilled on both sides, one standard hole on one side and one oblong hole on the other side in order to guide and to secure
the joint during its movement.
Drilled on both sides, oblong holes.
Drilled, countersunk one side Drilled, countersunk round hole one side, oblong hole on the other side
Series PSO
Présentation
Profilés souples à encastrer (pouvant être collés)
pour la réalisation rapide et économique de joints
verticaux et horizontaux, extérieurs ou intérieurs.
Presentation
Compression profile (to be glued or not) for easy
and economical sealing of vertical and horizontal,
indoor and outdoor joints.
Ref. PSO PSO 010 PSO 020 PSO 025 PSO 030 PSO 040 PSO 050 PSO 060 PSO 070 PSO 080 PSO 120
W [mm] mini / maxi 7 - 12 12 - 17 17 - 21 20 - 24 25 - 34 35 - 44 45 - 54 55 - 64 65 - 70 80 - 100
H [mm] hauteur / Depth 20 20 27 28 38 45 55 60 70 80
S [mm] largeur / Width 15 20 25 30 40 50 60 70 80 120
Caractéristiques :
Les profilés PSO et PSR standards sont fabriqués selon la norme DIN 18541, caractérisée par un allongement à la rupture supérieur à 350 %,
une excellente résistance aux agents chimiques et au vieillissement et une élasticité permanente comparable à celle du caoutchouc.
Characteristics :
PSO and PSR compression profiles are manufacturated according to the DIN 18541 standard : elongation at break > 350 %, excellent
resistance to chemicals and to ageing and permanent elasticity equivalent to that of natural rubber.
Series PSR
Utilisation
En fonction de conditions particulières d’utilisation
telles que résistance aux huiles et bitume, sollicitations
importantes avec températures extrêmes, risque
d’incendie, innocuité physiologique, les profilés PSO
et PSR peuvent être fabriqués à partir de matières
premières spécifiques selon DIN 7865, ASTM D638,
ASTM D746.
PSR 030
Conditions of use
Depending on conditions of use such as resistance to oils
and bitumen, large movements at extreme temperatures,
fire resistance, physiological harmlessness, the PSO and
PSR profiles can be manufactured from selected raw
materials according to DIN 7865, ASTM D638 and ASTM PSR 015/020/025/030/035/040/050/055/060/090
D746.
PSR PSR PSR PSR PSR PSR PSR PSR PSR PSR PSR PSR A 35 PSR A 60
Réf. PSR
010 015 020 025 030 035 040 050 055 060 090 angle angle
W [mm] mini / maxi 7 - 12 9 - 15 13 - 17 17 - 22 19 - 25 19 - 25 20 - 35 25 - 34 24-29 25 - 30 35 - 42 19 - 25 25 - 30
H [mm] hauteur / Depth 20 20 25 30 35 35 40 40 45 50 60 35 50
S [mm] largeur / Width 17 20 25 30 50 35 60 50 55 60 90 40 90
Matériau / Material Nitrile
Couleur / Color Noir, gris / Black, grey
Longueur standard [ml] /
Rouleau de 25 / Roll of 25
Standard Length [lm]
Autres coloris sur demande. Other colors upon request.
© All rights reserved - Non contractual drawings - 02/2017
BLANKET
CLASSIFICATION REPORTS
MOVEMENT
PERFORMANCE
Bureau Veritas Certification France certifiy that the Management System of the above
organization has been audited and found to be in accordance with the requirements of the
management system standard detailed below
Standard
ISO 9001:2015
Scope of certification
Further clarifications regarding the scope of this certificate the applicability of the
management system requirements may be obtained by consulting the organization.
To check this certificate validity, please call + 33(0) 1 41 97 00 60.
A s a building joints specialist, we have developed a know-how recognized by all professionals: architects, engineers,
consultants, general contractors and subcontractors.
We design, manufacture and market a full range of standard and seismic joints: joint covers, expansion joints, control
joints, firestop systems, stair nosings, etc.
►Clip affixed joint covers are manufactured in ► VEDAFEU C© Rope ►All-metal type or with flexible rubber
aluminium, PVC and brass. They are available For joint widths up to 150 mm. insert, suitable for horizontal and vertical
in any RAL colour and also in wood, gold, silver, applications. We provide a wide range,
bronze and brass aspects. ►VEDAFEU M© Mattress adapted to all types of public or private
For joint widths up to 450 mm. buildings, factories, shops, offices...
►Drilled and countersunk extruded joint
covers are produced for floors, walls and ►VEDAFEU N© Blanket
For joint widths up to 840 mm. ►At the cutting edge of innovation we
facades for gaps up to 320 mm wide.
always develop new products, amongst
►Folded joint covers are available in stainless ►VEDAFEU FB© Filler board which an extra-large seismic joint, for joint
steel, galvanized steel or aluminium (mill finish, For joint widths up to 100 mm. widths up to 280 mm, specifically created for
anodized or powder coated). flexible floors for hospitals, daycare centres
►Compression profiles are designed to close ►VEDAFEU PU© Foam
and schools.
expansion joints up to 100 mm wide. For joint widths up to 40 mm.
w
ww
VEDAFEU STRENGTHS 09
10 EUROPEAN REGULATIONS
INTERNATIONAL APPROVALS 11
12 HOW TO READ A
CLASSIFICATION REPORT ?
VEDAFEU C© ROPE 14
18 NAPPES VEDAFEU
VEDAFEU N
M© MATTRESS
VEDAFEU N© BLANKET 20
22 VEDAFEU FB© FILLER BOARD
CAUSES OF MOVEMENT
Environment
(wind, train vibration...)
© All rights reserved - Non contractual drawings - 02/2017
Earthquakes
7
EXPANSION JOINTS AND
FIRESTOP LOCATIONS
1
3
2
7
6
‘‘
1 – Joint de passerelle
u - Linking bridge
2 – Joint entre plancher et mur rideau
v - Curtain wall
3 – Joint de façade extérieure
wtoiture
4 – Joint de - Facade
5 – Joint étanche circulable
x - Roof
6 – Joint en tête de maçonnerie
y - Driveway
7 – Joint pour charges lourdes
z - Head of wall
- Loading bay
‘‘
A solution to any configuration
VEDAFEU RANGE
10 120 144
RESULTS
©
VEDAFEU C Rope
Joint width (mm)
40 100 300 450 Movement (mm)
©
VEDAFEU M Mattress
RECOMMENDATIONS
0 10
‘‘
VEDAFEU C Rope
©
120
©
VEDAFEU M Mattress
450
©
VEDAFEU N Blanket
‘‘
VEDAFEU FB© filler board and VEDAFEU PU© foam are not shown in this chart due to their specific use
COMPRESSIBILITY up to 95%
Fire resistance classification for special building components and systems. This standard details the test
procedures : position of the samples, movement capacity, junction types, joint width, etc.
European Test Method Standard EN 1366-4 (Novembre 2006) + A1 extension (June 2010)
Fire resistance testing of construction systems, part 4 : Expansion joint fillers. This standard details a test
method for fire-resistant joint filler according to their final use, with or without movement during the
tests. This standard was approved by the CEN (European Committee for Standardization) in April 2006.
