Professional Documents
Culture Documents
SS2-AGV200-0001
Spring
Air pressure
connection end of
air-fail-open model
Diaphragm:
cloth embedded
propylene rubber
Air pressure
connection end of Yoke: carbon steel
air-fail-close model A216WCB (SCPH2)
Scale plate:
n stainless steel
Stem connector
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
Table 11. Model AGVB nominal size 1-1/2, 2, 2-1/2, 3 and 4 inches
Air-to-open
Nominal Supply Spring Differential pressure (by port size (inch)) kPa {kgf/cm2}
size Actuator pressure range
1 1-1/4 1-1/2 2 2-1/2 3 4
(inch) kPa {kgf/cm2} kPa {kgf/cm2}
140 20 to 98 410 250 170 100 -- -- --
{1.4} {0.2 to 1.0} {4.2} {2.6} {1.8} {1.1}
PSA1R
270 80 to 240 1960 1780 1210 720 -- -- --
{2.8} {0.8 to 2.4} {20.0} {18.2} {12.3} {7.4}
140 20 to 98 800 490 330 200 -- -- --
{1.4} {0.2 to 1.0} {8.2} {5.0} {3.4} {2.0}
1-1/2 PSA2R
270 80 to 240 1960 1400
-- -- -- --
{2.8} {0.8 to 2.4} {20.0} {14.3}
2
140 20 to 98 1420 880 590 350 -- -- --
{1.4} {0.2 to 1.0} {14.5} {8.9} {6.0} {3.6}
PSA3R
270 80 to 240 1960
-- -- -- -- -- --
{2.8} {0.8 to 2.4} {20.0}
140 20 to 98 1960 1510 1030 610
PSA4R -- -- --
{2.8} {0.2 to 1.0} {20.0} {15.4} {10.5} {6.2}
140 20 to 98 590 350 220 160
-- -- --
{1.4} {0.2 to 1.0} {6.1} {3.6} {2.2} {1.6}
PSA3R
270 80 to 240 1960 1530 1100 620
-- --
{2.8} {0.8 to 2.4} {20.0} {15.6} {11.3} {6.3}
2-1/2 140 20 to 98 1030 610 380 270 150
-- --
{1.4} {0.2 to 1.0} {10.5} {6.2} {3.9} {2.8} {1.16}
3 PSA4R
270 80 to 240 1960 1910 1070
-- -- -- --
4 {2.8} {0.8 to 2.4} {20.0} {19.4} {10.9}
260 100 to 180 1960 1450
-- -- -- -- --
{2.6} {1.0 to 1.8} {20.0} {14.8}
PSA6R
400 200 to 340 1960
-- -- -- -- -- --
{4.0} {2.0 to 3.5} {20.0}
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
8
Azbil Corporation No. SS2-AGV200-0001
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
Table 13. Model AGVB nominal size 1-1/2, 2, 2-1/2, 3 and 4 inches
Air-to-close
Nominal Supply Spring Differential pressure (by port size (inch)) kPa{kgf/cm2}
size Actuator pressure range
1 1-1/4 1-1/2 2 2-1/2 3 4
(inch) kPa {kgf/cm2} kPa {kgf/cm2}
140 20 to 98 1030 640 430 260 -- -- --
{1.4} {0.2 to 1.0} {10.5} {6.5} {4.4} {2.6}
160 20 to 98 1860 1150 780 460
PSA1D -- -- --
{1.6} {0.2 to 1.0} {18.9} {11.7} {7.9} {4.7}
390 80 to 240 1500 -- -- --
{4.0} {0.8 to 2.4} {15.3}
140 20 to 98 1960 1230 840 500 -- -- --
{1.4} {0.2 to 1.0} {20.0} {12.6} {8.5} {5.1}
160 20 to 98 1510 900
1-1/2 PSA2D -- -- --
{1.6} {0.2 to 1.0} {15.4} {9.2}
2 390 80 to 240 1960
-- -- -- -- -- --
{4.0} {0.2 to 1.0} {20.0}
140 20 to 98 1960 1490 890
-- -- -- --
{1.4} {0.2 to 1.0} {20.0} {15.1} {9.0}
PSA3D
160 20 to 98 1600
-- -- -- -- --
{1.6} {0.2 to 1.0} 1960 {16.3}
140 20 to 98 {20.0} 1530
-- -- -- -- --
{1.4} {0.2 to 1.0} {15.6}
PSA4D
160 20 to 98 1960
-- -- -- -- -- --
{1.6} {0.2 to 1.0} {20.0}
140 20 to 98 1490 890 550 390 220
-- --
{1.4} {0.2 to 1.0} {15.1} {9.0} {5.6} {4.0} {2.3}
