Professional Documents
Culture Documents
Fridge Freezer
ZBB27640SA
Contents
Safety information 2 Care and cleaning 8
Safety Instructions 3 Troubleshooting 8
Operation 5 Installation 10
Daily use 5 Technical information 14
Hints and tips 6 Noises 15
Safety information
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible if an
incorrect installation and use causes injuries and damages.
Always keep the instructions with the appliance for future
reference.
Children and vulnerable people safety
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Cleaning and user maintenance shall not be made by children
without supervision.
General Safety
• This appliance is intended to be used in household and similar
applications such as:
– Farm houses; staff kitchen areas in shops, offices and other
working environments
– By clients in hotels, motels, bed and breakfast and other
residential type environments
• Keep ventilation openings, in the appliance enclosure or in the
built-in structure, clear of obstruction.
2 www.zanussi.com
• Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the
manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type
recommended by the manufacturer.
• Do not use water spray and steam to clean the appliance.
• Clean the appliance with a moist soft cloth. Only use neutral
detergents. Do not use abrasive products, abrasive cleaning
pads, solvents or metal objects.
• Do not store explosive substances such as aerosol cans with a
flammable propellant in this appliance.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
Safety Instructions
Installation • When you move the appliance, lift it by the
front edge to avoid scratching the floor.
WARNING!
Only a qualified person must install Electrical connection
this appliance.
WARNING!
• Remove all the packaging. Risk of fire and electrical shock.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied • The appliance must be earthed.
with the appliance. • All electrical connections should be made by
• Always be careful when you move the a qualified electrician.
appliance because it is heavy. Always wear • Make sure that the electrical information on
safety gloves. the rating plate agrees with the power
• Make sure the air can circulate around the supply. If not contact an electrician.
appliance. • Always use a correctly installed shockproof
• Wait at least 4 hours before connecting the socket.
appliance to the power supply. This is to • Do not use multi-plug adapters and
allow the oil to flow back in the compressor. extension cables.
• Do not install the appliance close to • Make sure not to cause damage to the
radiators or cookers, oven or hobs. electrical components (e.g. mains plug,
• The rear of the appliance must stand against mains cable, compressor). Contact the
the wall. Service or an electrician to change the
• Do not install the appliance where there is electrical components.
direct sunlight. • The mains cable must stay below the level of
• Do not install this appliance in areas that are the mains plug.
too humid or too colds, such as the • Connect the mains plug to the mains socket
construction appendices, garages or wine only at the end of the installation. Make sure
cellars. that there is access to the mains plug after
the installation.
www.zanussi.com 3
• Do not pull the mains cable to disconnect • Obey the storage instructions on the
the appliance. Always pull the mains plug. packaging of frozen food.
4 www.zanussi.com
Operation
Operation temperature lights up. Selection is
progressive, varying from 2 to 8°C.
1 2 At first button touch actual setting LED
keeps blinking.
Any time the button is touch the set
temperature is moved to 1 position .
Corresponding LED will blink for a while.
Touch the setting button until the required
temperature is selected. The set will be fixed
coldest setting: +2°C warmest
setting: +8°C A medium setting is
generally the most suitable.
However, the exact setting should be chosen
4 3
keeping in mind that the temperature inside the
1. Temperature indicator LED appliance depends on:
2. QuickFreeze indicator • room temperature
3. QuickFreeze • how often the door is opened
4. Temperature regulator • quantity of food stored
ON/OFF button • appliance location.
Daily use
WARNING!
Refer to Safety chapters.
Movable shelves
The walls of the refrigerator are equipped with a
series of runners so that the shelves can be
positioned as desired.
www.zanussi.com 5
Positioning the door shelves Ice-cube production
To permit storage of food packages of various This appliance is equipped with one or more
sizes, the door shelves can be placed at trays for the production of ice-cubes.
different heights.
Do not use metallic instruments to
1. Gradually pull the shelf in the direction of remove the trays from the freezer.
the arrows until it comes free
1. Fill these trays with water
1 2. Put the ice trays in the freezer compartment.
