Professional Documents
Culture Documents
IS OUR PASSION
Product Range
Specialty Lubricants
www.fuchs-lubritech.com
» With passion we face your challenges and solve them
with both experience and commitment in focused
teamwork. «
Being part of the group of companies of FUCHS PETROLUB SE, Our product brands, like CEPLATTYN®, CASSIDA®, LUBRODAL®,
the world’s largest independent supplier of lubricants, we act gleitmo® or STABYL®, represent top quality and reliability in the
flexibly and independently – with our own self-contained prod most diverse branches of industry, such as cement and mining,
uct range and world-leading strong brands. forging, food and beverage, wind power, steel, construction,
railways, glass and surface technology.
Headquartered in Kaiserslautern, Germany, and with locations
in the United Kingdom, France, Australia, the USA, Brazil, Japan, We consider service as a crucial and fundamental component of
China and India as well as distributors and partners in more than our products. Our local experts contribute through their broad
60 countries we guarantee the worldwide availability of our process-spanning expertise and on-site technical consultation to
products. You can always rely on a uniform quality standard all the performance, efficiency and process reliability of your entire
over the world. application.
HMP films...........................................................................39/30
Adhesive lubricants Page
Cleaning agents for HMP films................................................. 31
Solids-containing, fluids........................................................... 10
Solvent-based Solid Film Lubricants (SFL).................................. 32
Splash lubrication............................................................... 10/11
Water-based Solid Film Lubricants (SFL)...............................32/33
Graphited / Grease-based....................................................11/12
Cleaners.................................................................................. 35
Lubricating greases Page
Solid lubricant powders........................................................... 36
Plain and roller bearing greases for temperatures
up to +140°C......................................................................14–16
Hydraulic oils
.....................................................................................................................
.....................................................................................................................
ECO-HYD S range .....................................................................................................................
.....................................................................................................................
Base oil
Temperature Classifi- Flash-
Eco-friendly hydraulic oils based on synthetic ester Base oil range in °C cation
viscosity at
40°C [mm2/s] point in °C
For all types of industrial and vehicle hydraulics, particularly in environmentally synth. Ester
sensitive areas. Easily biodegradable as per OECD 301 B. ECO-HYD 32 S -35 / +90 HLPE 32 33 290
ECO-HYD 46 S -35 / +90 HLPE 46 49 290
Approvals/Recommendations: Bosch Rexroth, FSP Fluid System Partners (ARGO), ECO-HYD 68 S -35 / +90 HLPE 68 69 300
STILL ECO-HYD 46 S-NWG* -30 / +90 HLPE 46 47 290
* not hazardous to waters
.......................................................................................................................
.......................................................................................................................
ECO-HYD S PLUS .......................................................................................................................
.......................................................................................................................
For hydraulics under harsh conditions e.g. at extreme temperature fluctuations. synthetic -30 / +100 HLPE 46 46 230
Can replace universal oil-based hydraulic oils of the viscosity classes ISO VG 22 - 68
forexample due to its outstanding multigrade character.
4 FUCHS LUBRITECH GMBH
Gear oils LUBRICATING FLUIDS
..................................................................................................................
..................................................................................................................
GEARMASTER CLP range ..................................................................................................................
..................................................................................................................
They clearly surpass the requirements of DIN 51517-3 and are characterised by their mineral oil
excellent ageing resistance, exceptional wear prevention properties as well as their GEARMASTER CLP 68 -15 / +120 CLP 68 68 220
ability to withstand grey staining. GEARMASTER CLP 100 -15 / +120 CLP 100 100 220
GEARMASTER CLP 150 -15 / +120 CLP 150 150 220
Approvals/Recommendations: AUMUND Fördertechnik, FLSmidth, Gebr. Pfeiffer, GEARMASTER CLP 220 -15 / +120 CLP 220 220 220
KHD Humboldt Wedag International, Loesche, GEARMASTER CLP 320 -15 / +120 CLP 320 320 220
pekrun Getriebebau, R. STAHL, ThyssenKrupp GEARMASTER CLP 460 -10 / +120 CLP 460 460 230
Resource Technologies, Siemens-Flender GEARMASTER CLP 680 -10 / +120 CLP 680 680 230
................................................................................................................
................................................................................................................
GEARMASTER CLPF range ................................................................................................................
................................................................................................................
gears and worm gears, especially at low peripheral speeds and shock loads. Results mineral oil
in a longer service life of heavy-duty gears. GEARMASTER CLPF 100 -15 / +120 CLPF 100 100 240
GEARMASTER CLPF 220 -10 / +120 CLPF 220 220 260
Approvals/Recommendations: DIN 51517-3, Ferry Capitain, R. STAHL GEARMASTER CLPF 320 -10 / +120 CLPF 320 320 255
GEARMASTER CLPF 460 -5 / +120 CLPF 460 460 270
GEARMASTER CLPF 680 -5 / +120 CLPF 680 680 270
GEARMASTER CLPF 1500 0 / +120 CLPF 1500 1500 270
.................................................................................................................
.................................................................................................................
GEARMASTER SYN range .................................................................................................................
.................................................................................................................
.................................................................................................................
.................................................................................................................
GEARMASTER PGP range .................................................................................................................
.................................................................................................................
gears and worm gears. Wherever there is a high share of sliding parts in gears as Polyglykol
well as for use at very high temperatures. GEARMASTER PGP 100 -30 / +150 CLP-PG 100 100 260
GEARMASTER PGP 150 -30 / +150 CLP-PG 150 150 240
Approvals/Recommendations: FLSmidth, Gebr. Pfeiffer, Loesche, GEARMASTER PGP 220 -30 / +150 CLP-PG 220 220 240
pekrun Getriebebau, Schaeffler Technologies GEARMASTER PGP 320 -30 / +150 CLP-PG 320 320 240
(FAG), ThyssenKrupp Resource Technologies, GEARMASTER PGP 460 -30 / +150 CLP-PG 460 460 280
Siemens-Flender GEARMASTER PGP 680 -20 / +150 CLP-PG 680 680 280
GEARMASTER PGP 1000 -20 / +150 CLP-PG 1000 1000 280
..................................................................................................................
..................................................................................................................
GEARMASTER ECO range ..................................................................................................................
..................................................................................................................
Technologies GEARMASTER ECO 460 -30 / +150 CLPE 460 460 280
GEARMASTER ECO 680 -30 / +150 CLPE 680 680 280
FUCHS LUBRITECH GMBH 5
LUBRICATING FLUIDS Chain fluids for temperatures up to +150°C
..................................................................................................................................
..................................................................................................................................
STABYLAN 3080 ..................................................................................................................................
..................................................................................................................................
For chain drives operating at high humidity, e.g. in docks, escalators, drive and mineral oil -25 / +80 100 > 200
conveying chains.
For lubrication of levers, joints, chains and other mechanisms, particularly for mineral oil -30 / +60 19.5 > 65
oscillating movements. Wherever rapid and self-activating penetration of the
lubricant is required. Reduces friction losses and functional performance drops and
protects against fretting corrosion.
For chain drives of all types in the normal temperature range, e.g. in the automo- mineral oil -30 / +100 40 >158
tive industry, chemical industry, mechanical engineering, for transport or conveyor
chains, forklift chains and external wire rope lubrication.
.........................................................................................................................
.........................................................................................................................
STABYLAN 2001 .........................................................................................................................
.........................................................................................................................
For conveyor and drive chains operating at elevated temperatures e.g. in the che- semi-synthetic -15 / +150 215 > 290
For chains, plain and roller bearings at high temperatures, e.g. in furnaces, dryers, synthetic -10 / +220 160 > 260
For conveyor and drive chains as well as plain and roller bearings and sliding surfaces synthetic -10 / +220 160 > 245
particularly for high-temperature operation in furnaces and dryers etc., e.g. in the
chemical and automotive industry, in mechanical engineering, wood and plastics
processing, packaging systems and in glass industry. Excellent dry running properties.
6 FUCHS LUBRITECH GMBH
Chain fluids for extreme temperatures LUBRICATING FLUIDS
.................................................................................................................................
.................................................................................................................................
STABYLAN 5000 .................................................................................................................................
.................................................................................................................................
For conveyor and drive chains, stenter frames, conveying equipment, dryers in the synthetic -20 / +240 100 > 260
chemical, mechanical engineering and textile industries. Is characterised by very
low evaporation losses and does not form any lacquer-like deposits even at increas
ed operating temperatures.
Approvals/Recommendations: Brückner
.................................................................................................................................
.................................................................................................................................
STABYLAN 5001 .................................................................................................................................
.................................................................................................................................
For high-temperature applications for conveyor and drive chains, bearings and synthetic -15 / +240 180 > 260
sliding surfaces in the chemical and automotive, textile technology and raw mate-
rials industries. Is characterised by very low evaporation losses and does not form
any lacquer-like deposits even at increased operating temperatures. Excels in the
lubrication of chains in tempering furnaces of the insulation material industry.