160 20 to 98 1600 990 710 400
PSA3D -- --
{1.6} {0.2 to 1.0} {16.3} {10.0} {7.2} {4.1}
2-1/2 390 80 to 240 1290
-- --
{4.0} {0.8 to 2.4} 1960 {13.1}
3 {20.0}
140 20 to 98 1530 950 680 380
-- --
4 {1.4} {0.2 to 1.0} {15.6} {9.6} {6.9} {3.9}
160 20 to 98 1960 1700 1230 700
PSA4D -- --
{1.6} {0.2 to 1.0} {20.0} {17.4} {12.5} {7.0}
390 80 to 240 1960
-- -- -- -- -- --
{4.0} {0.8 to 2.4} {20.0}
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2.The maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
9
No. SS2-AGV200-0001 Azbil Corporation
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
3. In the differential pressure column, upper figures show normal differential pressures and lower figures differential pressures when
the valve is fully closed.
10
Azbil Corporation No. SS2-AGV200-0001
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
3. In the differential pressure column, upper figures show normal differential pressures and lower figures differential pressures when
the valve is fully closed.
11
No. SS2-AGV200-0001 Azbil Corporation
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
3. In the differential pressure column, upper figures show normal differential pressures and lower figures differential pressures when
the valve is fully closed.
12
Azbil Corporation No. SS2-AGV200-0001
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
3. In the differential pressure column, upper figures show normal differential pressures and lower figures differential pressures when
the valve is fully closed.
13
No. SS2-AGV200-0001 Azbil Corporation
Valve seat leakage, Class V and Class IV-S1: high shutoff model: metal seat
Table 18. Model AGVB nominal size 1/2, 3/4 and 1 inch
Air-to-open
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
Table 19. Model AGVB nominal size 1-1/2, 2, 2-1/2, 3 and 4 inches
Air-to-open
Nominal Supply Spring Differential pressure (by port size (inch)) kPa{kgf/cm2}
size Actuator pressure range
1 1-1/4 1-1/2 2 2-1/2 3 4
(inch) kPa {kgf/cm2} kPa {kgf/cm2}
270 80 to 240 1960 1110 660 270
PSA1R -- -- --
{2.8} {0.8 to 2.4} {20.0} {11.3] {6.7} {2.8}
270 80 to 240 1960 1550 810
1-1/2 PSA2R -- -- -- --
{2.8} {0.8 to 2.4} {20.0} {15.8} {8.2}
2 270 80 to 240 1960 1660
PSA3R {2.8} {0.8 to 2.4} -- -- {20.0} {16.9} -- -- --
270 80 to 240 1960
PSA4R -- -- -- -- -- --
{2.8} {0.8 to 2.4} {20.0}
270 80 to 240 1960 1660 910 570 190
PSA3R -- --
{2.8} {0.8 to 2.4} {20.0} {16.9} {9.3} {5.8} {2.0}
2-1/2 270 80 to 240 1960 1790 1200 550
PSA4R -- -- --
{2.8} {0.8 to 2.4} {20.0} {18.2} {12.3} {5.6}
3
260 100 to 180 1960 1850 910
-- -- -- --
4 {2.6} {1.0 to 1.8} {20.0} {18.9} {9.3}
PSA6R
400 200 to 340 1960
-- -- -- -- --
{4.0} {2.0 to 3.5} {20.0}
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
Table 20. Model AGVB nominal size 1/2, 3/4 and 1 inch
Air-to-close
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
14