6 www.zanussi.com
• A faint click noise from the temperature • Bananas, potatoes, onions and garlic, if not
regulator when the compressor switches on packed, must not be kept in the refrigerator.
or off.
Hints for freezing
Hints for energy saving
To help you make the most of the freezing
• Do not open the door frequently or leave it process, here are some important hints:
open longer than absolutely necessary.
• the maximum quantity of food which can be
• If the ambient temperature is high and the
frozen in 24 hrs. is shown on the rating
Temperature Regulator is set to low
plate;
temperature and the appliance is fully
• the freezing process takes 24 hours. No
loaded, the compressor may run
further food to be frozen should be added
continuously, causing frost or ice on the
during this period;
evaporator. If this happens, set the
• freeze only top quality, fresh and thoroughly
Temperature Regulator toward warmer
cleaned, foodstuffs;
settings to allow automatic defrosting and so
• prepare food in small portions to enable it to
a saving in electricity consumption.
be rapidly and completely frozen and to
• If foreseen, do not remove the cold
make it possible subsequently to thaw only
accumulators from the freezer basket.
the quantity required;
• wrap up the food in aluminium foil or
Hints for fresh food refrigeration
polythene and make sure that the packages
To obtain the best performance: are airtight;
• do not allow fresh, unfrozen food to touch
• do not store warm food or evaporating
food which is already frozen, thus avoiding a
liquids in the refrigerator
rise in temperature of the latter;
• do cover or wrap the food, particularly if it
• lean foods store better and longer than fatty
has a strong flavour
ones; salt reduces the storage life of food;
• position food so that air can circulate freely
• water ices, if consumed immediately after
around it
removal from the freezer compartment, can
Hints for refrigeration possibly cause the skin to be freeze burnt;
• it is advisable to show the freezing in date on
Useful hints: each individual pack to enable you to keep
• Meat (all types) : wrap in polythene bags and tab of the storage time.
place on the glass shelf above the vegetable
drawer.
Hints for storage of frozen food
• For safety, store in this way only one or two To obtain the best performance from this
days at the most. appliance, you should:
• Cooked foods, cold dishes, etc..: these
• make sure that the commercially frozen
should be covered and may be placed on
foodstuffs were adequately stored by the
any shelf.
retailer;
• Fruit and vegetables: these should be
• be sure that frozen foodstuffs are transferred
thoroughly cleaned and placed in the special
from the foodstore to the freezer in the
drawer(s) provided.
shortest possible time;
• Butter and cheese: these should be placed
• not open the door frequently or leave it open
in special airtight containers or wrapped in
longer than absolutely necessary;
aluminium foil or polythene bags to exclude
• once defrosted, food deteriorates rapidly
as much air as possible.
and cannot be refrozen;
• Bottles: these need a cap and should be
• do not exceed the storage period indicated
stored on the door bottle shelf, or (if
by the food manufacturer.
equipped) on the bottle rack.
www.zanussi.com 7
Care and cleaning
WARNING! compartment channel to prevent the water
Refer to Safety chapters. overflowing and dripping onto the food inside.
Periodic cleaning
The equipment has to be cleaned regularly:
• clean the inside and accessories with
lukewarm water and some neutral soap.
• regularly check the door seals and wipe
clean to ensure they are clean and free from
debris.
• rinse and dry thoroughly.
Do not pull, move or damage any
pipes and/or cables inside the
cabinet. Never use detergents, Defrosting the freezer
abrasive powders, highly perfumed The freezer compartment is frost free. This
cleaning products or wax polishes to means that there is no build up of frost when it
clean the interior as this will damage is in operation, neither on the internal walls nor
the surface and leave a strong on the foods.
odour.
The absence of frost is due to the continuous
Clean the condenser (black grill) and the circulation of cold air inside the compartment,
compressor at the back of the appliance with a driven by an automatically controlled fan.
brush. This operation will improve the
performance of the appliance and save Periods of non-operation
electricity consumption.
When the appliance is not in use for long
Take care of not to damage the periods, take the following precautions:
cooling system. When moving the 1. Disconnect the appliance from electricity
cabinet, lift it by the front edge to supply.
avoid scratching the floor. 2. Remove all food.