For minimum quantity lubrication of chains in tempering furnaces for insulation synthetic -20 / +260 130 > 290
production as well as all types of steel link chains. Is characterised by very low evapo-
ration losses and does not form any lacquerlike deposits even at increased operating
temperatures. The high flash point offers maximum safety at high temperatures.
Approvals/Recommendations: LEITNER
.............................................................................................................................
.............................................................................................................................
STABYLAN ECO 20 .............................................................................................................................
.............................................................................................................................
Base oil Temperature range in °C Base oil viscosity at 40°C [mm2/s]
Biodegradable lubricating fluid synthetic -40 / +160 95
For all types of chains and oil-lubricated machine elements, particularly in environ-
mentally sensitive areas characterised by its very good corrosion protection and high
water resistance.
.........................................................................................................................................
.........................................................................................................................................
CEDRACON .........................................................................................................................................
.........................................................................................................................................
Base oil Temperature range in °C
Wire rope lubricant and preservation fluid with graphite mineral oil -35 / +65
For wire ropes exposed to heavy mechanical stresses and chemical influences, e.g.
in mining, steel works, and in the chemical industry.
8 FUCHS LUBRITECH GMBH
Lubricating fluids for rail traffic LUBRICATING FLUIDS
.....................................................................................................................................
.....................................................................................................................................
TRAMLUB S 4 .....................................................................................................................................
.....................................................................................................................................
Base oil Temperature range in °C Base oil viscosity at 40°C [mm2/s]
Eco-friendly rail and wheel flange lubricating fluid synthetic -30 / +100 37
For eco-friendly lubrication of rails and wheel flanges of railway vehicles.
FUCHS LUBRITECH GMBH 9
ADHESIVE LUBRICANTS
Adhesive lubricants
CEPLATTYN products are used:
The brand name CEPLATTYN has a long tradition and is acknowledged
world wide. CEPLATTYN was the first sprayable adhesive lubricant • for the lubrication of highly loaded and/or pre-damaged
developed more than 50 years ago. Nowadays adhesive lubricants gear drive units.
marketed under this name are available throughout the world in a who- • for initial lubrication and for the specialised running-in
le range of specially formulated products for a wide range of applica- open-running gear drives up to operational lubrication.
tions. This group of products contains both grease based lubricants, For this purpose the use of MULTI-PHASE-LUBRICATION (M-P-L)
which contain a high graphite content, and solid-free, high-viscous fluids. is recommended which, through the use of selected
CEPLATTYN grades, offers optimum protection, particularly
The CEPLATTYN adhesive lubricants range fulfils the tough tribotechnical during the commissioning of a new drive unit.
conditions encountered. The CEPLATTYN range can be used in numerous • for lubrication of gear drives, where minimum application
industrial applications, e.g. open-running drive units on tube mills, rotary quantities are required
kilns, dryers, ore crushers, calcinators etc. In addition on slewing rings, • for the lubrication of large link chains.
rack-and-pinion devices, slide rails and bolted connections. CEPLATTYN • for lubrication and preservation of wire ropes.
is also used for the inner lubrication and maintenance of wire ropes. • for lubrication in steel construction for hydraulic engineering,
CEPLATTYN lubricants are suitable for the most varied operating condi- where environmentally-harmless products are required.
tions and can be used with all types of application equipment. They are
free of heavy metals, chlorine and solvents. Wear is reduced through the CEPLATTYN adhesive lubricants are recommended and prescribed
use of special additive packages and their excellent adhesive qualities, by leading equipment manufacturers.
thereby ensuring minimum consumption rates.
Solids-containing, fluids
.....................................................................................................................
.....................................................................................................................
CEPLATTYN GT 10 .....................................................................................................................
.....................................................................................................................
Solid Temperature
Light-coloured, high-viscosity adhesive lubricant Colour Base oil Thickener lubricants range in °C
with white solid lubricants for Open Gears light-coloured synthetic white 0 /+140
CEPLATTYN GT 10 is a high-viscosity adhesive lubricant for heavy-duty Open Gears, Base oil viscosity
e.g. on kilns, mills and driers in the raw materials industry. CEPLATTYN GT 10 has Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
been especially developed for the application on Open Gears under critical operating 10000
conditions, such as low-speed kiln drives with increased tooth flank temperatures, mill
drives with extreme drive power, and drives which are frequently operated under start-
stop conditions.
Splash lubrication
..................................................................................................................
..................................................................................................................
CEPLATTYN 100 HV • MV ..................................................................................................................
..................................................................................................................
Colour Base oil Thickener Solid lubricants
Semi-liquid adhesive lubricants black mineral oil Al-X C
For bath lubrication of Open Gears in mills, dryers and rotary kilns. Temperature range Base oilviskosi-
in °C tät at 40°C [mm2/s]
10 FUCHS LUBRITECH GMBH
Splash lubrication ADHESIVE LUBRICANTS
................................................................................................................................
................................................................................................................................
CEPLATTYN GT 3 ................................................................................................................................
................................................................................................................................
Solid Temperature
Light-coloured, high-viscosity adhesive lubricant Colour Base oil Thickener lubricants range in °C
with white solid lubricants for Open Gears light-coloured synthetic white -5 / +140
CEPLATTYN GT 3 has been especially developed for the application on Open Gears Base oil viscosity
under critical operating conditions, such as low-speed kiln drives with increased tooth Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
flank temperatures, mill drives with extreme drive power, and drives which are fre- 3200
quently operated under start-stop conditions.
Graphited/grease-based
.........................................................................................................................
.........................................................................................................................
CEPLATTYN 300 .........................................................................................................................
.........................................................................................................................
Solid Temperature
Graphite paste with high-pressure and adhesive additives Colour Base oil Thickener lubricants range in °C
Priming lubricant for large Open Gear drives, toothed racks, sliding surfaces. Can black mineral oil Al-X C -30 / +250
also be used as a lubricant for chains, sliding surfaces and gears in steel hydraulic Base oil viscosity
engineering, in open cast and underground mines as well as for wire ropes. Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
Solid Temperature
Sprayable running-in lubricant for Open Gears Colour Base oil Thickener lubricants range in °C
CEPLATTYN RN can be applied to single and double pinion drives of any kind of tube black semi-synthetic Al-X Combination -10 / +140
mills and kilns, e.g. in cement works, fertilizer plants, combustion and compost units. Base oil viscosity
CEPLATTYN RN is applied to gear drives with high performance. Furthermore it is used Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
when running under critical operating conditions, when having big tooth widths or - 00 460 200
when running with high speeds.
Solid Temperature
Sprayable adhesive lubricant for Open Gears Colour Base oil Thickener lubricants range in °C
For open running gear drive units of tube mills, rotary kilns, dryers, crushers. black mineral oil Al-X C -10 / +140
Solid Temperature
Sprayable adhesive lubricant for Open Gears Colour Base oil Thickener lubricants range in °C
For open running gear drives used under heavy loads and where the surrounding black mineral oil Al-X C -10 / +140
and tooth flank temperatures are permanently increased as well as for gear drives Base oil viscosity
with slightly damaged tooth flanks and unfavourable load pattern. Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
OGPF0-00N-10 0-00 1000 190
Approvals/Recommendations: Ferry Capitain, FLSmidth, KHD Humboldt Wedag
International, ThyssenKrupp Resource Technologies
FUCHS LUBRITECH GMBH 11
ADHESIVE LUBRICANTS Graphited/grease-based
............................................................................................................
............................................................................................................
CEPLATTYN KG 10 HMF-2500 ............................................................................................................
............................................................................................................
Solid Temperature
Sprayable adhesive lubricant for Open Gears Colour Base oil Thickener lubricants range in °C
For drives with pre-damaged load-carrying tooth flanks (pitting formation, chipped black mineral oil Al-X C +5 / +140
surface etc.) and for tooth flank temperatures of more than +70°C. Because of the Base oil viscosity
high viscosity of the base oil, transmission of vibrations is dampened. Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
OGPF0-00N+5 0-00 2500 180
Approvals/Recommendations: Ferry Capitain, FLSmidth, KHD Humboldt Wedag
International, Outotec, ThyssenKrupp Resource
Technologies
...................................................................................................................................
...................................................................................................................................
CEPLATTYN BL ...................................................................................................................................
...................................................................................................................................
Solid Temperature
Graphited adhesive lubricant Colour Base oil Thickener lubricants range in °C
For lubrication of machines and machine parts under difficult operating conditions, black mineral oil Al-X C -20 / +150
e.g. gear wheels, slide bars, chains, worm gears and ropes as well as for lubricati- Base oil viscosity
on of machine parts subject to outdoor temperature fluctuations and environmen- Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
tal influences. Also suitable for use on wind turbine actuators. OGPF2P-20 2 500 260
Approvals/Recommendations: FLSmidth
Light-coloured, graphite-free
................................................................................................................................
................................................................................................................................
CEPLATTYN SF P ................................................................................................................................
................................................................................................................................
