Professional Documents
Culture Documents
ICON KEY
Paint Roller
Brush
Airless Trowel
Spray
Hand Non
Scatter Drying
Touch Hard
Dry Dry
Overcoat Overnight
Times
Colour
Colours shown are an approximate representation only. For exact colour reference please see the Coo-Var colour card or contact us on +44 (0)1482 328053.
Coverage
The practical spreading rate may be lower as it depends on factors such as porosity and roughness of the surface to be painted as well as material losses during
application.
Drying Time
Low temperature and high humidity will adversely affect application, drying time and performance of any coating.
VOC Statement
VOCs (Volatile Organic Compounds) contribute to atmospheric pollution. This is stated on the tin label and Technical Data Sheet for every product. If you have any
questions regarding Coo-Var products please contact us on +44 (0)1482 328053.
Floor Sealer ................................................ 6 Profloor Plus Fast Hardening .......... 8 Low Odour Line Marking ........... 10
Acrylic Floor Paint .................................. 6 Profloor Plus Cold Cure ...................... 8 Acrylic Line Marking Paint ....... 10
Floor Paint .................................................... 6 Guard-Coat Anti-Microbial ............. 8 Roadline Aerosol ............................... 10
High Performance Primer .................. 6 Power Floated Floor Primer .............. 8 Anti-Slip Step & Ramp .................. 10
Profloor ........................................................................... 7 Anti-Slip Acrylic Floor Paint ...... 9 Squash Court Paint .......................... 11
Profloor Anti-Slip Aggregate ............ 7 Suregrip Anti-Slip ............................................... 9 Tennis Court and Drive Paint .. 11
Profloor Plus ............................................................. 7 Polyurethane Varnish - 2 Pack .... 9 Teamac Chlorvar Chlorinated
Profloor Plus Anti-Slip A’gate ......... 7 Clear Glaze For Floors ................. 9 Rubber Swimming Pool Paint 11
Hammercote Thinners
V607/15 Oil Remover
THINNERS/BRUSHWASH
Q227/1 CLEANING
For use with Hammercote. TIN SIZES:
A water based, environmentally TIN SIZES:
250ml, 500ml, friendly cleaner with powerful
1L, 2.5L 5L
cleaning and degreasing
COLOURS: properties. Use to degrease and COLOURS:
remove oil from the surface prior
Clear thin liquid to acid etching or painting. Part Clear thin liquid
Chlorvar Thinners 15
V607/15 Universal Degreaser/Cleaner
THINNERS/BRUSHWASH V607/15 CLEANING
For use with Chlorvar TIN SIZES:
Chlorinated Rubber Paint. A careful blend of solvents to TIN SIZES:
1L, 2.5L give powerful cleaning and
2.5L
COLOURS: degreasing properties. Use to
degrease and remove oil etc from COLOURS:
Clear thin liquid the surface prior to acid etching
or painting. Part of the cleaning Clear thin liquid
ESTIMATED 7
floors to create ‘key’. Dilute 3 COVERAGE: m²/l
For Low Odour Line Marking TIN SIZES: parts water/1 part Acid Etch. (once diluted) depending on porosity
Paint. and dilution.
2.5L BRUSHWASH/THINNERS: WATER
COLOURS: SPECIAL NOTES:
Essential for good adhesion of paint.
Clear thin liquid
DRYING Clear
• Works particularly well as a Clear
TIME: 24hrs FINISH: system underneath Coo-Var FINISH:
OFF GLOSS Profloor Plus. GLOSS
OVERCOAT 24hrs 48hrs APPLICATION: SUITABLE SURFACES: APPLICATION:
TIME: Min Max
CONCRETE FLOORS, SCREEDS, VINYL
Pot Life: 50 minutes @ 20°C TILES & OTHER DIFFICULT SURFACES
ESTIMATED 16 ESTIMATED 20
BRUSHWASH/THINNERS: THINNERS 16
COVERAGE: m² PER MIXED UNIT DRYING COVERAGE: m² PER MIXED UNIT
Recommended Dried TIME: Recommended Dried
24hrs
Film Thickness Per Coat: Film Thickness Per Coat:
220 microns OVERCOAT 12hrs 48hrs 230 microns
SPECIAL NOTES: TIME:
Surface must be of sufficient quality Recommended Wet Film Min Max Recommended Wet Film
and mechanical strength to ensure an Thickness Per Coat: Pot Life: 30 minutes @ 20°C Thickness Per Coat:
even coating. 220 microns 230 microns
BRUSHWASH: THINNERS 16 (Do not thin)
SPECIAL NOTES:
Surface must be of sufficient quality
Floorpack Concrete Repair and mechanical strength to ensure an
even coating.