Azbil Corporation No. SS2-AGV200-0001
Valve seat leakage, Class V and Class IV-S1: high shutoff model: metal seat
Table 21. Model AGVB nominal size 1-1/2, 2, 2-1/2, 3, and 4 inches
Air-to-close
Nominal Supply Spring Differential pressure (by port size (inch)) kPa{kgf/cm2}
size Actuator pressure range
1 1-1/4 1-1/2 2 2-1/2 3 4
(inch) kPa {kgf/cm2} kPa {kgf/cm2}
160 20 to 98 1150 600 310 -- -- -- --
{1.6} {0.2 to 1.0} {11.7} {6.1} {3.2}
PSA1D
390 80 to 240 1960 1100 -- -- --
{4.0} {0.8 to 2.4} {20.0} {11.2}
160 20 to 98 1430 880 410
1-1/2 -- -- --
{1.6} {0.2 to 1.0} {14.6} {9.0} {4.1}
PSA2D
2 390 80 to 240 1960
-- -- -- -- -- --
{4.0} {0.8 to 2.4} {20.0}
160 20 to 98 1790 950
PSA3D -- -- --
{1.6} {0.2 to 1.0} 1960 {18.3} {9.7}
160 20 to 98 {20.0} 1850
PSA4D -- -- --
{1.6} {0.2 to 1.0} {18.9}
160 20 to 98 1790 950 470 260
-- -- --
{1.6} {0.2 to 1.0} {18.2} {9.7} {4.8} {2.6}
2-1/2 PSA3D
390 80 to 240 1960 1830 900
-- --
{4.0} {0.8 to 2.4} {20.0} {18.7} {9.2}
3
160 20 to 98 1850 1030 660 240
-- --
4 {1.6} {0.2 to 1.0} {18.9} {10.5} {6.7} {2.5}
PSA4D
390 80 to 240 1960 1780
-- -- -- -- --
{4.0} {0.8 to 2.4} {20.0} {18.1}
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
Table 22. Model AGVM nominal size 1/2, 3/4 and 1 inch
Air-to-open
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
3. In the differential pressure column, upper figures show normal differential pressures and lower figures differential pressures when
the valve is fully closed.
15
No. SS2-AGV200-0001 Azbil Corporation
Valve seat leakage, Class V and Class IV-S1: high shutoff model: metal seat
Table 23. Model AGVM nominal size 1-1/2, 2, 2-1/2, 3 and 4 inches
Air-to-open
Nominal Supply Spring Differential pressure (by port size (inch)) kPa{kgf/cm2}
size Actuator pressure range
1 1-1/4 1-1/2 2 2-1/2 3 4
(inch) kPa {kgf/cm2} kPa {kgf/cm2}
1960 -- -- --
270 80 to 240 {20.0} 1110 660 270
PSA1R {2.8} {0.8 to 2.4} 1980 {11.3} {6.7} {2.8}
-- -- --
{20.2}
1960{20.0}
270 80 to 240 1550 810
PSA2R 4110 2420 -- -- --
1-1/2 {2.8} {0.8 to 2.4} {15.8} {8.2}
{41.9} {24.7}
2 1960
270 80 to 240 {20.0} 1660
PSA3R -- -- --
{2.8} {0.8 to 2.4} 5100 4520 2970 {16.9}
{52.0} {46.1} {30.3}
1960{20.0}
270 80 to 240
PSA4R -- 5100 3080 -- -- --
{2.8} {0.8 to 2.4}
{52.0} {31.4}
1960
270 80 to 240 {20.0} 1660 910 570 190
PSA3R -- --
{2.8} {0.8 to 2.4} 2970 {16.9} {9.3} {5.8} {2.0}
{30.3}
1960{20.0}
2-1/2 270 80 to 240 1790 1200 550
PSA4R -- -- 5100 3080
{2.8} {0.8 to 2.4} {18.2} {12.3} {5.6}
{52.0} {31.4}
3
1960
4 260 100 to 180 {20.0} 1850 910
-- -- -- --
{2.6} {1.0 to 1.8} 2680 {18.9} {9.3}
PSA6R {27.3}
1960{20.0}
400 200 to 340 -- -- -- 5100 4710 2520
{4.0} {2.0 to 3.5}
{52.0} {48.0} {25.7}
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
3. In the differential pressure column, upper figures show normal differential pressures and lower figures differential pressures when
the valve is fully closed.