Colour Base oil Thickener Temperature range in °C
Light-coloured priming lubricant for Open Gears beige semi-synthetic Al-X - 20 / +140
Used as a priming lubricant for Open Gears, is especially adjusted to CEPLATTYN SF NLGI-grade Base oil viscosity at 40°C [mm2/s] Drop point in °C
operational lubricants. 1-2 300 220
Approvals/Recommendations: Metso
12 FUCHS LUBRITECH GMBH
Light-coloured, graphite-free ADHESIVE LUBRICANTS
........................................................................................................................
........................................................................................................................
CEPLATTYN BL WHITE ........................................................................................................................
........................................................................................................................
Colour Base oil Thickener Temperature range in °C
Adhesive lubricant with reactive solid lubricants white semi-synthetic Al-X -40/+160
CEPLATTYN BL WHITE is especially used for the lubrication of azimut and pitch NLGI-grade Base oil viscosity at 40°C [mm2/s] Drop point in °C
gears in wind power plants. In addition to that it is used, e.g. on gears, sliding 1-2 300 220
tracks, chains, worm gears, and wire ropes, or for the lubrication of machine parts
subjected to considerable temperature fluctuations and environmental influences.
...................................................................................................................................
...................................................................................................................................
CEPLATTYN TL ...................................................................................................................................
...................................................................................................................................
Colour Base oil Solid lubricants Thickener
Oil emulsion with solid, metallic lubricants silver Fluid metallic -
Temperature range in °C Base oil viscosity at 40°C [mm2/s]
For internal lubrication of riding rings fitted to rotary kilns or dryers. Silver-coloured,
+5 / +230 -
thus very good application inspection.
FUCHS LUBRITECH GMBH 13
LUBRICATING GREASES
Lubricating greases
In the area of lubricating greases it is also true that extremes are a mentally-sensitive areas, to high and exceptionally high-temperature
challenge for us. FUCHS LUBRITECH lubricating greases are effectively greases for use in extreme operating conditions. Numerous approvals
used in all industrial areas. Wherever traditional lubricants, for use and testimonials from users confirm the high efficiency and
for whatever reason, do not fulfil the requirements or simply do not reliability of FUCHS LUBRITECH greases. Hidden behind the product
work in the best possible way, we see benefits in using our high- names are highly-developed and tested lubricating greases, which care
performance greases. The spectrum ranges from long-life greases for for our customers’ machinery and plants in the best possible way.
mechanical engineering, biodegradable lubricating greases for environ-
Solid Temperature
Heavy-duty, extremely water-resistant EP long-term grease Colour Base oil Thickener lubricants range in °C
For all plain and roller bearings, on which there are high dynamic loads, e.g. in greenish semi-synthetic Ca - -30 / +120
industry, construction and agricultural machinery. It provides excellent resistance to Base oil viscosity
water and salt water as well as extremely good adhesive properties. Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
KP2K-30 2 800 > 140
Approvals/Recommendations: Baier + Köppel, Dellner Couplers, Josef Fröhling,
Lincoln
..............................................................................................................
..............................................................................................................
LAGERMEISTER BF 1 • BF 2 ..............................................................................................................
..............................................................................................................
Universal greases for plain and roller bearings in mechanical engineering, mineral oil Li - -20 / +120
the chemical industry and construction machines. For varying loads and speeds. Base oil visco- Drop
Classifi- NLGI- sity at 40°C point
Colour cation grade mm2/s] in °C
Approvals/Recommendations: Baier + Köppel, General Motors, KHD Humboldt LAGERMEISTER BF 1 brown KP1K-20 1 220 185
Wedag International, Maschinenfabrik Köppern, LAGERMEISTER BF 2 natural colour yellowish KP2K-20 2 200 190
Outotec, Salzgitter Maschinenbau (SMAG),
SMS Meer, ThyssenKrupp Rothe Erde
............................................................................................................
............................................................................................................
LAGERMEISTER CA 95/100 N ............................................................................................................
............................................................................................................
Solid Temperature
Water-resistant grease with graphite Colour Base oil Thickener lubricants range in °C
For underwater lubrication of plain and roller bearings on vertical lift and lock gates, black mineral oil Ca C -30 / +60
large sprocket chains, closing elements in sewage plants, cable wheel mounts on Base oil viscosity
dredgers etc. Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
MF2C-30 2 90 100
Approvals/Recommendations: KIROW ARDELT, ThyssenKrupp Resource Technologies
14 FUCHS LUBRITECH GMBH
Plain and roller bearing greases for
temperatures up to +140°C LUBRICATING GREASES
..........................................................................................................................
..........................................................................................................................
LAGERMEISTER EP 2 ..........................................................................................................................
..........................................................................................................................
Solid Temperature
Long-life EP grease Colour Base oil Thickener lubricants range in °C
For lubrication of plain and roller bearings subject to high and shock loads, tempe- natural colour mineral oil Li - -20 / +130
rature fluctuations and difficult environmental conditions in, for example general Base oil viscosity
engineering, the chemical industry, iron and steel industries, construction machi- Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
nery or automobile industries. KP2K-20 2 200 190
Solid Temperature
High-performance EP grease with semi-fluid white solid lubricants Colour Base oil Thickener lubricants range in °C
For lubrication of machine elements in the mixed friction area, such as roller and beige mineral oil Ca-X white -30 / +120
plain bearings subjected to high pressure, intermittent loads and vibrating or oscil- Base oil viscosity
lating movements. It is particularly appropriate if the surrounding area involves high Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
...................................................................................................................
...................................................................................................................
LAGERMEISTER SL • SLG ...................................................................................................................
...................................................................................................................
For lubrication of plain and roller bearings at normal operating temperatures in mineral oil Li 190 100
mechanical engineering, and conveyors. It is also suitable as a chassis and sealing Classi NLGI- Solid Temperature
grease. Colour fication grade lubricants range in °C
LAGERMEISTER SL beige K2-3K-20 2-3 - -20 / +120
LAGERMEISTER SLG grey-black KF2K-30 2 graphite -30 / +120
.............................................................................................................................
.............................................................................................................................
LAGERMEISTER TS .............................................................................................................................
.............................................................................................................................
Solid Temperature
Semi-synthetic high-performance roller bearing grease Colour Base oil Thickener lubricants range in °C
For plain and roller bearings under difficult operating conditions. Especially recommend natural colour semi-synthetic Li - -30 / +140
ed for high pressures and low revolutions per minute . Allows longer regreasing intervals Base oil viscosity
when compared to conventional greases. Very good adhesive properties. Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
KP2N-30 2 800 190
Solid Temperature
High-performance EP grease with white solid lubricants Colour Base oil Thickener lubricants range in °C
white mineral oil Li white -20 / +120
For plain and roller bearings operating under extreme conditions (dust,
water, vibrations), e.g. conveyors, construction machines, raw material processing Base oil viscosity
Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
machines. For lubrication of plastic crosshead guides on telescopic cranes. Also
KPF1-2K-20 1-2 320 190
available as fluid.
.........................................................................................................................................
.........................................................................................................................................
STABYL HD .........................................................................................................................................
.........................................................................................................................................
Solid Temperature
EP heavy-duty grease Colour Base oil Thickener lubricants range in °C
For heavy-duty roller bearings under extreme operating conditions in heavy grey-black mineral oil Li C, MoS2 -10 / +120
machine construction and in the cement and raw materials industry. Base oil viscosity
Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
FUCHS LUBRITECH GMBH 15
Plain and roller bearing greases
LUBRICATING GREASES for temperatures up to +140°C
.....................................................................................................................................
.....................................................................................................................................
STABYL L 120 .....................................................................................................................................
.....................................................................................................................................
Solid Temperature
EP multipurpose grease Colour Base oil Thickener lubricants range in °C
For plain and roller bearing lubrication at high loads, temperature fluctuations and natural colour mineral oil Li - -20 / +130
difficult environmental conditions, esp. for the chemical industry, hydraulic steel engi- Base oil viscosity
neering and construction machinery. Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
KP2-3K-20 2-3 200 190
Approvals/Recommendations: AUMUND Fördertechnik, KHD Humboldt Wedag
International, Salzgitter Maschinenbau (SMAG),
Sandvik, SMS Meer, ThyssenKrupp Resource Technologies
................................................................................................................................
................................................................................................................................
STABYL L-TS MO ................................................................................................................................
................................................................................................................................
Solid Temperature
MoS2-containing semi-synthetic heavy-duty grease Colour Base oil Thickener lubricants range in °C
For plain and roller bearings under difficult operating conditions. black semi-synthetic Li MoS2 -30 / +140
Especially recommended for high pressures and low speeds. Allows longer Base oil viscosity
regreasing intervals when compared to conventional greases. Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
KPF2N-30 2 800 190
Approvals/Recommendations: KHD Humboldt Wedag International, Komatsu
Mining Germany, Loesche, SMS Meer,
ThyssenKrupp, Rothe Erde
..................................................................................................................................
..................................................................................................................................
STABYL MO 500 ..................................................................................................................................
..................................................................................................................................