Mortar On ‘difficult’ surfaces, eg tiles test
Dampshield and topcoat on small area.
Q265/1 REPAIR
A solvent free, heavy duty two TIN SIZES:
pack mortar kit. Ideal for repairs
5kg CSP Cold Mortar
to areas and floors subject to M200
high impact, abrasive or COLOURS: REPAIR
chemically corrosive conditions. A repair mortar specifically TIN SIZES:
Can repair large voids in Dark
designed for use in cold rooms to
concrete beams, floors or precast
Grey
5.5kg, 12.5kg
FINISH: repair cracks and holes. Ideal for
units. SMOOTH use when cold rooms cannot be COLOURS:
APPLICATION: turned off.
• Can be used in damper To be applied in layers Natural
conditions and lower with a trowel • Cures at temperatures as low FINISH:
temperatures than some systems ESTIMATED 0.5 @5mm as -35°C ROUGH IF A LARGE
COVERAGE: m²/l per kit QUANTITY USED
SUITABLE SURFACES: SUITABLE SURFACES:
BRICK, MASONRY, CONCRETE
Recommended Dried APPLICATION:
Film Thickness Per Coat: BRICK, MASONRY, CONCRETE
DRYING Mortar Pot Life: 1 hr 4.5mm depending on DRYING Mortar Pot Life: 10-15 minutes
TIME: Initial Cure: 3-12 hrs application TIME: stored at ambient temperature ESTIMATED
Full Cure: 3-10 days (once mixed) COVERAGE:
TROWEL WASH/SMOOTHING: Full Cure at -20°C: 5 hrs 5.5kg 12.5kg
THINNERS 16 Full Cure at -30°C: 12 hrs 0.5 1.25
m² @5mm m² @5mm
Ideal for use in hospitals, clinics, Tile Yellow Green L Grey Grey Black FINISH:
Red 00A05 SEMI-GLOSS
commercial kitchens etc. Reduce • Low odour & solvent free
APPLICATION:
scuffs on walls from chairs/beds. White Clear SUITABLE SURFACES: Shortpile
CONCRETE roller
• Anti-baterial properties FINISH:
OFF GLOSS ESTIMATED 7-10
• Very hard wearing ANTI-SLIP IS AGGREGATED DRYING Full Cure: COVERAGE: m²/kg
• For interior and exterior use APPLICATION: TIME: 2-3hrs 16hrs
5-7 days
Recommended Dried
SUITABLE SURFACES: Shortpile OVERCOAT Film Thickness Per Coat:
16hrs 7days
WOOD, CONCRETE, MASONRY, ASPHALT
roller
TIME: 45 microns
ESTIMATED 6-10 Min Max
Recommended Wet Film
DRYING Full Cure: COVERAGE: m²/kg Pot Life: 90-120 minutes @ 20°C Thickness Per Coat:
TIME: 4hrs 8-12hrs
5-7 days
Recommended Dried BRUSHWASH/THINNERS: WATER 100 microns
Film Thickness Per Coat:
OVERCOAT 16hrs 7days
35-70 microns SPECIAL NOTES:
TIME: Surface must be laitance free before
Min Max Recommended Wet Film
application. Dilute with 10% water.
Pot Life: 2-4 hours @ 20°C Thickness Per Coat:
SC
Do not apply at temperatures below
100 microns 10°C
BRUSHWASH/THINNERS: WATER
SPECIAL NOTES:
Requires professional application.