Table 24. Model AGVM nominal size 1/2, 3/4 and 1 inch
Air-to-close
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
3. In the differential pressure column, upper figures show normal differential pressures and lower figures differential pressures when
the valve is fully closed.
16
Azbil Corporation No. SS2-AGV200-0001
Valve seat leakage, Class V and Class IV-S1: high shutoff model: metal seat
Table 25. Model AGVM nominal size 1-1/2, 2, 2-1/2, 3 and 4 inches
Air-to-close
Nominal Supply Spring Differential pressure (by port size (inch)) kPa{kgf/cm2}
size Actuator pressure range
1 1-1/4 1-1/2 2 2-1/2 3 4
(inch) kPa {kgf/cm2} kPa {kgf/cm2}
160 20 to 98 1150 600 310 -- -- -- --
{1.6} {0.2 to 1.0} {11.7} {6.1} {3.2}
1960
PSA1D
390 80 to 240 {20.0} 1100 -- -- --
{4.0} {0.8 to 2.4} 5100 3150 2040 {11.2}
{52.0} {32.1} {20.8}
1960
160 20 to 98 {20.0} 1430 880 410 -- -- --
{1.6} {0.2 to 1.0} 2500 {14.6} {9.0} {4.1}
{25.5}
PSA2D
1960
390 80 to 240 {20.0}
-- -- -- --
{4.0} {0.8 to 2.4} 5100 4230 2400
{52.0} {18.2} {24.5}
1-1/2 1960
160 20 to 98 {20.0} 1790 950
2 -- -- --
{1.6} {0.2 to 1.0} 4670 2770 {18.3} {9.7}
{47.6} {28.3}
PSA3D
1960
390 80 to 240 {20.0}
-- -- -- -- --
{4.0} {0.8 to 2.4} 5100 4490
{52.0} {45.8}
1960
20 to 98 {20.0} 1850
160{1.6} -- -- --
{0.2 to 1.0} 5100 5000 3300 {18.9}
{52.0} {51.0} {33.6}
PSA4D
1960
80 to 240 {20.0}
390{4.0} -- -- -- -- -- --
{0.8 to 2.4} 5100
{52.0}
160 20 to 98 1790 950 470 260
-- -- --
{1.6} {0.2 to 1.0} {18.2} {9.7} {4.8} {2.6}
1960
PSA3D
390 80 to 240 {20.0} 1830 900
-- --
{4.0} {0.8 to 2.4} 5100 4490 2660 {18.7} {9.2}
2-1/2 {52.0} {45.8} {27.1}
1960
3 {20.0}
160 20 to 98 1850 1030 660 240
-- --
4 {1.6} {0.2 to 1.0} 3300 {18.9} {10.5} {6.7} {2.5}
{33.6}
PSA4D
1960
390 80 to 240 {20.0} 1770
-- -- --
{4.0} {0.8 to 2.4} 5100 4810 3380 {18.0}
{52.0} {49.1} {34.4}
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
3. In the differential pressure column, upper figures show normal differential pressures and lower figures differential pressures when
the valve is fully closed.