3. Clean the appliance and all accessories.
Defrosting of the refrigerator 4. Leave the door/doors open to prevent
unpleasant smells.
Frost is automatically eliminated from the
evaporator of the refrigerator compartment WARNING!
every time the motor compressor stops, during If the cabinet will be kept on, ask
normal use. The defrost water drains out somebody to check it once in a
through a trough into a special container at the while to prevent the food inside from
back of the appliance, over the motor spoiling in case of a power failure.
compressor, where it evaporates.
It is important to periodically clean the defrost
water drain hole in the middle of the refrigerator
Troubleshooting
WARNING!
Refer to Safety chapters.
8 www.zanussi.com
What to do if...
The appliance does not operate. The appliance is switched off. Switch on the appliance.
The mains plug is not connec- Connect the mains plug to the
ted to the mains socket cor- mains socket correctly.
rectly.
There is no voltage in the Connect a different electrical appli-
mains socket. ance to the mains socket. Contact
a qualified electrician.
The appliance is noisy. The appliance is not supported Check if the appliance stands sta-
properly. ble.
The lamp does not work. The lamp is in stand-by. Close and open the door.
The lamp does not work. The lamp is defective. Contact the nearest Authorized
Service Centre.
The compressor operates contin- Temperature is set incorrectly. Refer to "Operation" chapter.
ually.
Many food products were put Wait some hours and then check
in at the same time. the temperature again.
The room temperature is too Refer to climate class chart on the
high. rating plate.
Food products placed in the Allow food products to cool to
appliance were too warm. room temperature before storing.
The door is not closed correct- Refer to "Closing the door".
ly.
The QuickFreeze function is Refer to "QuickFreeze function".
switched on.
The compressor does not start This is normal, no error has oc- The compressor starts after a peri-
immediately after pressing the curred. od of time.
QuickFreeze, or after changing
the temperature.
Water flows inside the refrigera- The water outlet is clogged. Clean the water outlet.
tor.
Food products prevent that Make sure that food products do
water flows into the water col- not touch the rear plate.
lector.
Water flows on the floor. The melting water outlet is not Attach the melting water outlet to
connected to the evaporative the evaporative tray.
tray above the compressor.
www.zanussi.com 9
Problem Possible cause Solution
Temperature cannot be set. The QuickFreeze or QuickChill Switch off QuickFreeze or Quick-
function is switched on. Chill manually, or wait until the
function resets automatically to set
the temperature. Refer to "Quick-
Freeze or QuickChill function".
The temperature in the appliance The temperature regulator is Set a higher/lower temperature.
is too low/too high. not set correctly.
The door is not closed correct- Refer to "Closing the door".
ly.
The food products' tempera- Let the food products temperature
ture is too high. decrease to room temperature be-
fore storage.
Many food products are stored Store less food products at the
at the same time. same time.
The door has been opened of- Open the door only if necessary.
ten.
The QuickFreeze function is Refer to "QuickFreeze function".
switched on.
There is no cold air circulation Make sure that there is cold air cir-
in the appliance. culation in the appliance.
Installation
WARNING!
Refer to Safety chapters. Climate Ambient temperature
class
Positioning
SN +10°C to + 32°C
This appliance can be installed in a dry, well
ventilated indoor where the ambient N +16°C to + 32°C
temperature corresponds to the climate class
indicated on the rating plate of the appliance: ST +16°C to + 38°C
T +16°C to + 43°C
10 www.zanussi.com
Some functional problems might 1. Connect the wire coloured green and
occur for some types of models yellow to the terminal marked either with the
when operating outside of that letter “E“ or by the earth symbol or
range. The correct operation can coloured green and yellow.
only be guaranteed within the 2. Connect the wire coloured blue to the
specified temperature range. If you terminal either marked with the letter “N“ or
have any doubts regarding where to coloured black.
install the appliance, please turn to 3. Connect the wire coloured brown to the
the vendor, to our customer service terminal either marked with the “L“ or
or to the nearest Service Centre coloured red.