SPECIAL NOTES:
Not suitable for use when temperature
is below 7°C. SC
SC
PTV Risk* For Floor Paints
Floor Paint Product Risk For Slip Potential in Dry Risk For Slip Potential in Wet
Conditions Conditions
Acrylic Floor Paint Low Moderate
Acrylic Floor Paint Clear Low Moderate
Acrylic Floor Paint Clear With Aggregate Low Low
Anti Slip Acrylic Floor Paint Low Low
Floor Paint Low High
Low Odour Line Marking Paint Low Low
Polyurethane Floor Finish Low Moderate
Profloor Plus With Anti Slip Low Low
Profloor With Anti Slip Low Low
Step & Ramp Paint Low Low
Suregrip® Low Low
Tennis Court & Drive Paint Low Low
*All products tested to BS7976 -2 Pendulum Slip Test for a copy of the report please contact info@coo-var.co.uk or call 01482 328053.
down pipes, walls, gutters, garage (4kg only) money. Check small area first if FINISH:
GLOSS, MATT
roofs or anywhere which may be FINISH: applying to plastic, metal or paint.
SEMI-MATT APPLICATION:
used as a grip point. Also contains
APPLICATION: • Fast drying - apply two coats in
a hidden identifier.
one day
ESTIMATED 8-10
• Remains tacky • Wash off graffiti using only COVERAGE: m²/l
• Deterrent poster available ESTIMATED 2 water!
COVERAGE: m²/kg Recommended Dried
Recommended Film SUITABLE SURFACES: Film Thickness Per Coat:
SUITABLE SURFACES: 55 microns
WOOD, METAL, MASONRY Thickness Per Coat: CONCRETE, METAL, MASONRY
0.5mm Recommended Wet Film
DRYING DRYING Thickness Per Coat:
TIME: TIME: 1-2hrs 2.5hrs
100 microns
SPECIAL NOTES:
Suregrip® Anti-Slip Floor Paint
Can be applied to unpainted surfaces G139
and water based paints. SC A ready mixed, single pack
SAFETY PRODUCT
TIN SIZES:
aggregated floor paint. Provides
1L, 2.5L, 5L
a rough, anti-slip finish which
Anti-Graffiti Brushwash helps to prevent slips and falls. COLOURS:
Q607/7 For foot and light truck traffic,
SECURITY PRODUCT
inside or outside. Ideal around Tile Yellow Green Blue
Red
Light Dark
Grey Grey
A brushwash and thinning agent TIN SIZES: machinery, car pits, on ramps
for P101 Anti-graffiti Coating. and door steps.
Use to thin the first coat as
500ml, 5L Black White Buttermilk
Glocote Protective
for Fluorescent Paint
V601 SAFETY PRODUCT
Provides a clear glaze to protect TIN SIZES:
the colour and finish of Glocote
500ml, 1L, 2.5L, 5L
Fluorescent Paint. Also protects
from the weather. COLOURS:
Clear Protective
for Luminous Paint
W462 SAFETY PRODUCT
Provides a clear glaze to protect TIN SIZES:
the finish and effectiveness of
500ml, 2.5L
Luminous Paint. Also protects
from the weather. COLOURS:
SPECIAL NOTES:
Not suitable for unstable surfaces. Glass Shading
Do not use in cold/damp conditions.
W454/1 FOR GLASS
A water based paste for dilution. TIN SIZES:
Brilliant Aluminium Paint Ideal to black out excess light
and heat in factories and
2.5L
A303/3 MULTI PURPOSE COATINGS greenhouses. Helps reduce COLOURS:
interior temperature.
An alkyd based coating which TIN SIZES: White
contains a metallic aluminium • Apply direct FINISH:
1L, 2.5L, 5L
giving a brilliant silver finish. SUITABLE SURFACES: MATT
Can be used as a heat and light COLOURS: GLASS APPLICATION:
reflective protective finish. For
DRYING
use on car wheels, hot water Silver
TIME: ESTIMATED 20
pipes, radiators & metal car FINISH: 1-2hrs
COVERAGE: m²/l
HIGH METALLIC SHEEN
components. BRUSHWASH/THINNERS: WATER Recommended Dried
APPLICATION:
Film Thickness Per Coat:
• Apply direct 10-20 microns
• Heat resistant up to 150°C SPECIAL NOTES:
ESTIMATED 15-20 Mix to desired opacity but as a guide: Recommended Wet Film
COVERAGE: m²/l 20 m²/l @ 2 parts paste to 1 part Thickness Per Coat:
SUITABLE SURFACES: 50 microns
Recommended Dried water.