17
No. SS2-AGV200-0001 Azbil Corporation
Valve seat leakage, Class VI: high shutoff model: soft seat
Table 26. Model AGVB nominal size 1/2, 3/4 and 1 inch
Air-to-open
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
Table 27. Model AGVB nominal size 1-1/2, 2, 2-1/2, 3 and 4 inches
Air-to-open
Nominal Supply Spring Differential pressure (by port size (inch)) kPa{kgf/cm2}
size Actuator pressure kPa range
1 1-1/4 1-1/2 2 2-1/2 3 4
(inch) {kgf/cm2} kPa {kgf/cm2}
80 to 240 1030 460 190
PSA1R 270{2.8} -- -- -- --
{0.8 to 2.4} {10.5} {4.7} {1.9}
80 to 240 1960 1740 1270 640
1-1/2 PSA2R 270{2.8} -- -- --
{0.8 to 2.4} {20.0} {17.7} {13.0} {6.5}
2 PSA3R 270{2.8} 80 to 240 -- 1960 1580 -- --
{0.8 to 2.4} {20.0} {16.1}
80 to 240 1960
PSA4R 270{2.8} -- -- -- -- -- --
{0.8 to 2.4} {20.0}
2-1/2 80 to 240 1960 1580 960 640 280
PSA3R 270{2.8} -- --
{0.8 to 2.4} {20.0} {16.1} {9.8} {6.5} {2.9}
3
80 to 240 1960 1920 1450 770
PSA4R 270{2.8} -- -- --
4 {0.8 to 2.4} {20.0} {19.6} {14.8} {7.9}
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
Table 28. Model AGVB nominal size 1/2, 3/4 and 1 inch
Air-to-close
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
18
Azbil Corporation No. SS2-AGV200-0001
Valve seat leakage, Class VI: high shutoff model: soft seat
Table 29. Model AGVB nominal size 1-1/2, 2, 2-1/2, 3, and 4 inches
Air-to-close
Nominal Supply Spring Differential pressure (by port size (inch)) kPa{kgf/cm2}
size Actuator pressure range
1 1-1/4 1-1/2 2 2-1/2 3 4
(inch) kPa {kgf/cm2} kPa {kgf/cm2}
390 80 to 240 1960 1860 1390 730
PSA1D -- -- --
{4.0} {0.8 to 2.4} {20.0} {19.0} {14.2} {7.4}
140 20 to 98 790 310 -- -- -- -- --
{1.4} {0.2 to 1.0} {8.1} {3.2}
160 20 to 98 1750 1170 680 280
PSA2D -- -- --
{1.6} {0.2 to 1.0} {17.8} {11.9} {6.9} {2.9}
390 80 to 240 1960 1860
-- -- --
{4.0} {0.8 to 2.4} {20.0} {18.0}
1-1/2 140 20 to 98 1410 880 400 -- -- --
{1.4} {0.2 to 1.0} 1960 {1.41} {9.0} {4.1}
2
160 20 to 98 {20.0} 1710 1050
PSA3D -- -- --
{1.6} {0.2 to 1.0} {17.4} {10.7}
390 80 to 240 1960
-- -- -- -- -- --
{4.0} {0.8 to 2.4} {20.0}
140 20 to 98 1960 1320 -- -- --
{1.4} {0.2 to 1.0} {20.0} {13.5}
PSA4D
160 20 to 98 -- -- -- -- --
{1.6} {0.2 to 1.0}
140 20 to 98 880 400 150
-- -- -- --
{1.4} {0.2 to 1.0} {9.0} {4.1} {1.5}
160 20 to 98 1710 1050 550 340 110
PSA3D -- --
{1.6} {0.2 to 1.0} {17.4} {10.7} {5.6} {3.5} {1.1}
2-1/2 390 80 to 240 1710 960
-- --
{4.0} {0.8 to 2.4} {17.4} {9.8}
3
140 20 to 98 1960 1320 730 470 190
-- --
4 {1.4} {0.2 to 1.0} {20.0} {13.5} {7.4} {4.8} {1.9}
160 20 to 98 1410 980 480
PSA4D -- --
{1.6} {0.2 to 1.0} {14.4} {10.0} {4.9}
390 80 to 240 1960 1820
-- -- -- --
{4.0} {0.8 to 2.4} {20.0} {18.6}
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
Table 30. Model AGVM nominal size 1/2, 3/4 and 1 inch
Air-to-open
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
3. In the differential pressure column, upper figures show normal differential pressures and lower figures differential pressures when
the valve is fully closed.