‘‘ All our fire resistance tests were made at CSTB and Efectis France,
two of the leading official Laboratories in Europe.
‘‘
Complying with the latest standards is
making sure everyone stays safe
ﺇﺩﺍﺭﺓ ﺍﻟﻮﻗﺎﻳﺔ
TECHNICAL REPO
RT
PRODUCT :
Gap Seals, Penet
ration seals, Smoke ﺍﻟﺘﻘﺮﻳﺮ ﺍﻟﻔﻨﻲ
PRODUCT APPL Putty, Wraps, sealan seals, Fire pillows,
ICATION : ts etc.
Fire Rated and Retard : ﺍﻟﻤﻨﺘﺞ
APPLICANT / P.O ant materials
.Box : ﺗﺼﻨﻴﻒ ﺍﻟﻤﻌﺪﺓ
MANUFACTURER ﺍﻟﻤﻨﺎﺯﻝ ﺍﻟﻘﻄﺮﻳﺔ ﻟﻠﺘﻄﻮﻳﺮ
/
LOCATION : GV2 INTERNATIO : ﻣﻘﺪﻡ ﺍﻟﻄﻠﺐ
NAL VEDA FRAN
CE / FRANCE
PRODUCT / MOD : ﺑﻠﺪ ﺍﻟﺼﻨﻊ/ ﺍﻟﺸﺮﻛﺔ ﺍﻟﻤﺼﻨﻌﺔ
EL :
ﺍﻟﻮﺻﻒ
Fire Barrier Backe ﺍﻟﻤﻮﺩﻳﻞ : ﻗﺎﺋﻤﺔ ﺍﻟﻤﻨﺘﺠﺎﺕ
r Rods
System consists
of
and rotproof minera a core of fireproof VEDAFEU C
l an outer braidin
fiberglass thread g of
.
3RD PARTY
CERTIFICATE /
APPROVAL : EFR-15-003538
- EFR-1501-0008
- EFECTIS ﺷﻬﺎﺩﺓ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ ﺍﻟﻤﺴﺎﻧﺪﺓ
RECOMMENDAT : ( )ﻣﻦ ﻫﻴﺌﺎﺕ ﻣﻌﺘﻤﺪﺓ
IONS
/ﻉ
Page 2 of 2
itters
Underwtrories Civil Defense Civil Defense
Labora United Arab Emirates Qatar
BS 476
Part 20
Understanding a classification
EXAMPLE
Failed after Tested
60 minutes WITHOUT
ONLY MOVEMENT
E 60 - H - X - F - W 60
VALID for a
NO «I» HORIZONTAL gap of 60 mm
NO THERMAL SUPPORT ONLY.
INSULATION ONLY Not valid for
a range
+ = EI
E = Smoke, gas and I = thermal EI classification.
firestop insulation
Exposure to fire
A test carried out from
Firestop not Fire the non exposed
exposed to fire exposed to fire
side to fire
does not validate
a configuration
exposed to fire.
‘‘
VEDAFEU C ROPE ©
‘‘
The most
extensive range in
firestop systems
POSITIONS
Tested and certified for
horizontal and vertical applications. Horizontal position
Vertical position
EXPOSURE
Tested and certified
not exposed or exposed to fire.
Not exposed to fire Exposed to fire
COMPRESSIBILITY
Tested and certified up to - 80% compression.
Initial joint With compression
EXPANSION MOVEMENT
Tested and certified up to + 20% expansion.
Initial joint With movement
APPLICATIONS
Hospitals, industrial buildings, offices, housing, hotels,
malls, carparks, schools, train stations, airports, stadiums, etc.
Other VEDAFEU C ropes ø : 20, 40, 50, 70, 80, 100 and 170 mm.
©
A colour system has been thought to easily identify different diameters and prevent misuse.
©
VEDAFEU C has also been tested and approved with movement of +7,5% with lower compression rate.
CERTIFIED CONFIGURATIONS
ED ED
CERTIFI CERTIFI
NO WITH
sealant joint
NO cover
joint NO
cover sealant
ED ED
CERTIFI CERTIFI
WITH WITH
waterproofing
sealant
NO membrane
joint NO
cover joint cover
©
VEDAFEU C PROPERTIES
VEDAFEU C© firestop rope COMPRESSIBILITY tests
Immediate After 2 hours After 72 hours
Load F (kN) and
Ref. Test Compressibility form form form
VEDAFEU C©
recovery recovery recovery
1 F = 4 kN 69 % 83 % 88 % 90 %
VEDAFEU C©
2 F = 50 kN 83% 78 % 84 % 86 %
Ø 60
3 F = 5 kN 70% 76 % 87 % 91 %
AVERAGE 74% 79 % 86 % 89 %
1 F = 30 kN 81% 55 % 69 % 74 %
VEDAFEU C©
2 F = 30 kN 80% 62 % 69 % 71 %
Ø 100
3 F = 30 kN 85 % 57 % 62 % 63 %
AVERAGE 82 % 58 % 67 % 69 %
1 F = 100 kN 86 % 54 % 55 % 72 %
VEDAFEU C©
2 F = 100 kN 88 % 56 % 57 % 67 %
Ø 150
3 F = 100 kN 88 % 68 % 71 % 81 %
AVERAGE 87 % 59 % 61 % 73 %
The thermal value (Lambda) of VEDAFEU C© firestop rope is about 0.040 W/mK at 20°C.
Results of test report n° RA.15.36.EB-V2 dated 25/10/2015 (available upon request).
*
Apply a layer of VEDACOLLE While the adhesive is still wet, Linking of 2 lengths VEDAFEU C © with junction.
adhesive with a brush on both sides insert VEDAFEU C © by hands into (patented).
of the joint. the joint.
EXAMPLES OF APPLICATION
j Expansion joint
k Head of wall
Application on floor, wall, ceiling with junctions. A single rope Double rope
l Curtain wall
m Other possible
applications
‘‘
Solutions for standard
or seismic joints
TESTed d
certifi
e VEDAFEU M© MATTRESS STRENGTHS
POSITIONS
Tested and certified for
horizontal and vertical applications. Horizontal position Vertical position
COMPRESSIBILITY
Tested and certified up to - 95%.
Initial joint With compression
EXPANSION MOVEMENT
Tested and certified up to + 50%.
Initial joint With movement
APPLICATIONS
Hospitals, industrial buildings, offices, housing, hotels,
malls, carparks, schools, train stations, airports, stadiums, etc.
Apply the glue on both sides of the joint Apply the glue on the underside of the wings Insert the mattress into the joint.
and on a width of 5 cm on the upper side and on the vertical side of the mattress
of the concrete slab. on a width of 6 cm.
Fix the wings of the mattress to the slab Mattress after installation. Application on floor and wall with junctions.
every 20 cm using a pneumatic nailer.
100%
PATENTED
‘‘
Veda France, always
ahead in terms of fire
protection
TESTed d
certifi
e VEDAFEU N© BLANKET STRENGTHS
COMPRESSIBILITY
Tested and certified up to - 75% compression.