WOOD, METAL
Film Thickness Per Coat:
DRYING 20-25 microns
TIME: 3hrs 12hrs
Recommended Wet Film
Thickness Per Coat:
OVERCOAT 12hrs or 50-60 microns
TIME:
FINISH: FINISH:
• For interior use only MATT DRYING MATT (SLIGHTLY TEXTURED)
• Can be overcoated to acheive APPLICATION: TIME: Can be overcoated with
2hrs 4hrs emulsion or acrylic paint.
other colours
OVERCOAT APPLICATION:
SUITABLE SURFACES: ESTIMATED 10
TIME: 4hrs
DRYING ESTIMATED 14
TIME: 4hrs 12hrs COVERAGE: m²/l
OVERCOAT Recommended Dried
12hrs or
TIME: Film Thickness Per Coat:
30-35 microns
BRUSHWASH/THINNERS: WHITE SPIRIT
Recommended Wet Film
Thickness Per Coat:
70 microns
SPECIAL NOTES:
Apply direct.
Ideal in coastal areas due to its
Polyurethane Varnish - Two Pack
hard-wearing nature. P101/POLY WOOD PROTECTION
An exceptionally durable varnish TIN SIZES:
which will not fade or yellow if
Polyurethane Varnish on an item placed near a
5kg Mixed Unit
window. Ideal for use on bar COLOURS:
V606 WOOD PROTECTION tops, furniture and floors.
A single pack urethane product TIN SIZES: • Does not support fungus
Clear
SPECIAL NOTES:
Ensure surface is dry for 1-2 weeks
prior to coating.
Apply direct.
SPECIAL NOTES:
Zinc Phosphate Primer Store away from frost. Do not use in
temperatures below 7°C.
P201 FOR METAL
A high performance metal TIN SIZES:
primer for use on metals including
500ml, 1L, 2.5L, 5L Red Oxide Metal Primer
aluminium, iron and steel. Suit- F158/65
able for use on combined wood/ COLOURS: FOR METAL
metal as it will prime both surfac- A good, general purpose metal TIN SIZES:
es. Ideal for fire escapes, window Grey
primer ideal for ferrous metallic
frames, metal gates/doors etc. FINISH: 500ml, 1L, 2.5L, 5L
SEMI-MATT
surfaces.
COLOURS:
• For interior and exterior use APPLICATION: • Good anti-corrosive properties
• High durability primer - ideal
SUITABLE SURFACES: Red
in coastal areas FERROUS METALS FINISH:
ESTIMATED 13
SUITABLE SURFACES: COVERAGE: m²/l MATT
DRYING APPLICATION:
METAL Recommended Dried
TIME:
Film Thickness Per Coat: 2hrs 12hrs
DRYING 35-40 microns OVERCOAT 12hrs or
TIME: Recommended Wet Film ESTIMATED 13
2hrs 12hrs TIME:
COVERAGE: m²/l
OVERCOAT Thickness Per Coat:
12hrs or
75 microns Recommended Dried
TIME:
Film Thickness Per Coat:
BRUSHWASH/THINNERS: WHITE SPIRIT 35-40 microns
Recommended Wet Film
SPECIAL NOTES:
Thickness Per Coat:
Do not use with Hammercote.
‘Rapidry’ version available for use BRUSHWASH/THINNERS: WHITE SPIRIT 75 microns
under Coo-Var Hammercote.
Accessories
and
Promotional
Aids
Along with paint, Coo-Var also stock other items that may be of use to you or your customers. For a full list,
see the pricelist or contact the sales office.
In store promotional items that catch the eye will improve brand awareness and increase sales. To help you
make the most of your Coo-Var stock, we have many promotional aids available; here are just a few:-
easy attchment to fences etc. and Repair Line Marking Security for Metal Paints and Oils Primers