19
No. SS2-AGV200-0001 Azbil Corporation
Valve seat leakage, Class VI: high shutoff model: soft seat
Table 31. Model AGVM nominal size 1-1/2, 2, 2-1/2, 3 and 4 inches
Air-to-open
Nominal Supply Spring Differential pressure (by port size (inch)) kPa {kgf/cm2}
size Actuator pressure range
1 1-1/4 1-1/2 2 2-1/2 3 4
(inch) kPa {kgf/cm2} kPa {kgf/cm2}
80 to 240 1030 460 180
PSA1R 270{2.8} -- -- -- --
{0.8 to 2.4} {10.5} {4.7} {0.17}
1960
80 to 240 {20.0} 1740 1270 640
PSA2R 270{2.8} -- -- --
{0.8 to 2.4} 2450 {17.7} {13.0} {6.5}
{25.0}
1-1/2 1960
80 to 240 {20.0} 1580
2 PSA3R 270{2.8} -- -- --
{0.8 to 2.4} 2940 2370 {16.1}
{30.0} {24.2}
1960
80 to 240 {20.0}
PSA4R 270{2.8} -- -- -- -- --
{0.8 to 2.4} 2940 2840
{30.0} {29.0}
1960
80 to 240 {20.0} 1580 960 640 280
2-1/2 PSA3R 270{2.8} -- --
{0.8 to 2.4} 2370 {16.1} {9.8} {6.5} {2.9}
{24.2}
3
1960
4 80 to 240 {20.0} 1920 1450 770
PSA4R 270{2.8} -- --
{0.8 to 2.4} 2940 2.84 {19.6} {14.8} {7.9}
{30.0} {29.0}
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
3. In the differential pressure column, upper figures show normal differential pressures and lower figures differential pressures when
the valve is fully closed.
Table 32. Model AGVM nominal size 1/2, 3/4 and 1 inch
Air-to-close
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
3. In the differential pressure column, upper figures show normal differential pressures and lower figures differential pressures when
the valve is fully closed.
20
Azbil Corporation No. SS2-AGV200-0001
Valve seat leakage, Class VI: high shutoff model: soft seat
Table 33. Model AGVM nominal size 1-1/2, 2, 2-1/2, 3 and 4 inches
Air-to-close
Nominal Supply Spring Differential pressure (by port size (inch)) kPa{kgf/cm2}
size Actuator pressure kPa range
1 1-1/4 1-1/2 2 2-1/2 3 4
(inch) {kgf/cm2} kPa {kgf/cm2}
160 20 to 98 330 -- -- -- -- -- --
{1.6} {0.2 to 1.0} {3.4}
1960
PSA1D
390 80 to 240 {20.0} 1860 1390 730 -- -- --
{4.0} {0.8 to 2.4} 2620 {18.9} {14.2} {7.4}
{26.7}
140 20 to 98 790 310 -- -- -- -- --
{1.4} {0.2 to 1.0} {8.1} {3.2}
160 20 to 98 1750 1170 680 280 -- -- --
{1.6} {0.2 to 1.0} {17.8} {11.9} {6.9} {2.9}
PSA2D
1960
390 80 to 240 {20.0} 1860 -- -- --
{4.0} {0.8 to 2.4} 2940 2780 {19.0}
{30.0} {28.4}
140 20 to 98 1990 1410 880 400
1-1/2 -- -- --
{1.4} {0.2 to 1.0} {20.3} {14.4} {9.0} {4.1}
2 1960
160 20 to 98 {20.0} 1710 1050 -- -- --
{1.6} {0.2 to 1.0} 2940 2290 {17.4} {10.7}
PSA3D {30.0} {23.4}
1960
{20.0} --
390 80 to 240 -- -- -- --
{4.0} {0.8 to 2.4} 2940 --
{30.0}
1960
140 20 to 98 {20.0} 1320 -- -- --
{1.4} {0.2 to 1.0} 2940 2660 1990 {13.5}
{30.0} {27.1} {20.3}
PSA4D
1960
160 20 to 98 {20.0}
-- -- -- --
{1.6} {0.2 to 1.0} 2940 1990
{30.0} {21.3}
140 20 to 98 880 400 150
-- -- -- --
{1.4} {0.2 to 1.0} {9.0} {4.1} {1.5}
160 20 to 98 1710 1050 550 340 110
-- --
{1.6} {0.2 to 1.0} {17.4} {10.7} {5.6} {3.5} {1.1}
PSA3D
1960
390 80 to 240 {20.0} 1710 960
-- --
{4.0} {0.8 to 2.4} 2940 2250 {17.4} {9.8}
2-1/2 {30.0} {22.9}
3 140 20 to 98 1990 1320 730 470 190
-- --
{1.4} {0.2 to 1.0} {20.3} {13.5} {7.4} {4.8} {1.9}
4 1960
160 20 to 98 {20.0} 1410 980 480
-- --
{1.6} {0.2 to 1.0} 2940 2090 {14.4} {10.0} {4.9}
PSA4D
{30.0} {21.3}
1960
390 80 to 240 {20.0} 1820
-- -- -- --
{4.0} {0.8 to 2.4} 2940 {18.6}
{30.0}
Note) 1. In the case of using positioners, please the setting of supply pressure with pressure regulator.