Initial joint With compression
EXPANSION MOVEMENT
Tested and certified up to + 50% expansion.
Initial joint With movement
APPLICATIONS
Hospitals, industrial buildings, offices, housing, hotels,
malls, carparks, schools, train stations, airports, stadiums, etc.
©
VEDAFEU N BLANKET
Installation instructions for
joint width from 150 to 560 mm
Make sure that the joint edges Flatten the blanket against the Keep the pressure on the flange
©
VEDAFEU N blanket after
are straight and clean concrete with the flange. while fixing with pneumatic nailer. installation.
to get a good contact
between the blanket and
its supports.
‘‘
All-in-one PRODUCT :
formwork, fire barrier, acoustic
and thermal insulation 100%
PATENTED
COMPRESSIBILITY
Tested and certified up to - 60%.
initial joint With compression
EXPANSION MOVEMENT
Tested and certified up to + 20%.
initial joint With movement
APPLICATIONS
Hospitals, industrial buildings, offices, housing, hotels,
malls, carparks, schools, train stations, airports, stadiums...
VERTICAL
Classification Report n° 13-F-131441 dated 16/04/2014
EI 240 – V – M20 – B – W 20 EI 240 – V – M7,5 – B – W 20 to 60
‘‘
‘‘
Firestop up to 4 hours from
a height of 140 mm
VEDAFEU FB© PROPERTIES
VEDAFEU FB© filler board COMPRESSIBILITY tests
Load F (kN) and Immediate After 2 hours
Ref. Test VEDAFEU FB© Compressibility form form
thickness Ec to F (mm) recovery recovery
1 F = 7.4 kN - Ec = 7 mm 64 % 88 % 96 %
2 F = 5.7 kN - Ec = 7 mm 67 % 82 % 91 %
VEDAFEU FB©
20 3 F = 8,4 kN - Ec = 6 mm 70 % 81 % 93 %
4 F = 9,0 kN - Ec = 8 mm 63 % 85 % 98 %
5 F = 8,8 kN - Ec = 7 mm 65 % 81 % 95 %
AVERAGE 66% 83 % 95 %
1 F = 11,1 kN - Ec = 17 mm 58 % 91 % 94 %
2 F = 11.4 kN - Ec = 18 mm 55 % 93 % 97 %
VEDAFEU FB©
3 F = 12.9 kN - Ec = 19 mm 54 % 92 % 95 %
40
4 F = 11,1 kN - Ec = 15 mm 60 % 92 % 98 %
5 F = 11,3 kN - Ec = 18 mm 55 % 91 % 94 %
AVERAGE 56 % 92 % 96 %
1 F = 8,0 kN - Ec = 25 mm 59 % 93 % 96 %
2 F = 6,7 kN - Ec = 22 mm 63 % 89 % 97 %
VEDAFEU FB©
3 F = 9,2 kN - Ec = 27 mm 55 % 93 % 97 %
60
4 F = 7.3 kN - Ec = 23 mm 62 % 89 % 98 %
5 F = 6,1 kN - Ec = 19 mm 68 % 88 % 97 %
AVERAGE 62 % 90 % 97 %
Results of test report n° EEM 13 26043939/A dated 25/02/2013 (available upon request).
v v
Side
A u
eA
Sid u
1. Attach the anchoring springs to the upper 2. Install the VEDAFEU FB© filler board along 3. Concrete slab sideupoured.
part of the VEDAFEU FB© filler board on the wooden formwork.
Side A according to the fig. 1.
100%
u PATENTED
Side B
v
v
4. Attach the anchoring springs to the lower 5. Concrete slab sidevpoured.
part of the VEDAFEU FB© filler boards on
Side B according to the fig. 2.
75
Fig. 1
300
‘‘ 300
Side
FaceA
1200
A
300 205
20
30
205
Fig. 2
300
1200
Side B
Face B
300 300 75
20
30
‘‘
Patented junction system.
No risk of gas or fire leak
‘‘ VEDAFEU PU EXPANDING FOAM ©
‘‘
The quickest and easiest
firestop solution
EI 240 – V – X – W 10 to 20
EI 180 – V – X – W 10 to 30
EI 120 – V – X – W 10 to 40
TECHNICAL DATA
Volume Approx 30 L (free foamed), can of 750 ml
Density 24 kg/m3
Tack free time 10 - 15 min 18°C/60% RH
Cutting time 1 hour ø=3 cm, 18°C/60% RH
Hardening time 24 hours
Thermal conductivity 0,029 W/(m K) at 20°C DIN 52612
Fire reaction B s1 d0 EN 13501-1
JDV 4.02
S=B
W
Plat Flat
Ref. JDV 4.02 4.02-040 4.02-050 4.02-060 4.02-080 4.02-100 4.02-120 4.02-150 4.02-180 4.02-200
Autres ouvertures et mouvements sur demande / Additional gaps and movements upon request.
JDV 4.02 A
S
B
W
Angle Angle
Ref. JDV 4.02 A 4.02-040 A 4.02-050 A 4.02-060 A 4.02-080 A 4.02-100 A 4.02-120 A 4.02-150 A 4.02-180 A 4.02-200 A
Autres ouvertures et mouvements sur demande / Additional gaps and movements upon request.