Solid Temperature
MoS2-containing long-term grease Colour Base oil Thickener lubricants range in °C
For plain and roller bearings of all types subjected to continuous high mechanical grey-black mineral oil Li MoS2 -25 / +120
loads. Mechanical engineery industry, chemical industry, iron and steel works, Base oil viscosity
construction machines and automotive industry. Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
KPF2-3K-25 2-3 110 190
Approvals/Recommendations: China National Materials (Sinoma), ThyssenKrupp
Resource Technologies, Zeppelin Baumaschinen
water is present as well as whenever there is a danger of fretting corrosion. KP2N-30 2 120 > 250
Ideally suited for the lubrication of highly-loaded plain and roller bearings on all Base oil viscosity
kinds of construction machinery, especially under harsh operating conditions, high Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
loads and increased temperatures. Allows reduced number of lubricants and in- KP2P-30 2 180 290
For plain and roller bearings, guides at highest loads, high temperatures and consi- grey-black mineral oil Al-X -20 / +150 320
derable temperature fluctuations, e.g. in raw materials industry, iron and steel works, Classification NLGI-grade Drop point in °C
chemical industry, sintering plants, calanders, extruders. STABYL 300 AL 1 KPF1P-20 1 260
STABYL 300 AL 2 KPF2P-20 2 270
................................................................................................................................
................................................................................................................................
STABYL AX 1 • 2 ................................................................................................................................
................................................................................................................................
Universal greases for many applications at highest specific loads, high temperatures brown mineral oil Al-X -20 / +150 320
and and considerable temperature fluctuations. Particularly suitable for central Classification NLGI-grade Drop point in °C
lubrication systems with long feed lines and low diameters. STABYL AX 1 KP1P-20 1 260
STABYL AX 2 KP2P-20 2 270
Approvals/Recommendations: Palfinger systems, Sprimag Spritzmaschinenbau
.....................................................................................................................................
.....................................................................................................................................
STABYL EHT 2 .....................................................................................................................................
.....................................................................................................................................
Colour Base oil Thickener Temperature range in °C
High-temperature long-term grease for heavy-duty plain beige synthetic PTFE -20 / +220
and roller bearings Base oil viscosity
Long-life lubrication of plain and roller bearings subjected to heavy-duty Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
thermal and mechanical loads, e.g. in drying plants, conveying and transportation KPE1-2T-20 1-2 160 > 270
equipment, film stretching machines etc.
Has a wide operating temperature range, high mechanical stability, pronounced KPE1-2K-40 1-2 320 >190
load bearing capacity and excellent corrosion protection properties. It can be used
both for the lubrication of rotor bearings as well as for the blade and
azimuth bearings.
FUCHS LUBRITECH GMBH 17
LUBRICATING GREASES Plain and roller bearing greases for extreme temperatures
................................................................................................................................
................................................................................................................................
URETHYN CC 2-1 ................................................................................................................................
................................................................................................................................
Colour Base oil Thickener Temperature range in °C
Steel works grease acc. to SEB 181 255 yellowish-brown mineral oil organic -20 / +180
For plain and roller bearings operating under the influence of temperature and humidity, Base oil viscosity
Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
e.g. roller bed bearings in continuous casting as well as in the steel and raw materials
industry etc. KP1R-20 1 460 > 230
.....................................................................................................................................
.....................................................................................................................................
URETHYN E 2 .....................................................................................................................................
.....................................................................................................................................
Colour Base oil Thickener Temperature range in °C
Fully synthetic polyurea high-temperature grease cream-coloured synthetic organic -20 / +200
For long-life or lifetime lubrication of thermally highly loaded plain and roller bea- Base oil viscosity
Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
rings in the chemical industry, textile industry, conveying and drying equipment as
well as in KTL installations in the automotive industry. KPE1-2S-20 1-2 100 290
textile machines, ventilator bearings in dryers and kilns, spindle beige semi-synthetic organic -20 / +180 150 260
bearings. Lubrication of plastics, elastomers and sealing elements. Classification NLGI-grade
URETHYN E/M 1 KPE1R-20 1
Approvals/Recommendations: ANDRITZ, Bosch Rexroth, KHD Humboldt Wedag URETHYN E/M 2 KPE2R-20 2
International, NEFF Gewindetriebe
..................................................................................................................................
..................................................................................................................................
URETHYN HG 0 ..................................................................................................................................
..................................................................................................................................
Colour Base oil Thickener Temperature range in °C
Solid lubricant containing polyurea grease with an extremely light beige synthetic organic -50 / +200
wide operating temperature range Base oil viscosity
Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
For lubrication of heavy-duty hinges, joints and other connecting elements. It offers
safe long-term lubrication of steel/steel sliding surfaces subject to considerable - 0 40 > 280
service, snow rollers, cable cars, transport installations in cold-storage depots, KE1N-50 1 23 280
outdoor escalators. Also suitable for high-speed roller bearings.
Smooth, fully synthetic polyurea grease for extreme conditions, such as alternating Base oil viscosity
speeds, temperatures and loads. URETHYN XHD 2 is especially suitable for Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
bearings of large-size generators of wind turbines and thermally and mechanically KPFHC2R-40 2 290 >260
18 FUCHS LUBRITECH GMBH
Plain and roller bearing greases for extreme temperatures LUBRICATING GREASES
............................................................................................................................
............................................................................................................................
URETHYN MP 1 • 2 ............................................................................................................................
............................................................................................................................
For plain and roller bearings at high temperatures, e.g. long-life lubrication of yellowish-brown mineral oil organic -20 / +180 460
roller bearings in electric machines, ventilator bearings, conveyor roller bearings in Classification NLGI-grade Drop point in °C
continuous steel casting plants, pump, blower and compressor equipment. URETHYN MP 1 KP1R-20 1 220
URETHYN MP 2 KP2R-20 2 230
Approvals/Recommendations: FLSmidth, Josef Fröhling, Loesche, Salzhausener
Maschinenbautechnik SALMATEC, Sandvik,
SMS Meer, ThyssenKrupp Resource Technologies,
Zeppelin Baumaschinen
and roller bearings which require an eco-friendly lubricant. KPF2E-30 2 36 > 140
..................................................................................................................................
..................................................................................................................................
STABYL ECO 00 ..................................................................................................................................
..................................................................................................................................
Colour Base oil Thickener Temperature range in °C
Eco-friendly semi-fluid EP grease for central lubrication systems green synthetic Li/Ca -40 / +120
Base oil viscosity
For central lubrication systems, also at low temperatures, e.g. of commercial Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
vehicles of all kinds such as busses, trucks, construction vehicles.
KPE00-000K-40 00-000 100 > 150
Approvals/Recommendations: MAN, SKF
...............................................................................................................................
...............................................................................................................................
STABYL ECO EP 2 ...............................................................................................................................
...............................................................................................................................
Colour Base oil Thickener Temperature range in °C
Eco-friendly EP universal grease beige synthetic Li/Ca -40 / +120
For highly loaded plain and roller bearings in mechanical engineering, hydraulic Base oil viscosity
steel construction, inland navigation and in municipal areas (e.g. waste water treat Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
................................................................................................
................................................................................................
CHEMPLEX SI 300 medium • heavy ................................................................................................
................................................................................................
For use as low-temperature grease, particularly for electrical, electronic and white Silicone Li 70 215
FUCHS LUBRITECH GMBH
precision engineering devices. For plastic/plastic or elastomer/metal pairings, e.g. Classifi- Temperature
in flexible rubber/metal connections. Recommended for reinforcing the sealing cation NLGI-grade range in °C
effect and lubrication of rotary shaft seals, packing rings, O-rings and other seals CHEMPLEX SI 300 medium KSI2P-70 2 -70 / +160
as well as for lubrication of bellows. CHEMPLEX SI 300 heavy KSI3P-60 3 -60 / +160
..................................................................................................
..................................................................................................
CHEMPLEX SI 400 light • medium ..................................................................................................
..................................................................................................
dryers, control devices and household equipment as well as for guides, joints and yellowish Silicone Li -30 / +180 80 > 210
light-duty conveyor chains. Classification NLGI-grade
CHEMPLEX SI 400 light KSI1R-30 1
CHEMPLEX SI 400 medium KSI2R-30 2
...............................................................................................................
...............................................................................................................
CHEMPLEX SI 410 medium ...............................................................................................................
...............................................................................................................
Colour Base oil Thickener Temperature range in °C
Silicone grease with calcium thickener whitish Silicone Ca -40 / +120
For lubrication of light-duty bearings, particularly valves, O-rings andsimilar lubri- Base oil viscosity
cation points. Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
KSI2K-50 2 750 approx. 140
Approvals/Recommendations: Drinking water approval acc. to UBA guideline
......................................................................................
......................................................................................
CHEMPLEX SI 511 fluid • light • medium ......................................................................................
......................................................................................
.............................................................................................................................
.............................................................................................................................
CHEMPLEX SI-LK 2 .............................................................................................................................
.............................................................................................................................
Colour Base oil Thickener Temperature range in °C
Lithium complex soap-based specialty silicone grease white Silicone Li-X -50 / +200
Particularly suitable for long-life lubrication of steel/plastic, plastic/plastic and Base oil viscosity
Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
steel/rubber material pairings. Good load carrying capacity due to white solid
lubricants. KFSI2-3S-50 2-3 190 > 270
.........................................................................................................
