Professional Documents
Culture Documents
B ENGINE
SECTION
FUEL SYSTEM
FL FL
E
CONTENTS
FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL TANK ................................................................ 3 F
FUEL PUMP ASSEMBLY ........................................... 2 Components ............................................................. 3
Components ............................................................. 2 SERVICE DATA AND SPECIFICATIONS (SDS) ........ 4
INSTALLATION ..................................................... 2 Standard and Limit .................................................... 4 G
FUEL TANK ........................................................... 4
FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL PUMP ASSEMBLY PFP:17042
Components GBS002N3
PBIC3777E
PBIC3781E
Lock ring
NOTE:
● There are two kinds of lock rings: With/without a triangle mark
on the rim of lock ring.
● The triangle mark on the rim of a lock ring can be negligible
because it does not determine any location or direction.
PBIC3869J
FL
PBIC4177E
K
1. Fuel filler cap 2. Grommet 3. Fuel filler tube
4. Hose clamp 5. Fuel filler hose 6. Hose clamp
7. Vent hose 8. Fuel tank 9. EVAP hose L
10. Fuel tank band (RH) 11. Fuel tank band (LH) 12. Screw
13. EVAP canister 14. Drain hose 15. Drain hose
16. Drain hose 17. Drain hose 18. M
A. To centralized under-floor piping
FUEL TANK
Fuel tank capacity Approx. 52 (11-1/2 Imp gal)
Fuel recommendation Refer to GI-6