© All rights reserved - Non contractual drawings - 06/2017
JDV 4.04 A
JDV 4.04
S
H
W
B
Plat Flat
Angle Angle
JDV 4.06 A
Angle Angle
JDV 4.06 I
JDV 4.06
S
W
Plat Flat Plat Flat
Cornières apparentes, fixation mécanique Cornières invisibles collées ou fixées mécaniquement avec insert lisse
Visible aluminium side plates, mechanical attachment Invisibly glued or mechanically fixed aluminium side plates with smooth insert
Ref. JDV 4.06 4.06-030 4.06-050 4.06-080 4.06-120 4.06-200 4.06-280 4.06-350
W [mm] ouverture / Gap up to 30 50 80 120 200 280 350
H [mm] hauteur / Depth 15
S [mm] approx. 120 140 170 210 290 370 440
Mouvement admissible M [mm]
+8 / -2 +20 / -10 +30 / -15 +45 / -20 +50 / -40 +80 / -45 +100 / -50
Accomodation of movement M [mm]
Couleur de l’insert / Insert color Noir, gris / Black, grey, Insert lisse sur demande / Smooth insert upon request
Matériau / Material Nitrile, aluminium / Nitrile, aluminium
Longueur standard [ml]
4
Standard length [lm]
© All rights reserved - Non contractual drawings - 07/2017
W
Plat Flat Angle Angle
W W
Plat Flat Angle Angle
Ref. JDV 4.10 4.10-050 4.10-050 A 4.10-100 4.10-100 A 4.10-150 4.10-150 A 4.10-200 4.10-200 A
S [mm] approx. 170 110 220 160 270 210 320 260
Mouvement admissible M [mm]
+25 / -25 +50 / -50 +75 / -75 +100 / -100
Accomodation of movement M [mm]
Matériau / Material Aluminium / Aluminium
Longueur standard [ml]
3
Standard length [lm]
H
S H
Plat Flat
S
Angle Angle
Ref. JDV 4.12 4.12-050 4.12-050 A 4.12-100 4.12-100 A 4.12-150 4.12-150 A 4.12-200 4.12-200 A
S [mm] approx. 170 110 220 160 270 210 320 260
Mouvement admissible M [mm]
+25 / -25 +50 / -50 +75 / -75 +100 / -100
Accomodation of movement M [mm]
Matériau / Material Aluminium / Aluminium
Longueur standard [ml]
3
Standard length [lm]
JDV 4.14 A
JDV 4.14 W
S
Plat Flat Angle Angle
W
B
Sol / sol Floor to floor Sol / mur Floor to wall
W
B
Sol / sol Floor to floor Sol / mur Floor / wall
31 kN
W
B
Sol / sol Floor to floor Sol / mur Floor to wall
B [mm] approx. 205 / 225* 225 / 245* 260 / 285* 285 / 305* 320
S [mm] approx. 135 135 170 200 230
Mouvement admissible M [mm]
+15 / -5 +15 / -5 +20 / -10 +25 / -15 +20/ -20
Accomodation of movement M [mm]
Couleur / Color Noir, gris / Black, grey
Matériau / Material Aluminium, nitrile Aluminium, PVC, nitrile / Aluminium, PVC, nitrile
Longueur standard [ml]
4
Standard length [lm]
Charge [kN]
Load-bearing capacity [kN]
JDH 5.08
S
B
Sol / sol Floor to floor
JDH 5.10
S
e
W
B
Sol / sol Floor to floor
JDH 5.12
W
Sol / sol Floor to floor
Ref. JDH 5.12 5.12-080 5.12-100 5.12-120 5.12-160 5.12-200 5.12-260 5.12-300
W [mm] ouverture / Gap up to [mm] 80 100 120 160 200 260 300
H [mm] hauteur / Depth [mm] 35 / 40* / 50 / 55 / 60 / 80 / 100 35 / 40* / 50 / 55* / 60 / 80 / 100
B [mm] approx. 185 [205*] 205 [225*] 225 [245*] 260 [280*] 330 [350*] 375 [395*] 430 [455*]
S [mm] approx. 100 120 140 170 240 280 320
Mouvement admissible M [mm]
+9 / -9 +12 / -12 +15 / -15 +25 / -15 +30 / -15 +35 / -15 +40 / -20
Accomodation of movement M [mm]
Couleur / Color Noir, gris / Black, grey
Matériau / Material Aluminium, nitrile / Aluminium, nitrile
Longueur standard [ml] / Standard length [lm] 4
Charge [kN]
31 kN
Existe en version sol/sol et sol/mur. Floor to floor and floor to wall profiles available.
with vinyl tiles (+3 mm) or carpet (+5 mm); profiles JDH 5.18
S
with brass or stainless steel capping are also L
available for a luxurious and aesthetical finishing,
or for use in food industry or hospitals ; profiles
with luxurious metal coverings for high class
projects (palaces, guest houses, hotels, etc.) can
also be supplied. Please refer to our technical
department. This range is particularly economical W
for extra large gaps.
B
COMPOSITION :
Profiles : depending on the expected traffic, profiles from Series JDH 5.02, will be installed for a standard use, Series
JDH 5.04 for a heavy traffic, JDH 5.50 or JDH 5.51 with brass or stainless steel capping for luxurious, industrial, or design
purpose. Profiles with side plates of a minimum height of 50 mm are recommended to ensure a good stability of the structure.
Heights of 65 or 80 mm will be preferred whenever possible.
The central supporting structure is supplied in aluminium. Its width and thickness will depend on the initial gap, the
expected movement and stress of the building. Bigger the gap is the thicker the central plate is. Refer to the table to make
sure to choose the right model.
MATERIALS :
Profiles : Extruded aluminium 6063 T6. In length of 4 meters.
Insert : Nitrile elastomer in rolls of 20 lm, available in black or grey. Other colors can be produced upon request, depending on
quantities.
• Nitrile properties: Elongation at break : ≥ 350 % ISO R 527-2 ; Tensile strength : ≥ 14N/mm² DIN 53504
• Fire resistance : B2 : self extinguishing
• Oils, bitumen, oxygen, acids and bases and micro organisms resistant.
Central supporting structure made of aluminium 20/10e or 30/10e thickness depending on the gap of the expansion joint.
© All rights reserved - Non contractual drawings - 02/2017
CLEANING :
Series JDH 5.18, when properly installed, does not require
any specific maintenance. The flexible insert can be easily
replaced if necessary.
Series JDH 5.18 A Angle - Floor to Wall
5.18 / 050-100 100 +14 / -14 +50 / -50 300 JDH 5.02-050 50 / 65 / 80 400 500
5.18 / 050-150 150 +14 / -14 +50 / -50 350 JDH 5.02-050 50 / 65 / 80 450 550
5.18 / 050-200 200 +14 / -14 +50 / -50 400 JDH 5.02-050 50 / 65 / 80 500 600
5.18 / 050-250 250 +14 / -14 +50 / -50 450 JDH 5.02-050 50 / 65 / 80 550 650
5.18 / 050-300 300 +14 / -14 +50 / -50 500 JDH 5.02-050 50 / 65 / 80 600 700
5.18 / 050-350 350 +14 / -14 +50 / -50 550 JDH 5.02-050 50 / 65 / 80 650 750
5.18 / 050-400 400 +14 / -14 +50 / -50 600 JDH 5.02-050 50 / 65 / 80 700 800
5.18 / 050-450 450 +14 / -14 +50 / -50 650 JDH 5.02-050 50 / 65 / 80 750 850
5.18 / 050-500 500 +14 / -14 +50 / -50 700 JDH 5.02-050 50 / 65 / 80 800 900
5.18 / 065-100 100 +20 / -20 +65 / -65 300 JDH 5.02-065 50 / 65 / 80 430 530
5.18 / 065-150 150 +20 / -20 +65 / -65 350 JDH 5.02-065 50 / 65 / 80 480 580
5.18 / 065-200 200 +20 / -20 +65 / -65 400 JDH 5.02-065 50 / 65 / 80 530 630
5.18 / 065-250 250 +20 / -20 +65 / -65 450 JDH 5.02-065 50 / 65 / 80 580 680
5.18 / 065-300 300 +20 / -20 +65 / -65 500 JDH 5.02-065 50 / 65 / 80 630 730
5.18 / 065-350 350 +20 / -20 +65 / -65 550 JDH 5.02-065 50 / 65 / 80 680 780
5.18 / 065-400 400 +20 / -20 +65 / -65 600 JDH 5.02-065 50 / 65 / 80 730 830
5.18 / 065-450 450 +20 / -20 +65 / -65 650 JDH 5.02-065 50 / 65 / 80 780 880
5.18 / 065-500 500 +20 / -20 +65 / -65 700 JDH 5.02-065 50 / 65 / 80 830 930
(*) Possible to use the reinforced Series JDH 5.04 Please refer to our technical department for specifications.