.........................................................................................................
SILICONFETT 300 MITTEL/BLQ .........................................................................................................
.........................................................................................................
Colour Base oil Thickener Temperature range in °C
Low-temperature silicone grease, bridge bearing quality white Silicone Li -70 / +160
Used for plain bearings of bridges, sliding plates and other plastic/metal sliding pairs Base oil viscosity
Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
(officially tested quality).
- 2 70 215
20 FUCHS LUBRITECH GMBH
Extreme temperature greases, chemically resistant LUBRICATING GREASES
........................................................................................................................................
........................................................................................................................................
gleitmo 591 ........................................................................................................................................
........................................................................................................................................
Solid Temperature
Extreme-temperature PFPE/PTFE-based lubricant Colour Base oil Thickener lubricants range in °C
For plain and roller bearings at the highest temperatures, e.g. in fans, white synthetic PTFE white -25 / +260
electric motors, transport chains and centrifuge bearings. NLGI-grade1) Base oil viscosity at 40°C [mm2/s] Drop point in °C
2 510 none
1) Also available: NLGI-grades 00, 1, 3
........................................................................................................................................
........................................................................................................................................
gleitmo 593 ........................................................................................................................................
........................................................................................................................................
Solid Temperature
Extreme-temperature PFPE/PTFE-based lubricant Colour Base oil Thickener lubricants range in °C
For roller bearings of low-speed conveyor chains in textile finishing plants, in drying white synthetic PTFE white -25 / +250
and enamelling ovens. NLGI-grade2) Base oil viscosity at 40°C [mm2/s] Drop point in °C
2 510 none
2) Also available: NLGI-grades 1, 3
underground and regional express railways, tramways and industrial railways. C -35 / +100 < 000
FUCHS LUBRITECH GMBH 21
LUBRICATING GREASES Lubricating greases for rail traffic
..........................................................................................................................
..........................................................................................................................
TRAM-SILENCE • 00 ..........................................................................................................................
..........................................................................................................................
Colour Drop point in °C Temperature range in °C Solid lubricants
Eco-friendly railhead treatment agents to minimise the risk of grey-black none -20 / +80 -
squealing Base oil Thickener NLGI-grade
Is applied sparsely to the railhead in order to fight squealing noises in tracks with TRAM-SILENCE native special 0
extreme curves. TRAM-SILENCE 00 synthetic inorganic 00
Semi-fluid greases
........................................................................................................................
........................................................................................................................
GEARMASTER LI 400 ........................................................................................................................
........................................................................................................................
Colour Base oil Thickener Temperature range in °C
Semi-synthetic, semi-fluid gear grease brown semi-synthetic Li-X -30 / +140
For gear motors on DIY equipment and machine tools as well as for all types Base oil viscosity
of small gears. Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
GP00N-30 00 150 > 200
Approvals/Recommendations: Ammann Verdichtung, bielomatik Leuze, KHD
Humboldt Wedag International, Maschinenfabrik
Köppern, Outotec, SMS Meer, ThyssenKrupp
Resource Technologies
.......................................................................................................................
.......................................................................................................................
GEARMASTER LXG 00 .......................................................................................................................
.......................................................................................................................
Colour Base oil Thickener Temperature range in °C
Fully synthetic semi-fluid gear grease yellowish synthetic Li-X -40 / +160
For lubrication of gears of a high power density. Sealing grease for struts in Base oil viscosity
shock absorbers. Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
GPHC00P-40 00 180 220
Approvals/Recommendations: bielomatik Leuze, ThyssenKrupp Resource Technologies
............................................................................................................................
............................................................................................................................
GEARMASTER ZSA ............................................................................................................................
............................................................................................................................
Colour Base oil Thickener Temperature range in °C
Smooth mineral oil-based semi-fluid grease green mineral oil Li -40 / +120
For all lubrication points in commercial vehicles which are supplied by central Base oil viscosity
lubrication systems. Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
GP000K-40 000 45 160
Approvals/Recommendations: bielomatik Leuze, MAN, Zeppelin Baumaschinen
.................................................................................................................................
.................................................................................................................................
URETHYN GE 00 .................................................................................................................................
.................................................................................................................................
Colour Base oil Thickener Temperature range in °C
Fully synthetic polyurea semi-fluid gear grease beige synthetic organic -40 / +160
Is used in fast-running small gears. It is characterised by a high mechanical and Base oil viscosity
Classification NLGI-grade at 40°C [mm2/s] Drop point in °C
thermal stability as well as its compatibility with sealings and by its neutrality to
wards non-ferrous and light metals. GPHC00P-40 00 180 > 260
22 FUCHS LUBRITECH GMBH
PASTES AND GREASE PASTES
Solid Temperature
Semi-synthetic, adhesive grease paste dispersion Colour Base oil Thickener lubricants range in °C
High-performance chain grease for low and high-speed power transmitting chains, beige semi-synthetic Li white -15 / +120
even where resistance to water, water vapour, acids and lyes is required. NLGI-grade Base oil viscosity at 40°C [mm2/s] Drop point in °C
0 - -
...................................................................................................................................
...................................................................................................................................
gleitmo 585 K ...................................................................................................................................
...................................................................................................................................
Solid Temperature
Fully synthetic high-performance grease Colour Base oil Thickener lubricants range in °C
For plain and roller bearings as well as all types of lubricating points, particularly if beige synthetic Li white -45 / +130
they are subject to the risk of fretting corrosion (oscillating movements, NLGI-grade Base oil viscosity at 40°C [mm2/s] Drop point in °C
vibrations, e.g. pitch and azimuth bearings of wind turbines). 2 50 > 180
Solid Temperature
Mineral oil-based high-performance grease Colour Base oil Thickener lubricants range in °C
For bearings and all types of lubricating points, particularly if they are subject to beige mineral oil Li white -25 / +120
the risk of fretting corrosion (oscillating movements, vibrations, e.g. bearings on NLGI-grade Base oil viscosity at 40°C [mm2/s] Drop point in °C
large cardan shafts). 2 100 170
FUCHS LUBRITECH GMBH 23
High-performance pastes with
PASTES AND GREASE PASTES reactive white solid lubricants
.......................................................................................................................................
.......................................................................................................................................
gleitmo 800 .......................................................................................................................................
.......................................................................................................................................
Solid Temperature
White high-performance grease Colour Base oil Thickener lubricants range in °C
Thin film lubrication where extreme pressures, stick-slip, oscillating movements and cream-coloured mineral oil - white -25 / +100
fretting corrosion are prevalent. For assembly, household appliances, textile NLGI-grade Base oil viscosity at 40°C [mm2/s] Drop point in °C
Approvals/Recommendations: Daimler
.......................................................................................................................................
.......................................................................................................................................
gleitmo 805 .......................................................................................................................................
.......................................................................................................................................
Solid Temperature
White high-performance mineral oil-based grease paste Colour Base oil Thickener lubricants range in °C
For articulated bearings, spindles, plain bearings, bolts, chucks and screws which beige mineral oil Li white -20 / +110
are subjected to shock loads and oscillating movements. Other typical fields of NLGI-grade Base oil viscosity at 40°C [mm2/s] Drop point in °C
application are oscillating pins on construction machinery, telescopic beams of 2 185 130
cranes. gleitmo 805 has proved itself for lubrication in the incremental launching
process of bridges.
Solid Temperature
White high-performance synthetic oil-based grease paste Colour Base oil Thickener lubricants range in °C
For articulated bearings, spindles, plain bearings, bolts, chucks and screws, which beige synthetic Li white -45 / +110
are subjected to shock loads and oscillating movements. Outstanding low tempera NLGI-grade Base oil viscosity at 40°C [mm2/s] Drop point in °C
ture behaviour and excellent plastics compatibility. 2 130 160
Solid Temperature
White high-performance mineral oil-based grease paste Colour Base oil Thickener lubricants range in °C
For ball screw drives, multi-groove profiles, ball bushes, gear couplings, threaded white mineral oil Li white -25 / +80
spindles, stainless steel threaded connections, plain bearings, household appliances, NLGI-grade Base oil viscosity at 40°C [mm2/s] Drop point in °C
textile, office and packaging machines. 2 68 160
Solid Temperature
White synthetic oil-based grease paste Colour Base oil Thickener lubricants range in °C
For ball screw drives, multi-groove profiles, ball bushes, gear couplings, threaded beige synthetic inorganic white -45 / +110
spindles, stainless steel threaded connections, plain bearings, household appliances, NLGI-grade Base oil viscosity at 40°C [mm2/s] Drop point in °C
textile, office and packaging machines. With extended temperature range (short 2 115 none
term up to +180ºC). As a spray, especially suitable for assembly and maintenance.
Approvals/Recommendations: MAN
............................................................................................................................
............................................................................................................................
gleitmo WSP 5000 ............................................................................................................................
............................................................................................................................