2. Th e maximum allowable differential pressures must not exceed the maximum working pressures specified by JISB2201-1984,
ANSIB16.34-1981, and JPI-7S-65-831.
3. In the differential pressure column, upper figures show normal differential pressures and lower figures differential pressures when
the valve is fully closed.
21
No. SS2-AGV200-0001 Azbil Corporation
6. Accessories
6-1 Hand wheel
Use: The manual hand wheel enables you to open and close the valve manually.
Orientation: Side hand wheel, which is mounted to the yoke of the actuator.
6-2 Positioner
Use: In response to input signals from the controller, the positioner controls the valve accurately and swiftly, switches
between direct and reverse operation, and changes valve characteristics.
Models: According to input signals and applications, select one of the models shown below.
Input/Output
Type Model
signal
AVP7_ _ _
I/P Smart valve positioner AVP3_ _ _
AVP2_ _ _
HTP-_ _
P/P Mechanical VPE_ _
(Applied PSA1 only)
22
Azbil Corporation No. SS2-AGV200-0001
JPI 150 JPI 300 JPI 150 JPI 300 JPI 150 JPI 300 JPI 150 JPI 300
PSA 1 15 16 16 19 17 19 27 32
PSA 2 18 19 19 22 20 22 30 35
PSA 3 -- -- -- -- -- -- 50 55
PSA 4 -- -- -- -- -- -- 68 73
PSA 6 -- -- -- -- -- -- -- --
H
Body size
2 2-1/2 3 4
(inch)
JIS 10K JIS 20K JIS 10K JIS 20K JIS 10K JIS 20K JIS 10K JIS 20K
Pressure
ANSI 150 ANSI 300 ANSI 150 ANSI 300 ANSI 150 ANSI 300 ANSI 150 ANSI 300
rating
Actuator
JPI 150 JPI 300 JPI 150 JPI300 JPI 150 JPI 300 JPI 150 JPI 300
PSA 1 30 33 -- -- -- -- -- --
PSA 2 33 36 -- -- -- -- -- --
PSA 3 53 56 71 77 73 81 89 106
PSA 4 71 74 89 95 91 99 107 124
PSA 6 -- -- 190 197 192 201 208 225 A
Figure 16. Face-to-face dimensions
and overall dimensions
23
No. SS2-AGV200-0001 Azbil Corporation
The overall dimensions and the valve weight will change when a manual hand wheel is mounted. Ins standard mounting, the
position of operation of the side hand wheel is at the back of the actuator (on the side opposite that the valve positioner is
mounted).
Table 36. Hand wheel dimensions
Dimension (mm) Maximum
Type of hand Weight
Actuator driving force of hand wheel
wheel φF K (kg)
N (kgf)
PSA1D, R 200 190 (19)
215 7
PSA2D, R 200 320 (32)
Side hand
PSA3D, R 355 650 (65)
wheel 345 27
PSA4D, R 355 850 (85)
PSA6R 380 307 127 (13) 35
φF
24
Azbil Corporation No. SS2-AGV200-0001
8. Actuator Orientation
(Model PSA_ _ Actuator)
Side-mounted
hand wheel Positioner
Positioner
Flow Flow Flow Flow
direction direction direction direction
25
No. SS2-AGV200-0001 Azbil Corporation
26
Azbil Corporation No. SS2-AGV200-0001
27
Please read “Terms and Conditions” from the following URL
before ordering and use.
https://www.azbil.com/products/factory/order.html
Specifications are subject to change without notice.