© All rights reserved - Non contractual drawings - 02/2017
JDH 5.20
S
H
Floor to floor
Suitable for pedestrian traffic (500 Kg on a 150 x 150 mm surface) as well as for light trolleys and stretchers.
The inserts are available in rolls of up to 30 meters.
Aluminium side plates are supplied in length of 2 meters.
The aluminium side plates are drilled : holes Ø 10 mm. For installation, use 7 mechanical or chemical fixings per meter
(1 every 30 cm), in staggered rows.
Ref. JDH 5.20 5.20-100 5.20-150 5.20-200 5.20-250 5.20-300 5.20-350 5.20-400
W [mm] Gap up to 100 150 200 250 300 350 400
H [mm] Depth 22
S [mm] approx. 250 300 350 400 450 500 550
Accomodation of movement M [mm] +16 / -16
Watertight floor expansion joint specially recommended for carparks. Stainless steel protection, very good resistance to intensive
car traffic. Very resistant to chemicals and petrol. Designed for multistorey and underground exterior and interior carparks, ramps,
podiums, pedestrian bridges, etc. Weldable insert.
JDH 5.22
S
W
B
JDH 5.22 JDH 5.24 with full stainless steel
protection
Ref. JDH 5.22 / 5.24 5.22-030 5.22-050 5.22-070 5.22-100 5.24-030 5.24-050 5.24-070
W [mm] ouverture / Gap up to 30 50 70 100 30 50 70
H [mm] hauteur / Depth 25 25 / 45 45 / 75 70 30 30 / 50 50 / 80
B [mm] approx. 190 220 220 470 190 220 220
S [mm] approx. 80 110 110 110 80 110 110
Mouvement admissible jusqu’à M [mm]
+15 / -15 +30 / -30 +40 / -40 +20 / -20 +15 / -15 +30 / -30 +40 / -40
Accomodation of movement up to M [mm]
Couleur de l’insert / Insert color Noir / Black
Matériau / Material Aluminium, inox, nitrile / Aluminium, stainless steel, nitrile
Longueur standard [ml] / Standard length [lm] 4
31 kN
46 kN
Charge [kN]
Load-bearing capacity [kN]
31 kN
120 kN 300 kN
JDH 5.26
S
W
Insert lisse +3 mm / +3 mm smooth insert Sol / sol Floor to floor Sol / mur Floor to wall
Ref. JDH 5.26 / 5.28 5.26-020 5.26-030 5.26-050 5.26-065 5.26-100 5.28-030 5.28-050 5.28-065
W [mm] ouverture / Gap up to [mm] 20 30 50 65 100 30 50 65
H [mm] hauteur / Depth [mm] 17 26 26 26 30 27 27 27
S [mm] approx. 120 150 175 185 220 150 175 185
Mouvement admissible M [mm]
+2,5 / -2,5 +5 / -5 +7 / -7 +10 / -10 +15 / -15 +5 / -5 +7 / -7 +10 / -10
Accomodation of movement M [mm]
Couleur de l’insert / Insert color Noir, gris* / Black, grey*
Matériau / Material Aluminium, nitrile / Aluminium, nitrile
Longueur standard [ml]
4
Standard length [lm]
Charge [kN]
31 kN
Watertight floor expansion joint for car parks and any other
places with or without traffic of slow vehicles. It is made of two
mill finish aluminium or galvanized steel or stainless steel side
plates or stainless steel and an interchangeable waterproofing
flexible insert.
JDH 5.30
S
W
Sol / sol Floor to floor Profilé souple étanche Bride en aluminium brut
Waterproofing flexible insert Mill finish aluminium side plate
Caractéristiques : Characteristics :
- Brides en aluminium ou acier galvanisé ou inox (304 ou 316). - Aluminium or galvanised steel or stainless steel side plates
(304 or 316).
© All rights reserved - Non contractual drawings - 02/2017
JDH 5.31
S
W
Sol / sol Floor to floor Profilé souple étanche Bride en aluminium brut
Waterproofing flexible insert Mill finish aluminium side plate
Caractéristiques : Characteristics :
- Brides en aluminium ou acier galvanisé ou inox (304 ou 316). - Aluminium or galvanised steel or stainless steel side plates
(304 or 316).
© All rights reserved - Non contractual drawings - 02/2017
JDH 5.32
S
W
Sol / sol Floor to floor
S
JDH 6.02 / F JDH 6.02 / S
S
H
W
H
W
B
B
Characteristics
Expansion joint especially designed to withstand heavy loads like trucks, forklifts...
This profile is available with galvanized steel side plates and a galvanized steel, brass or 304 or 316 stainless steel cover plate. It is also
available with side plates made of 316 stainless steel and a 304 or 316 stainless steel cover plate.
Fixing
This profile can be mounted using anchors for mechanical fastening or chemical bonding.
Applications
All industrial applications, railway stations, airports, malls...
© All rights reserved - Non contractual drawings - 02/2017
H HH
HH
H
H1
H1
H1
WW WW
JDH
JDH/6.4/L
Sol 6.4/L
sol Floor to floor JDH
Sol6.4
JDH /6.4
sol Floor to floor
190 kN
600 kN 600 kN
Charge [kN] / Load-bearing capacity [kN]
W
B
Sol / sol Floor to floor Sol / mur Floor to wall
90 kN
Load-bearing capacity [kN]
B
Sol / sol Floor to floor Sol / mur Floor to wall
Charge [kN]
69 kN
46 kN
31 kN
W Pare vapeur
B Vapour barrier
Sol / sol Floor to floor Sol / sol avec rehausse Floor to floor with extension
46 kN
31 kN
JDH 6.12
S
W
B
Sol / sol Floor to floor
90 kN
Load-bearing capacity [kN]
Livré prêt à poser avec des cadres en aluminium qui seront enlevés après Profile supplied pre-fitted with aluminium clamps that should be removed
avoir positionné et fixé le joint. only after positioning and fixing the joint.
Fixations mécaniques ou chimiques tous les 30 cm, posées en quinconce Mechanical or chemical fixings every 30 cm, alternately on each side of
de part et d’autre du profilé. the profile.
Existe aussi en version sol/mur Floor to wall profile also available.
© All rights reserved - Non contractual drawings - 02/2017
JDH 6.14
S
H
W
Sol / sol Floor to floor
Livré prêt à poser avec des cadres en aluminium qui seront enlevés après Profile supplied pre-fitted with aluminium clamps that should be removed
avoir positionné et fixé le joint. only after positioning and fixing the joint.
Fixations mécaniques ou chimiques tous les 30 cm, posées en quinconce Mechanical or chemical fixings every 30 cm, alternately on each side of
de part et d’autre du profilé. the profile.