Solid Temperature
White high-performance grease Colour Base oil Thickener lubricants range in °C
For lubrication of machine parts such as rolling and plain bearings, axles or shafts beige mineral oil Spec. Ca-X white -20 / +140
subjected to high pressures, shock loads and vibrating or oscillating movements, NLGI-grade Base oil viscosity at 40°C [mm2/s] Drop point in °C
especially in high ambient humidities or where there is water splashing. For reduc- 2 350 > 270
tion of friction and wear at high and low loads as well as against fretting corrosi-
on and stick-slip.
24 FUCHS LUBRITECH GMBH
High-performance pastes with
reactive white solid lubricants PASTES AND GREASE PASTES
............................................................................................................................
............................................................................................................................
gleitmo WSP 5040 ............................................................................................................................
............................................................................................................................
Solid Temperature
White high-performance grease paste Colour Base oil Thickener lubricants range in °C
For machine elements of all types subjected to extreme pressures, shock loads and beige mineral oil Spec. Ca-X white -20 / +140
oscillatory movements. It is particularly appropriate if the surrounding area is subject NLGI-grade Base oil viscosity at 40°C [mm2/s] Drop point in °C
to high humidity or the effects of splash water. For sliding pairings, which have a 2 250 > 270
tendency to stick slip and scuffing (fretting). At low sliding speeds and high pres-
sures as well as where fretting corrosion is present. Application as a high-tempe-
rature screw paste up to +1,200°C.
brication of heavy-duty plain bearings, slide and guide rails, gear wheels and screw gleitmo 100 0.1 175
1-2
gleitmo 100 S no stick-slip -
spindles as well as bolt and threaded connections. Facilitates assembly / disassem-
bly and prevents stick-slip. From approx. +140°C dry lubrication by solid lubricants. 1) Press fit test: The press fit test serves for the practical assessment of lubricants in the
low sliding speed and high pressure range. A typical test for the capability assessment of
Based on the higher MoS2 share gleitmo 100 S is suitable for extreme applications. assembly pastes. During the press fit test a bolt (outside diam: 19,075 mm) is pressed
into a bushing (inside diam: 19,050 mm). During the test it is obvious where and when
stick-slip occurs. The insertion or extraction force and the static and dynamic coefficients
Approvals/Recommendations: Daimler, Josef Fröhling, KHD Humboldt Wedag of friction are determined. Additionally, the specific surface pressure is determined from
the change in the external diameter of the sleeve.
International
.......................................................................................................................................
.......................................................................................................................................
gleitmo 700 .......................................................................................................................................
.......................................................................................................................................
Colour Base oil Solid lubricants Temperature range in °C
MoS2 paste with synthetic oil black synthetic MoS2 -40 / +400
For use in all areas of high-temperature lubrication technology, where oils and greases NLGI-grade Base oil viscosity Drop point Press fit test1)
at 40°C [mm2/s] in °C
cannot be used e.g. kiln cab bearings (plain and roller bearings). Also for assembly
and running-in processes. From approx. +200°C dry lubrication by solid 1 180 none 0.12; no stick-slip
1) Press fit test: The press fit test serves for the practical assessment of lubricants in the
lubricants (carrier oil evaporates leaving no residue).
low sliding speed and high pressure range. A typical test for the capability assessment of
assembly pastes. During the press fit test a bolt (outside diam: 19,075 mm) is pressed
into a bushing (inside diam: 19,050 mm). During the test it is obvious where and when
stick-slip occurs. The insertion or extraction force and the static and dynamic coefficients
of friction are determined. Additionally, the specific surface pressure is determined from
the change in the external diameter of the sleeve.
High-temperature pastes
......................................................................................................................................
......................................................................................................................................
gleitmo 155 ......................................................................................................................................
......................................................................................................................................
Colour Base oil Thickener Solid lubricants
Metal-free high-temperature paste white synthetic - white
Temperature range in °C NLGI-grade Drop point in °C
For turbine bolts, high-temperature screws in the chemical industry, in refineries and
-30 / +1200 1-2 -
power stations. Release agent for bolted flanges in the high-temperature range.
..............................................................................................................................
..............................................................................................................................
gleitmo 160 Neu ..............................................................................................................................
..............................................................................................................................
Colour Base oil Thickener Solid lubricants
Universal copper paste copper-coloured mineral oil Al-X Combination
For lubrication of turbine bolts, high-temperature screws and as release agent for Temperature range in °C NLGI-grade Drop point in °C
Approvals/Recommendations: FLSmidth
FUCHS LUBRITECH GMBH 25
PASTES AND GREASE PASTES High-temperature pastes
.......................................................................................................................................
.......................................................................................................................................
gleitmo 165 .......................................................................................................................................
.......................................................................................................................................
Colour Base oil Thickener Solid lubricants
Metallurgically-compatible high-temperature screw paste grey-blue synthetic - Combination
For lubrication of turbine bolts, high-temperature screws and for lubrication of Temperature range in °C NLGI-grade Drop point in °C
bolts, slide rings, sliding rails at high temperatures. No formation of oxide layers. -40 / +1200 2 none
ring, drying and annealing systems. Facing for casting ladles, tools, funnels and -20 / +1000 2 -
spouts in aluminium die casting.
Chisel paste
..................................................................................................................................
..................................................................................................................................
MEISSELPASTE ..................................................................................................................................
..................................................................................................................................
Colour Base oil Thickener Solid lubricants
Special paste based on copper copper-coloured mineral oil Al-X Combination
Copper-coloured mineral oil-based paste with aluminium complex soap and solid Temperature range in °C NLGI-grade Drop point in °C
lubricants to lubricate socket tools and bushings of pneumatic and compressed air -20 / +1100 2 260
tools with weights ranging from 75 to 6,000kg, pneumatic drills and other power
tools. Can also be used under water and at high temperatures.
PFPE pastes
........................................................................................................................................
........................................................................................................................................
gleitmo 591 ........................................................................................................................................
........................................................................................................................................
Solid Temperature
Extreme-temperature PFPE/PTFE-based lubricant Colour Base oil Thickener lubricants range in °C
For plain and roller bearings at the highest temperatures, e.g. in fans, white synthetic PTFE white -25 / +260
electric motors, transport chains and centrifuge bearings. NLGI-grade1) Base oil viscosity at 40°C [mm2/s] Drop point in °C
2 510 none
1) Also available: NLGI-grades 00, 1, 3
........................................................................................................................................
........................................................................................................................................
gleitmo 593 ........................................................................................................................................
........................................................................................................................................
Solid Temperature
Extreme-temperature PFPE/PTFE-based lubricant Colour Base oil Thickener lubricants range in °C
For roller bearings of low-speed conveyor chains in textile finishing plants, in drying white synthetic PTFE white -25 / +250
and enamelling ovens. NLGI-grade2) Base oil viscosity at 40°C [mm2/s] Drop point in °C
2 510 none
2) Also available: NLGI-grades 1, 3
........................................................................................................................................
........................................................................................................................................
gleitmo 594 ........................................................................................................................................
........................................................................................................................................
Solid Temperature
Extreme-temperature lubricant based on PFPE/PTFE Colour Base oil Thickener lubricants range in °C
For low-speed roller bearings in high-temperature ranges as well as in drying and white synthetic PTFE white -25 / +250
enamelling ovens. In precision engineering, armatures, valve plugs, ball valves and NLGI-grade Base oil viscosity at 40°C [mm2/s] Drop point in °C
26 FUCHS LUBRITECH GMBH
Silicone pastes PASTES AND GREASE PASTES
..................................................................................................................................
..................................................................................................................................
CHEMPLEX 746 ..................................................................................................................................
..................................................................................................................................
Colour Base oil Thickener Solid lubricants
Silicone paste with white solid lubricants white Silicone oil inorganic white
Lubrication of plastic/plastic and plastic/metal pairings, such as sealings, bearings, Temperature range in °C NLGI-grade Base oil viscosity at 40°C [mm2/s]
guiding devices, plastic-coated Bowden cables. Suitable for drinking water fittings. -40 / +175 1-2 750
elastomers. Sealing agent for taps and valves. Insulation of electric systems and -40 / +200 3-4 10000
installations. Serves as a humidity protector and is suitable for applications
in gas units.
Oxygen pastes
............................................................................................................
............................................................................................................
gleitmo 591 (OX) • 593 (OX) ............................................................................................................
............................................................................................................
Colour Base oil Thickener Solid lubricants NLGI-grade
Oxygen-resistant paste, white synthetic PTFE white 2
tested at >60 bar at 60°C oxygen temperature Temperature range in °C
For oxygen applications. Resistant to many aggressive chemicals and excellent gleitmo 591 (OX) -25 / +260
compatibility with various types of rubbers and plastics. gleitmo 593 (OX) -25 / +250
FUCHS LUBRITECH GMBH 27
PASTES AND GREASE PASTES Oxygen pastes
.......................................................................................................................................
.......................................................................................................................................
gleitmo 820 .......................................................................................................................................
.......................................................................................................................................
Colour Base oil Thickener Solid lubricants
White paste for hot forming white mineral oil - white
gleitmo 820 is used for drop forging, hot extrusion, hot rolling, hot bending. Also Temperature range in °C NLGI-grade
ideal for lubricating the column guides of the presses. -20 / +1150 1-2
.......................................................................................................................................