4. Check that no cut, or stray strands of wire is
Electrical Connection present and the cord clamp (E) is secure
over the outer sheath.
CAUTION! Make sure the electricity supply voltage is
Any electrical work required to install the same as that indicated on the appliance
this appliance should be carried out rating plate.
by a qualified electrician or 5. Switch on the appliance.
competent person. The appliance is supplied with a 13 amp fuse
(B). In the event of having to change the fuse in
WARNING! the plug supplied, a 13 amp ASTA approved
This appliance must be earthed. The (BS 1362) fuse must be used.
manufacturer declines any liability
should these safety measures not be WARNING!
observed. A cut off plug inserted into a 13 amp
socket is a serious safety (shock)
The wires in the mains lead are coloured in hazard. Ensure that it is disposed of
accordance with the following code: safely.
A B Ventilation requirements
The airflow behind the appliance must be
sufficient.
5 cm
min. 200cm2
min.
C 200cm2
D
E
www.zanussi.com 11
8. Remove the correct part from the hinge
x cover (E). Make sure to remove the part DX,
in the case of right hinge, SX in opposite
case.
x
2 C
D
E E
1
4. Make sure that the distance between the 10. Install the vent grille (B).
appliance and the cupboard front-edge is 11. Attach the hinge covers (E) to the hinge.
44 mm. 12. Connect the appliance laterally to the
kitchen furniture sidewall:
a. Loosen the screws of the part (G) and
move the part (G) till the furniture
sidewall.
4mm
b. Tighten the screws of the part (G)
again.
44mm c. Attach the part (H) to the part (G).
GH
Hc Hd
I
12 www.zanussi.com
a. Install the part (Ha) on the inner side of
the kitchen furniture.
~50 mm
90o
21 mm
90o
~50 mm Hb
21 mm
18. Press the part (Hd) on the part (Hb).
Ha
Hb
Hd
Hc Do a final check to make sure that:
• All screws are tightened.
14. Open the appliance door and the kitchen • The magnetic sealing strip is
furniture door at an angle of 90°. attached tightly to the cabinet.
a. Insert the small square (Hb) into guide
(Ha). If the ambient temperature is low (for
8 mm example, in winter), the size of the
gasket decreases. The size of the
gasket increases when the ambient
temperature increases.
Hb Door reversibility
Ha WARNING!
Before carrying out any operations,
b. Put together the appliance door and the remove the plug from the power
furniture door and mark the holes. socket.
15. Remove the brackets and mark a distance
of 8 mm from the outer edge of the door CAUTION!
where the nail must be fitted (K). To carry out the following
operations, we suggest that this be
8 mm
made with another person that will
K Ha keep a firm hold on the doors of the
appliance during the operations.
1. Loosen the upper pin and remove the
spacer.
2. Remove the upper pin and the upper door.
www.zanussi.com 13
6. Install the lower pin on the opposite side.
7. Tighten the middle hinge.
8. Install the upper door.
9. Tighten the spacer and tighten the upper
pin.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the
cabinet.
3. Loosen the middle hinge. • The door opens and closes
correctly.
If the ambient temperature is cold
(i.e. in Winter), the gasket may not fit
perfectly to the cabinet. In that case,
wait for the natural fitting of the
gasket. In case you do not want to
carry out the above mentioned
operations, contact the nearest After
Sales Service Force. The After Sales
4. Remove the lower door. Service specialist will carry out the
5. Loosen the lower pin. reversibility of the doors at your cost.
Technical information
Technical data
14 www.zanussi.com
Noises
There are some sounds during normal running (compressor, refrigerant circulation).
SSS !
RRR ICK
! CL
HISSS! BRRR!
OK B! CR
UB AC
BL K!
www.zanussi.com 15
BLUBB! BLUBB! CRACK! CRACK!
ENVIRONMENTAL CONCERNS
16 www.zanussi.com
*
www.zanussi.com 17
18 www.zanussi.com
www.zanussi.com 19
222369820-A-082014
www.zanussi.com/shop