W
B
Sol / sol Floor to floor
JDH 6.18
S
B
Sol / sol Floor to floor
JDH 6.20
S
B
Sol / sol Floor to floor
W
Sol / sol Floor to floor
JDH 6.24 A
S
W
Sol / mur Floor to wall
Ref. JDH 6.22 6.22-050 6.22-050 A 6.22-100 6.22-100 A 6.22-150 6.22-150 A 6.22-200 6.22-200 A
Ref. JDH 6.24 6.24-050 6.24-050 A 6.24-100 6.24-100 A 6.24-150 6.24-150 A 6.24-200 6.24-200 A
W [mm] ouverture / Gap up to [mm] 50 100 150 200
H [mm] hauteur / Depth [mm] 27
S [mm] approx. 170 125 250 210 320 305 420 408
Mouvement admissible M [mm]
+25 / -25 +25 / -25 +50 / -50 +50 / -50 +75 / -75 +75 / -75 +100 / -100 +100 / -100
Accomodation of movement M [mm]
Matériau / Material Aluminium ou inox 304 / Aluminium or 304 stainless steel
Longueur standard [ml]
3
Standard length [lm]
Charge [kN]
Load-bearing capacity [kN]
© All rights reserved - Non contractual drawings - 02/2017
JDH 6.26
JDH 6.26 S
Spécial sol souple / Special flexible floors H
W
Sol / sol Floor to floor
JDH 6.26 A
S
W
Sol / mur Floor to wall
Ref. JDH 6.26 6.26-050 6.26-050 A 6.26-100 6.26-100 A 6.26-150 6.26-150 A 6.26-200 6.26-200 A
W [mm] ouverture / Gap up to [mm] 50 100 150 200
H [mm] hauteur / Depth [mm] 40
S [mm] approx. 170 125 220 175 330 240 330 265
B [mm] approx. 330 205 380 255 490 320 490 345
Mouvement admissible M [mm]
Accomodation of movement M [mm] +50 / -30 +40 / -30 +50 / -50 +40 / -30 +80 / -100 +55 / -60 +80 / -100 +55 / -80
JDH 6.28
Spécial carrelage ou pierre / Special tiles or stones
JDH 6.28
S
B
Sol / sol Floor to floor
JDH 6.30
S
W
B
Sol / sol Floor to floor
B
Sol / sol Floor to floor
Matériau / Material Acier inoxydable (304 ou 316) / Stainless steel (304 or 316)
Charge [kN]
Load-bearing capacity [kN]
JDH 6.35
S S
MH
W W
Charge [kN]
31 kN
46 kN
JDT 7.02 S S
H
H
W
Plat Flat Angle Angle
Réf. JDT 7.02 7.02-350 7.02-400 7.02-450 7.02-500 7.02-550 7.02-600 7.02-650 7.02-700
W [mm] ouverture / Gap up to 50 100 150 200
H [mm] hauteur / Depth 99 100 101 103 104 105 106 107
S [mm] approx. 350 400 450 500 550 600 650 700
Mouvement admissible M [%]
+ 50% / - 50%
Accomodation of movement M [%]
Matériau / Material Aluminium (7.02 Alu), Acier inox (7.02 Inox) / Aluminium (7.02 Alu), stainless steel (7.02 stainless steel)
Réf. JDT 7.02 A 7.02-200 A 7.02-250 A 7.02-300 A 7.02-350 A 7.02-400 A 7.02-450 A 7.02-500 A 7.02-550 A 7.02-600 A
H [mm] hauteur / Depth 119 121 124 127 129 132 134 137 141
S [mm] approx. 200 250 300 350 400 450 500 550 600
Mouvement admissible M [%]
+50% / -50%
Accomodation of movement M [%]
Matériau / Material Aluminium (7.02 Alu), Acier inox (7.02 Inox) / Aluminium (7.02 Alu), stainless steel (7.02 stainless steel)
Pièce en croix / Cross shaped piece Pièce en «T» / «T» shaped piece Pièces en «L» / «L» shaped pieces
1 plan 2 plans
Series JF 1600
PRESENTATION
joints.
strong winds, Notches at the base of the profile allow an excellent bonding of the tiles to the adhesive.
Series JF 1600 movement control joints are available in heights from 3 mm to 30 mm and
vibrations created by nearby 10 mm wide (visible part).
Can be used as part of the decoration design or for their high load-bearing performance. In addition, they are
extremely resistant to chemicals that appear during tiles installation. It is to be noted that brass oxidizes when in
contact with air, particularly in a humid environment. Over time, the visible part is covered with “sheen”, an oxidised
layer, which modifies its aspect.
Can be used as part of the decoration design and whenever no particular chemical reaction is expected. To prevent
corrosion, cement-based materials must be used carefully. As aluminium reacts when in contact with alkaline
products, it is important to carefully remove all traces of mortar, cement based adhesive and grout from all the visible
surfaces.
Can be used as part of the decoration design but also in environments subject to strong mechanical constraints
(heavy loads) or chemical constraints (acids). Stainless steel profiles can be used in the food industry, hospitals,
swimming-pools, etc...
In all cases, it is necessary to make sure that the Series JF 1600 movement control joints are adapted to the expected mechanical and
chemical requirements.
MAINTENANCE
Series JF 1600 movement control joints do not require any specific maintenance. They can be cleaned using standard cleaning products
provided that they do not contain hydrochloric or hydrofluoric acids and are not abrasive.
INSTALLATION :
1. Choose Series JF 1600 control joint profile according to the thickness of the tiles.
2. Apply tile adhesive around the junction using a serrated trowel.
3. Press the profile into the adhesive bed paying attention to its position.
4. Spread mortar over the entire surface of the joint.
5. Press in tiles firmly and align them so that they are flush with the surface. Lay the tiles without leaving any gaps.
6. Allow a joint of 2 mm around the profile.
7. Then fill the space between the tiles and the profile with grout.
Series JF 1700
PRESENTATION
joints.
sometimes differential
TECHNICAL CHARACTERISTICS
settlement Series JF 1700 movement control joints are made of a flexible ethylene-propylene (EPDM) black,
beige or grey (other colours on request) rubber insert, heat welded (vulcanisation) to two metal
• Movements generated by sideplates. Vulcanisation ensures an extremely strong and stable bonding between metal and the
flexible and resilient EPDM insert.
the environment : The metal plates are available in aluminium, brass or stainless steel. They ensure a very efficient
strong winds, protection of the flooring edges while the resilient internal part absorbs the movements and
prevents cracks in the flooring.
vibrations created by nearby Notches at the base of the metal plates allow setting of wire ties for better anchoring into the screed.
Series JF 1700 movement control joints can also be supplied without notches allowing setting after
construction works, pedestrian installation of the flooring.
Series JF 1700 movement control joints are available in different heights with metal plates and
traffic, trolleys, vehicles, etc...
rubber insert of varying thicknesses.
Can be used as part of the decoration design or for their high load-bearing performance. In addition, they are extremely
resistant to chemicals that appear during tiles installation. It is to be noted that brass oxidizes when in contact with
air, particularly in a humid environment. Over time, the visible part is covered with “sheen”, an oxidised layer, which
modifies its aspect
With anchor piece
Can be used as part of the decoration design and whenever no particular chemical reaction is expected. To prevent
corrosion, cement-based materials must be used carefully. As aluminium reacts when in contact with alkaline products,
it is important to carefully remove all traces of mortar, cement based adhesive and grout from all the visible surfaces.