.......................................................................................................................................
gleitmo 821 .......................................................................................................................................
.......................................................................................................................................
Colour Base oil Thickener Solid lubricants
White lubricating fluid for hot forming white mineral oil - white
gleitmo 821 is used for drop forging, hot extrusion, hot rolling, hot bending. Can Temperature range in °C NLGI-grade
.......................................................................................................................................
.......................................................................................................................................
gleitmo 830 .......................................................................................................................................
.......................................................................................................................................
Colour Base oil Thickener Solid lubricants
White solid lubricant paste for cold forming cream-coloured mineral oil - white
gleitmo 830 is used in cold forming processes, where commonly used lubricants are Temperature range in °C NLGI-grade
not satisfactory. gleitmo 830 is proven for most demanding requirements in stam- -25 / +100 2
ping, drawing, stretch-forming, bending, rolling, and forming of profiles. gleitmo
830 is suitable for different materials such as austenitic and ferritic steels, copper,
aluminium, zinc and their alloys.
28 FUCHS LUBRITECH GMBH
HMP FILMS AND SOLID FILM LUBRICANTS
HMP films
.......................................................................................................................................
.......................................................................................................................................
gleitmo 300 .......................................................................................................................................
.......................................................................................................................................
Colour Temperature range in °C
Grease and oil-free lubricant film colourless, transparent -40 / +50
Solvent-containing universal lubricant for industrial and household applications. For pH-value Coefficient of friction1) Thinner
calibration, switches and mechanisms of any kind. For plastics, elastomers, zippers, - - -
blinds, window fittings, screws etc.
.......................................................................................................................................
.......................................................................................................................................
gleitmo 603 .......................................................................................................................................
.......................................................................................................................................
Colour Temperature range in °C
Dry film lubricant for coating of mass parts colourless -40 / +80
For mass part coating of nuts and bolts in the automotive industry. To obtain friction pH-value Coefficient of friction1) Thinner
coefficients with small scattering ranges at an elevated level of friction coefficients. 8.5-9.5 0.15 drinking water
screws, rivets, sheet metal screws, chipboard screws and O-ring assembly. 5.0-6.0 0.09 drinking water
screws, rivets, sheet metal screws, chipboard screws. 5.0-6.0 0.08 drinking water
Approvals/Recommendations: VOLKSWAGEN
.......................................................................................................................................
.......................................................................................................................................
gleitmo 627 .......................................................................................................................................
.......................................................................................................................................
Colour Temperature range in °C
Dry film lubricant with PTFE for coating of mass parts silk dull -40 / +110
For lubrication of stainless steel nuts and bolts, thread-forming and self-tapping pH-value Coefficient of friction1) Thinner
screws, rivets, sheet metal screws. To obtain very uninform friction coefficients. 5.0-6.0 0.08 drinking water
............................................................................................................................
............................................................................................................................
gleitmo HMP 8420 ............................................................................................................................
............................................................................................................................
Colour Temperature range in °C
Dry film lubricant with anti-corrosion sealer colourless, bright -40 / +110
For mass part coating of nuts and bolts in the automotive industry. To obtain fric- pH-value Coefficient of friction1) Thinner
tion coefficiants with small scattering ranges as per VDA requirements (association 8.5-9.5 0.10-0.11 drinking water
of German automotive industry) in combination with an excellent corrosion pro-
tection on zinc and zinc-alloy coatings.
............................................................................................................................
............................................................................................................................
gleitmo HMP 8040 ............................................................................................................................
............................................................................................................................
Colour Temperature range in °C
Dry film lubricant for coating of mass parts silk dull -40 / +110
pH-value Coefficient of friction1) Thinner
For mass part coating of thread-forming and self-tapping screws. 5.0-6.0 0.09 drinking water
............................................................................................................................
............................................................................................................................
gleitmo HMP 9020 ............................................................................................................................
............................................................................................................................
Colour Temperature range in °C
MoS2 dry film lubricant black -70 / +350
For the lubrication of mass parts like stud-bolts, nuts, sheet metal screws and ten- pH-value Coefficient of friction1) Thinner
sion springs. For hot galvanized screws, the standard DIN EN ISO 14399 is met by 8.0 0.09 drinking water
using gleitmo HMP 9020 as lubricating coating.
........................................................................................................................
........................................................................................................................
gleitmo HMP 9020 K ........................................................................................................................
........................................................................................................................
Colour Temperature range in °C
MoS2-dry film lubricant black -70 / +250
gleitmo HMP 9020 K is suitable for the lubrication of mass parts like stud-bolts, pH-value Coefficient of friction1) Thinner
nuts, sheet metal screws and tension springs. For hot galvanized high-tensile fa- 8.0 0.11 drinking water
steners, the standard for lubricant requirements DIN EN 14399 is fulfilled by using
of gleitmo HMP 9020 K. gleitmo HMP 9020 K is an advance development of
gleitmo HMP 9020 with enhanced corrosion protection properties.
............................................................................................................................
............................................................................................................................
gleitmo HMP 9021 ............................................................................................................................
............................................................................................................................
Colour Temperature range in °C
MoS2 dry film lubricant black -70 / +350
pH-value Coefficient of friction1) Thinner
For lubrication of mass parts like stud-bolts, nuts, sheet metal screws and tension 8.0 0.09 drinking water
springs. For hot galvanized high-tensile fasteners, the the standard for lubricant
requirements DIN EN ISO 14399 is met by using gleitmo HMP 9020.
1)µ value at the initial tightening strain, mixture ratio 1:3, bolt test according to DIN EN ISO 16047 with DIN 933 M 12, 8.8 Zn screws. Tightening strain of 75 % of the material elastic limit.
Further friction coefficients available on request.
30 FUCHS LUBRITECH GMBH
Cleaning agents for HMP films HMP FILMS AND SOLID FILM LUBRICANTS
.....................................................................................................................
.....................................................................................................................
gleitmo HMP CLEANER .....................................................................................................................
.....................................................................................................................
For dry lubrication of nuts and bolts made of stainless steel, cylinder head screws, grey-black -180 / +400 MoS2, graphite approx. 15
dowel pins. For cold forming e.g. cold extrusion as well as for joint bearings Binder Thinner
.......................................................................................................................................
.......................................................................................................................................
gleitmo 960 .......................................................................................................................................
.......................................................................................................................................
.......................................................................................................................................
.......................................................................................................................................
gleitmo 980 .......................................................................................................................................
.......................................................................................................................................
..............................................................................................................................
..............................................................................................................................
gleitmo SFL 9540 ..............................................................................................................................
..............................................................................................................................
..............................................................................................................................
..............................................................................................................................
gleitmo SFL 9550 ..............................................................................................................................
..............................................................................................................................
..............................................................................................................................
..............................................................................................................................
gleitmo SFL 9560 ..............................................................................................................................
..............................................................................................................................
FUCHS LUBRITECH GMBH 31
HMP FILMS AND SOLID FILM LUBRICANTS Solvent-based Solid Film Lubricants
..............................................................................................................................
..............................................................................................................................
gleitmo SFL 9563 ..............................................................................................................................
..............................................................................................................................
For lifetime lubrication of machine elements at average pressures (plain bearings, black -70 / +200 PTFE, MoS2 approx. 10
spindles, slid rails, etc.) requiring dry lubrication and good corrosion protection. Binder Thinner
organic gleitmo 950 V
..............................................................................................................................
..............................................................................................................................
gleitmo SFL 9580 ..............................................................................................................................
..............................................................................................................................
Highly efficient non-stick coating for metallic materials. For dry lubrication of com- black -70/+250 PTFE approx. 10
ponents under low loads. Binder Thinner
an-/organic gleitmo 950 V
..............................................................................................................................
..............................................................................................................................
gleitmo SFL 9680 ..............................................................................................................................
..............................................................................................................................
For dry lubrication of elastomers (O-rings, profiles). Enables very low friction coef- transparent, colourless -70 / +180 - 20
ficients thus facilitating assembly. Binder Thinner
in-/organic METABLANC V-901
For dry lubrication of nuts and bolts made of stainless steel, cylinder head screws, grey-black -180 / +400 MoS2, graphite approx. 20
cylinder head gaskets, dowel pins as well as for cold forming e.g. cold extrusion. Binder Thinner
inorganic deionised water
.......................................................................................................................................
.......................................................................................................................................
gleitmo 925 .......................................................................................................................................
.......................................................................................................................................
For lubrication of screws, thrust washers, disc springs, gear wheels, bearing pins, grey-black -180 / +250 MoS2, graphite approx. 25
slide rails and for metal forming. Binder Thinner
organic deionised water
Approvals/Recommendations: Volvo Car Germany
...............................................................................................................................
...............................................................................................................................
gleitmo SFL 9025 ...............................................................................................................................
...............................................................................................................................
.......................................................................................................................................
.......................................................................................................................................
gleitmo 985 .......................................................................................................................................
.......................................................................................................................................
