Professional Documents
Culture Documents
6.1.3. Materials:
Paint Decorative/Iron/Wood: ex Propan/Jotun/Dulux ICI/Nippon
Wood Finishing (Varnish): ex Propan Raya/equivalent
a. Paint Iron/Steel/Metal that will be painted must be cleaned of rust, oil and
the crust by means of rubbing, scrubbing with a steel brush, metal, then it
should be covered with paint meni, priming and final paint with layers as
follows:
1. Paint for steel/metal interior Oil Paint:
When the iron/steel/metal still rusty, apply first the Rost-X 77 (2 x
lapis) prior to application of the primer.
• one (1) coats of Primary = Alkyd Primer AP-291 Zinc Chromate
(1x 40 microns dry) green primary) – for a non galvanized iron
• two (2) coats of Top Coat = Synthetic 2000 (2 x 40 microns
dry)
Finish: Gloss.
b. Weather-Resistant Paint
- Level of Gloss : Matt Finish
- Primary : 1 (one) layers of Décor of Alkali Resisting
Primer AR-300 (Water Based)
- Top Coat : 2 (two) layers of Decorshield DW-500 Acrylic
Weather Shield.
- Warranty : 6 (six) years
- Certificate Of The Singapore Green Label
2. Clear PU Paint
For frames and wooden doors (interior), with the appearance
of veins wood
- Putty : Impra Wood Filler SH–113 or WF–115 color
- Wood Stain : Impra Wood Stain WS–162 B Colour
- Sanding Sealer : 2 (two) layers of Propan PU Polyurethane
Sanding Sealer PUSS – 741
- Top Coat : Propan PU Polyurethane Lacquer PUL-41
Clear Gloss / Clear Semi Gloss / Clear Doff
i. Floor Paint
1. For the Painting Ground Water Tanks/GWT (Reserve Water storage
tanks) or Sewage Treatment Plant/STP (sewage treatment)
- Epoxy Sealer : Polyfloor Epoxy Cement PFC-225 sealer
- Epoxy Cement : Polyfloor Epoxy Cement PFC-225/235
- Primer Coat : Polyfloor Epoxy Primer PFP-241
- First Coat : Polyfloor Epoxy Floor Topping PFT-223 SF
- Finish Coat : Polyfloor Epoxy Floor Topping PFT-223 SF
3. For Painting the floor space of the AHU, Genset, and emergency stairs
as Dustproof Paint
- Primer Coat : Polyfloor Epoxy Primer PFP-241
- Finish Coat : Polyfloor Epoxy Flooring Topping PFT-253
- Total Thickness : ± 500 micron
6.1.4. Implementation:
1. Paint the wall/wall
a. Before painting the wall started the contractor must make. Examples of
color to the field for the board of directors approved
b. The contractor should carry out painting over all. The surface according to
the rules that are described by the manufacturer paint makers
3. Wooden Menie
a. This is a job which included repainting the entire surface of multiplek
plywood that will frame, painted ceiling (if any), door-frames or other
parts of the specified picture.
b. Menie used was menie wood.
c. All wood should only be coated in the menie project footprint and got the
approval of the planner/deputy giver task.
d. Before the job was done menie/field of rough wood must be mashed with
sandpaper rough wood and fine wood sandpaper until the surface slick
field/flat.
e. Menie work done using brushes, layer, done in such a way so that the
field of wood covered with a layer of menie.
4. Ceiling
a. What is meant in the ceiling paint job is Gypsum Board ceiling, Concrete
Plates or other parts of the specified picture.
b. Cat used Cat Eco Gypsum (Gypsum) and Decorlotus for Concrete Plates.
c. For Painting Gypsum ceilings, there is a painting of the base in the form of
a white cat plafond with a basic 100% Acrylic Emulsion and has the power
to say and a good content resource. Priming is called the primary Gypsum
Eco Special Acrylic Emulsion Primer for Gypsum Board.
d. Connection-connection Gypsum Board should be given the compound so
as not to appear as cracks after painted.
e. For painting a concrete Plate, give 1 priming layer, paint in the form of
alkali resisting primer white that has a high alkaline durability, power and
power lid latched onto a fine as well as antifungal material levels high
enough. Priming is called Alkali Resisting Primer.