Can be used as part of the decoration design but also in environments subject to strong mechanical constraints (heavy
loads) or chemical constraints (acids). Stainless steel profiles can be used in the food industry, hospitals, swimming-
pools, etc...
In all cases, it is necessary to make sure that the Series 1700 movement control joints are adapted to the expected mechanical and chemical
requirements.
MAINTENANCE S
Series 1700 movement control joints do not require any specifics
maintenance. They can be cleaned using standard cleaning products
Anchor piece
provided that they do not contain hydrochloric or hydrofluoric acids and H
are not abrasive. H = 20 / 30 / 40 / 50 mm
S = 9 mm
FIELD OF APPLICATION
Series JF Luxe 2700 aluminium, brass or stainless steel movement control joints are designed to
Origin of these malfunctions :
partition rigid floors such as ceramic tiles, marble, granite, natural stone, etc.
• Concrete thermal They are made of two brass side plates bonded to a compressible adhesive foam and an elastomeric
sealant. The Series JF Luxe 2700 aluminium, brass or stainless steel garantees a very high quality
expansion and contraction
decorative and luxurious finish.
according to temperature FINISHES
variations. The stainless steel and brass side plates visible parts can be supplied either mill finish, satin finish
or high gloss polished.
• Concrete shrinkage The elastomeric sealant is available in any standard or non standard colour.
during curing.
• Structural settlement,
sometimes differential
settlement.
• Movements generated by
the environment : Dimensions
Height H : 20 / 30 / 40 mm
strong winds, S
Width S : 10 / 15 mm S
vibrations created by Thickness e : 3 / 5 mm
Other dimensions upon request
nearby construction works, depending on quantities
pedestrian traffic, trolleys, H H
vehicles, etc...
Series JF Déco
PRESENTATION
Series JF 600
PRESENTATION
malfunctions (cracks,
joints.
curing
• Movements generated by
Series JF 600 control joints are mainly used as an economical alternative to Series JF 1600 or
the environment : whenever aesthetics is not a selection criterion or whenever mechanical constraints do not require
solid metal sideplates.
strong winds,
Series JF 600 control joints are available in different heights. Standard colours are grey, white, and
vibrations created by nearby
black. Series JF 600 control joints can also be produced in special heights and colours according
construction works, pedestrian to customer’s requirements. They are made of non-recycled and non-polluting raw materials in
compliance with REACH regulations applicable since January 2009.
traffic, trolleys, vehicles, etc...
In all cases, it is necessary to make sure that the Series JF 600 movement control joints are adapted to the expected
mechanical and chemical requirements.
MAINTENANCE
Series JF 600 movement control joints do not require any specific S
maintenance.
H
They can be cleaned using standard cleaning products provided that they
do not contain hydrochloric or hydrofluoric acids and are not abrasive.
Series JF 700
PRESENTATION
joints.
• Concrete shrinkage during Movement control joints are set in sufaces between 25 and 60 m2 with a maximum dimension of 5
to 10 meters. The joint must be inserted in at least 2/3 of the mortar bed height, preferably it must
curing
occupy all the thickness of the mortar plus tiling built-up.
• Structural settlement,
TECHNICAL CHARACTERISTICS
sometimes differential
Series JF 700 control joints are made of coextruded PVC, with rigid PVC external sides and a
settlement flexible PVC internal core which compresses during movement. The rigid PVC external sides ensure
an efficient protection of flooring edges while the resilient internal core absorbs movements and
• Movements generated by prevents cracks in the flooring.
the environment :
Series JF 700 control joints are mainly used as an economical alternative to Series JF 1700 or
strong winds, whenever aesthetics is not a selection criterion or whenever mechanical constraints do not require
solid metal sideplates.
vibrations created by nearby
Series JF 700 control joints are available in different heights. Standard colours are grey, white, and
construction works, pedestrian black. Series JF 700 control joints can also be produced in special heights and colours according
to customer’s requirements. They are made of non-recycled and non-polluting raw materials in
traffic, trolleys, vehicles, etc...
compliance with REACH regulations applicable since January 2009.
In all cases, it is necessary to make sure that the Series JF 700 movement control joints are adapted to the expected mechanical and chemical
requirements.
S
MAINTENANCE
Series JF 700 movement control joints do not require any specific
maintenance.
They can be cleaned using standard cleaning products provided that they H
do not contain hydrochloric or hydrofluoric acids and are not abrasive.
Series JF 800
Joint de fractionnement de sol destiné à prévenir
JF 800/S
les désordres (décollements, fissurations) qui
ne manquent pas de se produire lorsque des
revêtements de sols sont posés en grande
surface sans joint.
Ils peuvent être fournis avec des capuchons inox
permettant une finition plus luxueuse.
W
B
600 kN
Load-bearing capacity [kN]
© All rights reserved - Non contractual drawings - 02/2017
Series RJ
Joint de fractionnement pour dallage béton. Mise
en place avant le coulage servant de guide de
niveau et de joint de fractionnement pour guider
la fissuration.
Series RJ
Series ADS
DESCRIPTION
Antislip adhesive marking for
all regular and irregular -even
wet- surfaces.
• Aqua Grip : Made from flexible PVC or polyurethane. Its smooth surface is ideal for
barefoot walking on wet surfaces such as boats, swimming pools, bathrooms, kitchens,
COLOURS etc.
Standard colours : black, grey,
white, yellow, transparent, blue, • Alu Grip : Can be used to mark up irregular surfaces. To be hammered into
place (using a rubber hammer). Ideal for metal or tiled stairs,
green, red, brown or bright
scaffolding, ramps and gangways, etc.
colours : fluorescent yellow, etc.
All Pantone, RAL colours are • Rigid Grip : Antislip strip fixed on a ready to install, drilled, aluminium plate with round
edges. Ideal for surfaces which require an immediate antislip protection (standard plate
possible depending on quantities.
size 115 x 635 mm).
SURFACE ROUGHNESS
Very fine, fine, standard, coarse
and very coarse grained.
Aqua grip Alu grip
PRESENTATION
• Standard rolls of 18,30 lm.
• Widths : 25 mm, 50 mm, 100 mm, 150 mm.
• Other widths from 9 mm to 1 000 mm.
• Strips of 150 mm x 610 mm.
• Pieces of 140 mm x 140 mm with rounded corners.
• Disks of Ø 50 mm. Rigid Grip Plate
• Aluminium rigid plates of 115 mm x 635 mm.
• Custom cutting : any size, any shape, any colour.
• To print your own message, please enquire.
Standard shapes
ANCILLARIES
• Primer : Ideal for sealing indoor and outdoor porous surfaces. Brush on to apply.
• Glue : For a longer durability, glue the edges.
• Cleaner : Use a isopropanol based cleaning product for the preparation of the
substrate.