Temperature Solid Yield in m2 / Liter
Air drying PTFE Solid Film Lubricant Colour range in °C lubricants Solid Film Lubricant
For dry lubrication of metals (fasteners), plastics and elastomers under low loads. silk dull -180 / +250 PTFE approx. 20
Initial lubrication of injection-moulded parts (cams, stop levers, stop guides). Also Binder Thinner
suitable for use in the food industry. organic deionised water
32 FUCHS LUBRITECH GMBH
Water-based Solid Film Lubricants HMP FILMS AND SOLID FILM LUBRICANTS
..............................................................................................................................
..............................................................................................................................
gleitmo SFL 9085 ..............................................................................................................................
..............................................................................................................................
Temperature Solid Yield in m2 / Liter
Air drying MoS2 Solid Film Lubricant Colour range in °C lubricants Solid Film Lubricant
For dry lubrication of metals (fasteners), plastics and elastomers under low loads. silk dull -180 / +250 PTFE approx. 20
Initial lubrication of injection-moulded parts (cams, stop levers, stop guides). Binder Thinner
organic deionised water
..............................................................................................................................
..............................................................................................................................
gleitmo SFL 9070 ..............................................................................................................................
..............................................................................................................................
Temperature Solid Yield in m2 / Liter
Thermosetting PTFE Solid Film Lubricant Colour range in °C lubricants Solid Film Lubricant
For dry coating of various material combinations especially of plastics, rubbers and colourless, milky -70 / +180 PTFE approx. 10
leatherr. Allows smooth running, protects against wear, and prevents squeaking Binder Thinner
noise caused by stick slip of plastic combinations in a car´s interior. organic deionised water
..............................................................................................................................
..............................................................................................................................
gleitmo SFL 9065 ..............................................................................................................................
..............................................................................................................................
Temperature Solid Yield in m2 / Liter
Thermosetting PTFE Solid Film Lubricant Colour range in °C lubricants Solid Film Lubricant
For lifetime lubrication of components where high requirements have to be met in grey-black -180/+250 PTFE approx. 10-15
terms of wear resistance combined with good corrosion protection. Furthermore gleit- Binder Thinner
mo SFL 9065 can be used to coat mass parts (pins, screws/bolts, disc springs, etc.). organic drinking water
..................................................................................................................................
..................................................................................................................................
gleitmo 2332 V ..................................................................................................................................
..................................................................................................................................
For dry lubrication of screws used in high-temperature applications (e.g. car exhaust grey-black -180 / +1200°C Special approx. 15
systems). Enables easy loosening after thermal stress. Binder Thinner
an-/organic deionised water
..............................................................................................................................
..............................................................................................................................
gleitmo RLC 3000 ..............................................................................................................................
..............................................................................................................................
for drinking water applications colourless, milky -70 / +250 PTFE approx. 10
For dry lubrication of seals in drinking water applications. gleitmo RLC 3000 meets Binder Thinner
the requirements of the German Federal Environmental Agency (”UBA”) for orga- organic drinking water
nic coatings in drinking water applications. For dry lubrication of different material
combinations, e.g. of metals, plastics, rubbers.
For lubrication of elastomers and polymer materials gleitmo RLC 3100 can be col- colourless, milky -70 / +250 PTFE approx. 20
oured with colour additives from the “gleitmo Colour“ range in order to Binder Thinner
.......................................................................................................................
.......................................................................................................................
gleitmo Colour range .......................................................................................................................
.......................................................................................................................
The gleitmo Colour range includes concentrates for the colouring of water-based Colour code Colour
gleitmo Solid Film Lubricants (e.g. gleitmo RLC 3100). The pigment makes it easier BL 01 black
to provide evidence of coating on coated parts and allows homogeneous, coloured BU 01 blue
coatings. GN 01 green
RD 01 red
WH 01 white
YE 01 yellow
FUCHS LUBRITECH GMBH 33
RUST LOOSENERS AND TECHNO-CHEMICAL PRODUCTS
Rust looseners
.............................................................................................................................
.............................................................................................................................
FERROFORM LOCC .............................................................................................................................
.............................................................................................................................
Colour Base oil
Rapid rust loosener based on mineral oil light coloured mineral oil
For non-destructive loosening of rusted and seized connections. Creeps under
water. As rust loosener, fine lubricant and slight protection against corrosion for all
technical and household areas.
.....................................................................................................................
.....................................................................................................................
FERROFORM ECO LOCC .....................................................................................................................
.....................................................................................................................
Colour Base oil
Eco-friendly synthetic rapid rust loosener yellowish synthetic
Application areas like FERROFORM LOCC.
...........................................................................................................
...........................................................................................................
FERROFORM ECO 871 SPRAY ...........................................................................................................
...........................................................................................................
Colour Base oil
Eco-friendly synthetic rapid rust loosener greenish clear synthetic
For non-destructive loosening of rusted and seized connections, knuckle joints,
levers, contacts etc. Displaces water. Exceptional creep properties and high lubri-
cation efficiency. Available only as a spray.
........................................................................................................................
........................................................................................................................
FERROFORM SUPER 7 ........................................................................................................................
........................................................................................................................
Colour Base oil
Special rust loosener with solid lubricant package black mineral oil
Multi purpose rust loosener incorporating a combination of resin and acid free
penetrating oils. Ideal for repairing and maintaining severely rusted and seized parts
in mechanical components and hydraulic equipment.
34 FUCHS LUBRITECH GMBH
Corrosion protection
media RUST LOOSENERS AND TECHNO-CHEMICAL PRODUCTS
.................................................................................................................................
.................................................................................................................................
DECORDYN ECO .................................................................................................................................
.................................................................................................................................
Preservation fluid
For preserving precision equipment, tools and devices. It‘s compatibility with relubricating agents guarantees that the preserved parts are
ready for installation without further cleaning. Only available as a spray.
..................................................................................................................................
..................................................................................................................................
DECORDYN 350 ..................................................................................................................................
..................................................................................................................................
Cleaners
.......................................................................................................................................
.......................................................................................................................................
METABLANC .......................................................................................................................................
.......................................................................................................................................
FUCHS LUBRITECH GMBH 35
RUST LOOSENERS AND TECHNO-CHEMICAL PRODUCTS Solid lubricant powders
.......................................................................................................................
.......................................................................................................................
POWDER GRAPHITE F .......................................................................................................................
.......................................................................................................................
Colour Bulk weight g/dm³ Purity in %
POWDER GRAPHITE F is used as a solid lubricant for liquid and pasty lubricants, black 140 99.5
plastics and sliding materials. Ambient temperature Press fit test,
in °C stat. fricition coefficient
- -
................................................................................................................................
................................................................................................................................
POWDER MoS2 F ................................................................................................................................
................................................................................................................................
Colour Bulk weight g/dm³ Purity in %
POWDER MoS2 F is used for cold forming and dry lubrication, if lubrication with grey-blue - -
oils or greases is not possible. For incorporation in plastics, carbon products, Ambient temperature Press fit test,
in °C stat. fricition coefficient
powder metals and lubricants. For economical application on small mass parts.
-180/+400 approx. 40
.................................................................................................................................
.................................................................................................................................
POWDER MoS2 S .................................................................................................................................
.................................................................................................................................
Colour Bulk weight g/dm³ Purity in %
POWDER MoS2 S is used for cold forming and dry lubrication, if lubrication with grey-blue - -
oils or greases is not possible. For incorporation in plastics, carbon products, Ambient temperature Press fit test,
in °C stat. fricition coefficient
powder metals and lubricants. For economical application on small mass parts.
-180/+350 approx. 15
36 FUCHS LUBRITECH GMBH
GREASE GUNS FOR SR-SCREW CARTRIDGES
............................................................................................................
............................................................................................................
HD-Two-handed grease gun ............................................................................................................
............................................................................................................
For easy, clean and accurate lubrication of high-quality machines with long lubri-
cating lines, large quantities of lubricant and large volumes of lubricant per stroke.
Obtainable pressure: 400 bar. TÜV (German technical inspecting agency)
approved and with GS mark.
■ Weight:950 g only
■ Maximum obtainable pressure: 400 bar
■ Complete discharge of the SR cartridge by special piston shape
..............................................................................................................
..............................................................................................................
Single-handed grease gun ..............................................................................................................
..............................................................................................................
For easy, clean and accurate lubrication of high-quality machines. TÜV (German
technical inspecting agency) approved and with GS mark.
................................................................................................
................................................................................................
DFP 500/FLT pneumatic grease gun ................................................................................................
................................................................................................
The professional pneumatic grease gun is the ideal solution to lubricate all kinds of
machinery, commercial vehicles and construction machinery. It is supplied with
reinforced rubber hose and 4-jawed professional nozzle.
■ Practicalsingle-hand operation
■ Controlled grease feed using a single outlet
■ Approx. 1.2 cm³/stroke at 250 bar
■ Input pressure 2-10 bar, transmission ratio 1:30
■ Connecting thread M 10x1
FUCHS LUBRITECH GMBH 37
NOTES
38 FUCHS LUBRITECH GMBH
The information contained in this product information is based on the expe- criteria of the products before the product is used. It is the responsibility of