Transparent on tiles
Series NDM VD
NDM 320
68
90°
43
Longueur standard
3 ml 3 meters
Standard length
NDM 550
58
90°
39
Longueur standard
3 ml 3 meters
Standard length
NDM 1010
100
82°
35
Profilé de finition pour marche béton Stair nosing for concrete stairs,
Ref. NDM 1010
Antidérapant, Trafic intense Antislip, Heavy traffic
Longueur standard
3 ml 3 meters
Standard length
Series BAE
Series BAE D Series BAE A
S
S
k c
H c H
b
b
Utilisation : Profilé avec anneau central pour joints de dilatation Afin de faciliter l’installation, des clips spéciaux et des œillets en
internes : mouvements de dilatation, contraction, cisaillement, laiton sont disponibles sur demande.
tassement ...
For an easy installation we deliver special waterstop clips or
Application : For expansion joints in concrete. brass eyelets upon request.
Accessoires de coffrage ( agraphes de maintiens, cales d’espacement, etc) disponibles sur demande.
Formwork accessories (retaining staples, spacers, etc.) upon request.
Caractéristiques PVC / Material properties - PVC Series BAE D / Series BAE A
Series BAE
Series BAE AD Series BAE AA
S S
k c c
H H
b b
AD AD AD AD AD AD AD AA AA AA AA AA AA AA
Type Type
200 250 250/35 320 320/35 500/25 500/35 200 250 250/35 320 320/35 500 500/35
S [mm] 200 240 240 320 320 500 500 S [mm] 200 240 240 320 320 500 500
b [mm] 80 90 90 110 110 120 120 b [mm] 80 90 90 110 110 120 120
H [mm] 20 25 35 25 35 25 35 H [mm] 20 25 35 25 35 25 35
k [mm] 20 20 20 20 20 20 20 n 4 4 4 6 6 8 8
n 4 4 4 6 6 8 8
n = nombre de nervures d’ancrage / n = number of anchoring ribs n = nombre de nervures d’ancrage / n = number of anchoring ribs
Tolérances selon DIN 16941 / Dimensional tolerances to DIN 16941 Tolérances selon DIN 16941 / Dimensional tolerances to DIN 16941
Load
• Easy to extrude time
30°C 4 mn 2h
• Perfect in hot countries
• Storage : 12 months 35°C 3 mn 1h45 Time
• Good in wet and CHEMICAL RESISTANCE
BARS SPECIFICATIONS (Fe E500)
diamond drilling
Min. resistance
Elasticity limit Max load
immersion
immersion
immersion
CHARACTERISTICS Diameter (mm) at breaking
Fe (daN) Fe/1,15 (daN) Product
point (daN)
Coulour : White
Short
Long
Hardener : Black amina
No
8 2766 2515 2187
Mix : Grey 10 4317 3925 3413 Water x
Mix ratio : 1:1 Salted water x
12 6215 5650 4913
Mix density : 1,5 Hot water >60°C x
14 8470 7700 6695
PACKAGING Gasoil x
16 11055 10050 8739
Side by side 2 components Kerosen x
20 17270 15700 13652
cartridges : 400 ml Methanol x
WORKING LOADS according to BAEL 91 Acethon x
ß C20/25 C35/45
VED-POXY resin - HA Fe E500 steel Acier Fe E500 1,51 1 Soda (50%) x
Working load comes from the equation L=ß *(F/D) where L (mm) is the depth, F (daN) the max load possible on Chlorhydric acid
x
10% (20°C)
the bar, D (mm) the drill bit diameter and ß a parameter linked to the quality of concrete.
20/25 concrete 35/45 concrete Sulfuric acid
x
L min depth (mm) F min (daN) L min depth (mm) F min (daN)
50% (30°C)
bar Ø Drill bit Ø
(mm) (mm) L max depth (mm) F max (daN) L max depth (mm) F max (daN) Citric acid x
8 10 80 530 80 800 Chlorinated water
8 10 330 2187 219 2187 White spirit x
10 12 100 795 100 1000
USER’S GUIDE
10 12 429 3413 284 3413
12 16 120 1272 120 1440
12 16 463 4913 307 4913
14 18 140 1669 140 1960
Drill Clean
14 18 561 6695 372 6695
16 20 160 2119 160 2560
16 20 660 8739 437 8739
20 25 200 3311 200 4000
20 25 824 13652 546 13652 Inject Insert the bar Let set, then
apply load
© All rights reserved - Non contractual drawings - 02/2017
DESCRIPTION
CHARACTERISTICS
• Watertight joint : allows water to flow.
• Allows all movements (horizontal, vertical and shear).
• High resistance to traction and to tearing.
• Compatible with all other waterproofing systems.
INSTALLATION
To be fixed using our special sealant for EPDM membranes on a clean and dry surface.
Applications
VEDAFLEX SIL perfectly adheres on surfaces commonly used in the building
industry : concrete, glass, aluminium, etc.
Chiefly recommended for :
• Watertightness of joint seals between concrete and structural carpentry
• Windows sealing
• Sealing of prefabricated concrete pieces
• Waterproofing of curtain walls
• All applications where inodorous mastic is needed
Technical characteristics
Main physical characteristics before curing
Aspect Thixotropic paste
Density 1,25
Skinning time 4 - 7 min.
Application temperature + 5ºC to + 40ºC
Main physical characteristics after curing
Service temperature - 40 °C to + 150°C
Mechanical characteristics
Shore A hardness DIN 53505 25
Modulus 100 % ISO 8339 0,40 MPa
Tensile strength ISO 8339 1,40 MPa
Elongation at break ISO 8339 550 %
Specifications
VEDAFLEX SIL has been awarded Label SNJF 1st class without primer on glass, aluminium and concrete.
Conditionnement et stockage
VEDAFLEX SIL is supplied in 310 ml cartridges. It has a shelf-life of 12 months stored in a dry place between 5ºC and 25ºC.
Colours
White, grey, brown, black, bronze, ivory.
Installation
Substrates must be clean, free of dust, grease or any other material that prevent adhesion of silicon. Use appropriate cleaning
products according to the substrate.
Some substrates may require a primer. If not sure, always proceed to a preliminary test.
Do not paint Vedaflex SIL.
© All rights reserved - Non contractual drawings - 02/2017
Nitrile
Used for joint waterproofing profiles, nitrile has been developped according to DIN 18541. It is made from high quality raw
materials and offers larger capacities than commonly required.
Nitrile joint waterproofing profiles according to DIN 18541 has a very high coefficient of elongation at break, is extremely
resistant to chemicals and ageing and offers a permanent elasticity similar to that of rubber.
Joints are made quickly and economically using common thermoplastic welding techniques (due to better conductibility of
nitrile profiles, it is not recommended to use a welding hatchet of less than 300 watts power).
Nitrile joint waterproofing profiles are available in several shapes (the most usual ones) and are adapted to all sorts of
constructions whether demanding or not.
Nitrile does not contain cadmium or lead and is suitable for exterior use. It is resistant to oils and tars, oxygen, acids and
bases, germs and U.V rays. It does not suffer from ageing and keeps its elasticity over time.
PVC
Aluminium
16 17 17 18 18 18.5 18.5
Galvanized steel